[U-Boot] [PATCH] spl: spl_mmc: fix getting raw_sect when boot from emmc boot partition

[Lukasz Majewski <lukma@denx.de>]

Hi Peng,

> On i.MX8, when booting from eMMC boot partition, the whole flash.bin
> is stored in boot partition, however SPL switches to user partition
> during the init of mmc driver:
>   spl_mmc_load() -> mmc_init()
> 
> Then it tries to load the container image in
> spl_mmc_get_uboot_raw_sector(), but here it reads the data from user
> partition and the header is not recognized as a valid header.
> 
> So we move spl_mmc_get_uboot_raw_sector after eMMC partition switch
> to address this issue.
> 
> Anyway put spl_mmc_get_uboot_raw_sector before eMMC partition switch
> is not correct, so let's move it after eMMC partition switch.
> 

I assume that this change is not causing regressions on other i.MX
boards? (Like i.MX6Q or i.MX53)

> Reported-by: Anatolij Gustschin <agust@denx.de>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  common/spl/spl_mmc.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
> index 34e1e73d80..2ede096e61 100644
> --- a/common/spl/spl_mmc.c
> +++ b/common/spl/spl_mmc.c
> @@ -343,8 +343,6 @@ int spl_mmc_load(struct spl_image_info *spl_image,
>  		}
>  	}
>  
> -	raw_sect = spl_mmc_get_uboot_raw_sector(mmc);
> -
>  	boot_mode = spl_boot_mode(bootdev->boot_device);
>  	err = -EINVAL;
>  	switch (boot_mode) {
> @@ -383,6 +381,9 @@ int spl_mmc_load(struct spl_image_info *spl_image,
>  			if (!err)
>  				return err;
>  		}
> +
> +		raw_sect = spl_mmc_get_uboot_raw_sector(mmc);
> +
>  #ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
>  		err = mmc_load_image_raw_partition(spl_image, mmc,
> raw_part, raw_sect);




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191023/8e4e3617/attachment.sig>