From: Suneel Garapati <suneelglinux@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC PATCH 16/29] drivers: ata: ahci: fill upper 32bit buffer address in sg descriptor
Date: Tue, 29 Oct 2019 14:08:08 -0700 [thread overview]
Message-ID: <20191029210821.1954-17-suneelglinux@gmail.com> (raw)
In-Reply-To: <20191029210821.1954-1-suneelglinux@gmail.com>
From: Suneel Garapati <sgarapati@marvell.com>
For platforms that support 64bit physical address, fill upper 32bit
of buffer address in scatter-gather descriptor. This is needed for
platforms with more than 4GB DRAM.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
---
drivers/ata/ahci.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index ca075b58bc..5f929700c0 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -506,6 +506,11 @@ static int ahci_fill_sg(struct ahci_uc_priv *uc_priv, u8 port,
ahci_sg->addr =
cpu_to_le32((unsigned long) buf + i * MAX_DATA_BYTE_COUNT);
ahci_sg->addr_hi = 0;
+#ifdef CONFIG_PHYS_64BIT
+ ahci_sg->addr_hi =
+ cpu_to_le32((u32)(((u64)(buf + i * MAX_DATA_BYTE_COUNT)
+ >> 16) >> 16));
+#endif
ahci_sg->flags_size = cpu_to_le32(0x3fffff &
(buf_len < MAX_DATA_BYTE_COUNT
? (buf_len - 1)
--
2.23.0
next prev parent reply other threads:[~2019-10-29 21:08 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-29 21:07 [U-Boot] [RFC PATCH 00/29] arm: Introduce Marvell/Cavium OcteonTX Suneel Garapati
2019-10-29 21:07 ` [U-Boot] [RFC PATCH 01/29] include: pci_ids: add vendor ID for Cavium Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:07 ` [U-Boot] [RFC PATCH 02/29] include: pci: Increase max pci region limit Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:07 ` [U-Boot] [RFC PATCH 03/29] fdtdec: add API to read pci bus-range property Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:07 ` [U-Boot] [RFC PATCH 04/29] drivers: pci-uclass: fix incorrect argument in map_sysmem Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:07 ` [U-Boot] [RFC PATCH 05/29] drivers: pci-uclass: make DT subnode parse optional Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:07 ` [U-Boot] [RFC PATCH 06/29] drivers: pci-uclass: add multi entry support for pci regions Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:07 ` [U-Boot] [RFC PATCH 07/29] drivers: pci-uclass: add support for Enhanced Allocation in Bridges Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 08/29] drivers: pci-uclass: add support for Single-Root I/O Virtualizaiton Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 09/29] drivers: pci-uclass: add VF map_bar support for Enhanced Allocation Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 10/29] drivers: pci-uclass: Add support for Alternate-RoutingID capability Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 11/29] include: arm: asm: io: add 64bit clrbits and setbits helpers Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 12/29] drivers: rtc: ds1337: add driver model support Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 13/29] arch: include: octeontx: add headers for OcteonTX Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-11-20 5:47 ` [U-Boot] [EXT] " Aaron Williams
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 14/29] arch: include: octeontx2: add headers for OcteonTX2 Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 15/29] drivers: ata: ahci: update max id if it is more than available ports Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:08 ` Suneel Garapati [this message]
2019-11-20 3:00 ` [U-Boot] [RFC PATCH 16/29] drivers: ata: ahci: fill upper 32bit buffer address in sg descriptor Simon Glass
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 17/29] drivers: ata: ahci: add BAR index quirk for OcteonTX Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 18/29] drivers: pci: add PCI controller driver " Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 19/29] drivers: gpio: add GPIO " Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 20/29] drivers: i2c: add I2C " Suneel Garapati
2019-11-20 3:00 ` Simon Glass
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 21/29] drivers: spi: add SPI " Suneel Garapati
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 22/29] drivers: mmc: remove static qualifier on mmc_power_init Suneel Garapati
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 23/29] drivers: mmc: add MMC controller driver for OcteonTX Suneel Garapati
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 24/29] drivers: mtd: nand: add NAND " Suneel Garapati
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 25/29] drivers: net: add NIC " Suneel Garapati
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 26/29] drivers: net: add NIC controller driver for OcteonTX2 Suneel Garapati
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 27/29] drivers: watchdog: add reset support for OcteonTX Suneel Garapati
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 28/29] octeontx: Add support for OcteonTX SoC platforms Suneel Garapati
2019-10-29 21:08 ` [U-Boot] [RFC PATCH 29/29] octeontx2: Add support for OcteonTX2 " Suneel Garapati
2019-10-30 17:06 ` [U-Boot] [RFC PATCH 00/29] arm: Introduce Marvell/Cavium OcteonTX Tim Harvey
2019-10-31 0:04 ` [U-Boot] [EXT] " Aaron Williams
2019-10-31 19:12 ` Tim Harvey
2019-10-31 19:22 ` Chandrakala Chavva
2019-11-05 1:09 ` Aaron Williams
2019-11-05 16:07 ` Tim Harvey
2019-10-31 19:46 ` [U-Boot] " Suneel Garapati
2019-10-31 22:14 ` Tim Harvey
2019-10-31 22:40 ` Suneel Garapati
2019-11-01 16:07 ` Tim Harvey
2019-11-19 18:55 ` Tim Harvey
2019-11-20 3:00 ` Simon Glass
2019-11-20 20:41 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191029210821.1954-17-suneelglinux@gmail.com \
--to=suneelglinux@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox