* [U-Boot] [PATCH 1/4] imx: cx9020: migrate cx9020 to CONFIG_DM_ETH
2019-10-23 5:40 [U-Boot] [PATCH 0/4] Migrate cx9020 to DM_ETH, DM_USB and distro boot linux-kernel-dev at beckhoff.com
@ 2019-10-23 5:40 ` linux-kernel-dev at beckhoff.com
2019-10-23 5:40 ` [U-Boot] [PATCH 2/4] imx: cx9020: migrate cx9020 to CONFIG_DM_USB linux-kernel-dev at beckhoff.com
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: linux-kernel-dev at beckhoff.com @ 2019-10-23 5:40 UTC (permalink / raw)
To: u-boot
From: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
---
arch/arm/dts/imx53-cx9020.dts | 31 ++++++++++++++++++++-----------
configs/mx53cx9020_defconfig | 2 ++
include/configs/mx53cx9020.h | 4 ----
3 files changed, 22 insertions(+), 15 deletions(-)
diff --git a/arch/arm/dts/imx53-cx9020.dts b/arch/arm/dts/imx53-cx9020.dts
index 36ceae36aa9..2b7f7288088 100644
--- a/arch/arm/dts/imx53-cx9020.dts
+++ b/arch/arm/dts/imx53-cx9020.dts
@@ -99,17 +99,6 @@
MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
- MX53_PAD_FEC_MDC__FEC_MDC 0x4
- MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180
- MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180
- MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180
- MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180
- MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4
- MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4
- MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4
-
MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec
MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec
@@ -148,6 +137,21 @@
>;
};
+ pinctrl_fec0: fec0grp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x4
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4
+ >;
+ };
+
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
@@ -209,5 +213,10 @@
pinctrl-names = "default";
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
+ pinctrl-0 = <&pinctrl_fec0>;
status = "okay";
+ fixed-link { /* RMII fixed link to KZ8863 */
+ speed = <100>;
+ full-duplex;
+ };
};
diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig
index 4ed38250f31..17c44bd070a 100644
--- a/configs/mx53cx9020_defconfig
+++ b/configs/mx53cx9020_defconfig
@@ -28,7 +28,9 @@ CONFIG_FPGA_CYCLON2=y
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC_IMX=y
+CONFIG_DM_ETH=y
CONFIG_FEC_MXC=y
+CONFIG_PHYLIB=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX5=y
diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h
index bbe05740330..f1007915118 100644
--- a/include/configs/mx53cx9020.h
+++ b/include/configs/mx53cx9020.h
@@ -35,10 +35,6 @@
/* bootz: zImage/initrd.img support */
-/* Eth Configs */
-#define IMX_FEC_BASE FEC_BASE_ADDR
-#define CONFIG_ETHPRIME "FEC0"
-#define CONFIG_FEC_MXC_PHYADDR 0x1F
/* USB Configs */
#define CONFIG_MXC_USB_PORT 1
--
2.23.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [U-Boot] [PATCH 2/4] imx: cx9020: migrate cx9020 to CONFIG_DM_USB
2019-10-23 5:40 [U-Boot] [PATCH 0/4] Migrate cx9020 to DM_ETH, DM_USB and distro boot linux-kernel-dev at beckhoff.com
2019-10-23 5:40 ` [U-Boot] [PATCH 1/4] imx: cx9020: migrate cx9020 to CONFIG_DM_ETH linux-kernel-dev at beckhoff.com
@ 2019-10-23 5:40 ` linux-kernel-dev at beckhoff.com
2019-10-23 5:40 ` [U-Boot] [PATCH 3/4] imx: cx9020: enable vidconsole by default linux-kernel-dev at beckhoff.com
2019-10-23 5:40 ` [U-Boot] [PATCH 4/4] imx: cx9020: use distro boot linux-kernel-dev at beckhoff.com
3 siblings, 0 replies; 6+ messages in thread
From: linux-kernel-dev at beckhoff.com @ 2019-10-23 5:40 UTC (permalink / raw)
To: u-boot
From: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Note: gpio7_8 was never used for usb power regulator so we remove it here
Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
---
arch/arm/dts/imx53-cx9020.dts | 11 ++++++++++-
board/beckhoff/mx53cx9020/mx53cx9020.c | 10 ----------
configs/mx53cx9020_defconfig | 6 ++++++
3 files changed, 16 insertions(+), 11 deletions(-)
diff --git a/arch/arm/dts/imx53-cx9020.dts b/arch/arm/dts/imx53-cx9020.dts
index 2b7f7288088..e08850999b1 100644
--- a/arch/arm/dts/imx53-cx9020.dts
+++ b/arch/arm/dts/imx53-cx9020.dts
@@ -36,7 +36,6 @@
MX53_PAD_GPIO_1__GPIO1_1 0x80000000
MX53_PAD_GPIO_4__GPIO1_4 0x80000000
MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
- MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
MX53_PAD_GPIO_16__GPIO7_11 0x80000000
MX53_PAD_EIM_OE__EMI_WEIM_OE 0x80000000
@@ -220,3 +219,13 @@
full-duplex;
};
};
+
+&usbh1 {
+ phy_type = "utmi";
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "host";
+ status = "okay";
+};
diff --git a/board/beckhoff/mx53cx9020/mx53cx9020.c b/board/beckhoff/mx53cx9020/mx53cx9020.c
index 9450d925f6f..caffd5c9ee8 100644
--- a/board/beckhoff/mx53cx9020/mx53cx9020.c
+++ b/board/beckhoff/mx53cx9020/mx53cx9020.c
@@ -127,16 +127,6 @@ static void setup_gpio_leds(void)
gpio_direction_output(GPIO_LED_PWR_G, 0);
}
-#ifdef CONFIG_USB_EHCI_MX5
-int board_ehci_hcd_init(int port)
-{
- /* request VBUS power enable pin, GPIO7_8 */
- gpio_direction_output(IMX_GPIO_NR(7, 8), 1);
- return 0;
-}
-#endif
-
-
static int power_init(void)
{
/* nothing to do on CX9020 */
diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig
index 17c44bd070a..6087ed81ec9 100644
--- a/configs/mx53cx9020_defconfig
+++ b/configs/mx53cx9020_defconfig
@@ -19,7 +19,13 @@ CONFIG_CMD_PXE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_MX5=y
+CONFIG_USB_STORAGE=y
+CONFIG_DM_REGULATOR=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx53-cx9020"
CONFIG_ENV_IS_IN_MMC=y
--
2.23.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [U-Boot] [PATCH 3/4] imx: cx9020: enable vidconsole by default
2019-10-23 5:40 [U-Boot] [PATCH 0/4] Migrate cx9020 to DM_ETH, DM_USB and distro boot linux-kernel-dev at beckhoff.com
2019-10-23 5:40 ` [U-Boot] [PATCH 1/4] imx: cx9020: migrate cx9020 to CONFIG_DM_ETH linux-kernel-dev at beckhoff.com
2019-10-23 5:40 ` [U-Boot] [PATCH 2/4] imx: cx9020: migrate cx9020 to CONFIG_DM_USB linux-kernel-dev at beckhoff.com
@ 2019-10-23 5:40 ` linux-kernel-dev at beckhoff.com
2019-10-23 5:40 ` [U-Boot] [PATCH 4/4] imx: cx9020: use distro boot linux-kernel-dev at beckhoff.com
3 siblings, 0 replies; 6+ messages in thread
From: linux-kernel-dev at beckhoff.com @ 2019-10-23 5:40 UTC (permalink / raw)
To: u-boot
From: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
---
configs/mx53cx9020_defconfig | 1 +
include/configs/mx53cx9020.h | 3 +++
2 files changed, 4 insertions(+)
diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig
index 6087ed81ec9..d9c0637110e 100644
--- a/configs/mx53cx9020_defconfig
+++ b/configs/mx53cx9020_defconfig
@@ -43,3 +43,4 @@ CONFIG_PINCTRL_IMX5=y
CONFIG_MXC_UART=y
CONFIG_DM_VIDEO=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SYS_WHITE_ON_BLACK=y
diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h
index f1007915118..5f35be5ab00 100644
--- a/include/configs/mx53cx9020.h
+++ b/include/configs/mx53cx9020.h
@@ -53,6 +53,9 @@
"pxefile_addr_r=0x73000000\0" \
"ramdisk_addr_r=0x72000000\0" \
"console=ttymxc1,115200\0" \
+ "stdin=serial\0" \
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0" \
"uenv=/boot/uEnv.txt\0" \
"optargs=\0" \
"cmdline=\0" \
--
2.23.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 4/4] imx: cx9020: use distro boot
2019-10-23 5:40 [U-Boot] [PATCH 0/4] Migrate cx9020 to DM_ETH, DM_USB and distro boot linux-kernel-dev at beckhoff.com
` (2 preceding siblings ...)
2019-10-23 5:40 ` [U-Boot] [PATCH 3/4] imx: cx9020: enable vidconsole by default linux-kernel-dev at beckhoff.com
@ 2019-10-23 5:40 ` linux-kernel-dev at beckhoff.com
3 siblings, 0 replies; 6+ messages in thread
From: linux-kernel-dev at beckhoff.com @ 2019-10-23 5:40 UTC (permalink / raw)
To: u-boot
From: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
We switch from custom boot commands relying on uEnv.txt to distro boot.
This removes the automatic fpga bitstream loading in favor of loading
bitstreams via custom bootscripts (boot.scr) or after booting the
kernel.
Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
---
Checkpatch complains with:
> include/configs/mx53cx9020.h:51: check: Macro argument reuse 'func' - possible side-effects?
Is this expected? I can't see what's wrong though i may have missed
something obvious.
configs/mx53cx9020_defconfig | 1 +
include/configs/mx53cx9020.h | 88 +++++++-----------------------------
2 files changed, 17 insertions(+), 72 deletions(-)
diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig
index d9c0637110e..ef5cb9775a2 100644
--- a/configs/mx53cx9020_defconfig
+++ b/configs/mx53cx9020_defconfig
@@ -7,6 +7,7 @@ CONFIG_NR_DRAM_BANKS=2
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/beckhoff/mx53cx9020/imximage.cfg"
CONFIG_BOOTDELAY=1
CONFIG_USE_PREBOOT=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h
index 5f35be5ab00..db40fe71b36 100644
--- a/include/configs/mx53cx9020.h
+++ b/include/configs/mx53cx9020.h
@@ -21,7 +21,7 @@
#define CONFIG_SYS_FSL_CLK
/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)
#define CONFIG_REVISION_TAG
@@ -48,83 +48,27 @@
#define CONFIG_LOADADDR 0x70010000 /* loadaddr env var */
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(MMC, mmc, 1) \
+ func(USB, usb, 0) \
+ func(PXE, pxe, na)
+
+#include <config_distro_bootcmd.h>
+
#define CONFIG_EXTRA_ENV_SETTINGS \
- "fdt_addr_r=0x71ff0000\0" \
+ "fdt_addr_r=0x75000000\0" \
"pxefile_addr_r=0x73000000\0" \
- "ramdisk_addr_r=0x72000000\0" \
+ "scriptaddr=0x74000000\0" \
+ "ramdisk_addr_r=0x80000000\0" \
+ "kernel_addr_r=0x72000000\0" \
+ "fdt_high=0xffffffff\0" \
"console=ttymxc1,115200\0" \
"stdin=serial\0" \
"stdout=serial,vidconsole\0" \
"stderr=serial,vidconsole\0" \
- "uenv=/boot/uEnv.txt\0" \
- "optargs=\0" \
- "cmdline=\0" \
- "mmcdev=0\0" \
- "mmcpart=1\0" \
- "mmcrootfstype=ext4 rootwait fixrtc\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "root=/dev/mmcblk${mmcdev}p${mmcpart} ro " \
- "rootfstype=${mmcrootfstype} " \
- "${cmdline}\0" \
- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
- "loadpxe=dhcp;setenv kernel_addr_r ${loadaddr};pxe get;pxe boot;\0" \
- "loadrd=load mmc ${bootpart} ${ramdisk_addr_r} ${bootdir}/${rdfile};" \
- "setenv rdsize ${filesize}\0" \
- "loadfdt=echo loading ${fdt_path} ...;" \
- "load mmc ${bootpart} ${fdt_addr_r} ${fdt_path}\0" \
- "mmcboot=mmc dev ${mmcdev}; " \
- "if mmc rescan; then " \
- "echo SD/MMC found on device ${mmcdev};" \
- "echo Checking for: ${uenv} ...;" \
- "setenv bootpart ${mmcdev}:${mmcpart};" \
- "if test -e mmc ${bootpart} ${uenv}; then " \
- "load mmc ${bootpart} ${loadaddr} ${uenv};" \
- "env import -t ${loadaddr} ${filesize};" \
- "echo Loaded environment from ${uenv};" \
- "if test -n ${dtb}; then " \
- "setenv fdt_file ${dtb};" \
- "echo Using: dtb=${fdt_file} ...;" \
- "fi;" \
- "echo Checking for uname_r in ${uenv}...;" \
- "if test -n ${uname_r}; then " \
- "echo Running uname_boot ...;" \
- "run uname_boot;" \
- "fi;" \
- "fi;" \
- "fi;\0" \
- "uname_boot="\
- "setenv bootdir /boot; " \
- "setenv bootfile vmlinuz-${uname_r}; " \
- "setenv ccatfile /boot/ccat.rbf; " \
- "echo loading CCAT firmware from ${ccatfile}; " \
- "load mmc ${bootpart} ${loadaddr} ${ccatfile}; " \
- "fpga load 0 ${loadaddr} ${filesize}; " \
- "if test -e mmc ${bootpart} ${bootdir}/${bootfile}; then " \
- "echo loading ${bootdir}/${bootfile} ...; " \
- "run loadimage;" \
- "setenv fdt_path /boot/dtbs/${uname_r}/${fdt_file}; " \
- "if test -e mmc ${bootpart} ${fdt_path}; then " \
- "run loadfdt;" \
- "else " \
- "echo; echo unable to find ${fdt_file} ...;" \
- "echo booting legacy ...;"\
- "run mmcargs;" \
- "echo debug: [${bootargs}] ... ;" \
- "echo debug: [bootz ${loadaddr}] ... ;" \
- "bootz ${loadaddr}; " \
- "fi;" \
- "run mmcargs;" \
- "echo debug: [${bootargs}] ... ;" \
- "echo debug: [bootz ${loadaddr} - ${fdt_addr_r}];" \
- "bootz ${loadaddr} - ${fdt_addr_r}; " \
- "else " \
- "echo loading from dhcp ...; " \
- "run loadpxe; " \
- "fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
- "run mmcboot;"
+ "fdtfile=imx53-cx9020.dtb\0" \
+ BOOTENV
#define CONFIG_ARP_TIMEOUT 200UL
--
2.23.0
^ permalink raw reply related [flat|nested] 6+ messages in thread