From: Heiko Stuebner <heiko@sntech.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 05/12] net: gmac_rockchip: add support for px30
Date: Fri, 25 Oct 2019 01:27:56 +0200 [thread overview]
Message-ID: <20191024232803.10338-6-heiko@sntech.de> (raw)
In-Reply-To: <20191024232803.10338-1-heiko@sntech.de>
Add the glue code to allow the px30 variant of the Rockchip gmac
to provide network functionality.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
---
drivers/net/gmac_rockchip.c | 69 +++++++++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/drivers/net/gmac_rockchip.c b/drivers/net/gmac_rockchip.c
index 26a6121175..3f3e38a2c6 100644
--- a/drivers/net/gmac_rockchip.c
+++ b/drivers/net/gmac_rockchip.c
@@ -14,6 +14,7 @@
#include <asm/arch-rockchip/periph.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/grf_px30.h>
#include <asm/arch-rockchip/grf_rk322x.h>
#include <asm/arch-rockchip/grf_rk3288.h>
#include <asm/arch-rockchip/grf_rk3328.h>
@@ -72,6 +73,47 @@ static int gmac_rockchip_ofdata_to_platdata(struct udevice *dev)
return designware_eth_ofdata_to_platdata(dev);
}
+static int px30_gmac_fix_mac_speed(struct dw_eth_dev *priv)
+{
+ struct px30_grf *grf;
+ struct clk clk_speed;
+ int speed, ret;
+ enum {
+ PX30_GMAC_SPEED_SHIFT = 0x2,
+ PX30_GMAC_SPEED_MASK = BIT(2),
+ PX30_GMAC_SPEED_10M = 0,
+ PX30_GMAC_SPEED_100M = BIT(2),
+ };
+
+ ret = clk_get_by_name(priv->phydev->dev, "clk_mac_speed",
+ &clk_speed);
+ if (ret)
+ return ret;
+
+ switch (priv->phydev->speed) {
+ case 10:
+ speed = PX30_GMAC_SPEED_10M;
+ ret = clk_set_rate(&clk_speed, 2500000);
+ if (ret)
+ return ret;
+ break;
+ case 100:
+ speed = PX30_GMAC_SPEED_100M;
+ ret = clk_set_rate(&clk_speed, 25000000);
+ if (ret)
+ return ret;
+ break;
+ default:
+ debug("Unknown phy speed: %d\n", priv->phydev->speed);
+ return -EINVAL;
+ }
+
+ grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+ rk_clrsetreg(&grf->mac_con1, PX30_GMAC_SPEED_MASK, speed);
+
+ return 0;
+}
+
static int rk3228_gmac_fix_mac_speed(struct dw_eth_dev *priv)
{
struct rk322x_grf *grf;
@@ -257,6 +299,22 @@ static int rv1108_set_rmii_speed(struct dw_eth_dev *priv)
return 0;
}
+static void px30_gmac_set_to_rmii(struct gmac_rockchip_platdata *pdata)
+{
+ struct px30_grf *grf;
+ enum {
+ PX30_GMAC_PHY_INTF_SEL_SHIFT = 4,
+ PX30_GMAC_PHY_INTF_SEL_MASK = GENMASK(4, 6),
+ PX30_GMAC_PHY_INTF_SEL_RMII = BIT(6),
+ };
+
+ grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+
+ rk_clrsetreg(&grf->mac_con1,
+ PX30_GMAC_PHY_INTF_SEL_MASK,
+ PX30_GMAC_PHY_INTF_SEL_RMII);
+}
+
static void rk3228_gmac_set_to_rgmii(struct gmac_rockchip_platdata *pdata)
{
struct rk322x_grf *grf;
@@ -445,6 +503,10 @@ static int gmac_rockchip_probe(struct udevice *dev)
ulong rate;
int ret;
+ ret = clk_set_defaults(dev);
+ if (ret)
+ debug("%s clk_set_defaults failed %d\n", __func__, ret);
+
ret = clk_get_by_index(dev, 0, &clk);
if (ret)
return ret;
@@ -569,6 +631,11 @@ const struct eth_ops gmac_rockchip_eth_ops = {
.write_hwaddr = designware_eth_write_hwaddr,
};
+const struct rk_gmac_ops px30_gmac_ops = {
+ .fix_mac_speed = px30_gmac_fix_mac_speed,
+ .set_to_rmii = px30_gmac_set_to_rmii,
+};
+
const struct rk_gmac_ops rk3228_gmac_ops = {
.fix_mac_speed = rk3228_gmac_fix_mac_speed,
.set_to_rgmii = rk3228_gmac_set_to_rgmii,
@@ -600,6 +667,8 @@ const struct rk_gmac_ops rv1108_gmac_ops = {
};
static const struct udevice_id rockchip_gmac_ids[] = {
+ { .compatible = "rockchip,px30-gmac",
+ .data = (ulong)&px30_gmac_ops },
{ .compatible = "rockchip,rk3228-gmac",
.data = (ulong)&rk3228_gmac_ops },
{ .compatible = "rockchip,rk3288-gmac",
--
2.23.0
next prev parent reply other threads:[~2019-10-24 23:27 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-24 23:27 [U-Boot] [PATCH 00/12] rockchip: add support for px30 Heiko Stuebner
2019-10-24 23:27 ` [U-Boot] [PATCH 01/12] spl: separate SPL_FRAMEWORK config for spl and tpl Heiko Stuebner
2019-10-25 1:55 ` Kever Yang
2019-10-24 23:27 ` [U-Boot] [PATCH 02/12] rockchip: add core px30 headers Heiko Stuebner
2019-10-25 2:04 ` Kever Yang
2019-10-24 23:27 ` [U-Boot] [PATCH 03/12] pinctrl: rockchip: add px30 pinctrl driver Heiko Stuebner
2019-10-25 2:07 ` Kever Yang
2019-10-24 23:27 ` [U-Boot] [PATCH 04/12] rockchip: clk: add px30 clock driver Heiko Stuebner
2019-10-24 23:27 ` Heiko Stuebner [this message]
2019-10-25 2:09 ` [U-Boot] [PATCH 05/12] net: gmac_rockchip: add support for px30 Kever Yang
2019-10-24 23:27 ` [U-Boot] [PATCH 06/12] rockchip: mkimage: " Heiko Stuebner
2019-10-25 2:09 ` Kever Yang
2019-10-24 23:27 ` [U-Boot] [PATCH 07/12] misc: add driver for the Rockchip otp controller Heiko Stuebner
2019-10-25 2:10 ` Kever Yang
2019-10-24 23:27 ` [U-Boot] [PATCH 08/12] rockchip: misc: read cpuid either from efuse or otp Heiko Stuebner
2019-10-25 2:11 ` Kever Yang
2019-10-24 23:28 ` [U-Boot] [PATCH 09/12] rockchip: ram: add dm-based sdram driver Heiko Stuebner
2019-10-24 23:28 ` [U-Boot] [PATCH 10/12] rockchip: add px30 devicetrees Heiko Stuebner
2019-10-25 2:39 ` Kever Yang
2019-10-24 23:28 ` [U-Boot] [PATCH 11/12] rockchip: add px30 architecture core Heiko Stuebner
2019-10-25 2:49 ` Kever Yang
2019-10-25 7:47 ` Heiko Stübner
2019-11-10 14:13 ` Kever Yang
2019-11-10 14:46 ` Heiko Stuebner
2019-10-24 23:28 ` [U-Boot] [PATCH 12/12] rockchip: add px30-evb board Heiko Stuebner
2019-10-25 2:51 ` Kever Yang
2019-10-25 1:44 ` [U-Boot] [PATCH 00/12] rockchip: add support for px30 Kever Yang
2019-11-18 2:57 ` Kever Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191024232803.10338-6-heiko@sntech.de \
--to=heiko@sntech.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox