From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 15/29] imx6: aristainetos: enable DM_ETH
Date: Sun, 1 Dec 2019 11:23:18 +0100 [thread overview]
Message-ID: <20191201102332.21397-16-hs@denx.de> (raw)
In-Reply-To: <20191201102332.21397-1-hs@denx.de>
enable DM_ETH and remove unneeded board code.
Signed-off-by: Heiko Schocher <hs@denx.de>
---
board/aristainetos/aristainetos.c | 35 +------------------------------
configs/aristainetos2_defconfig | 2 ++
2 files changed, 3 insertions(+), 34 deletions(-)
diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c
index 5bb238b073..f08f09e17f 100644
--- a/board/aristainetos/aristainetos.c
+++ b/board/aristainetos/aristainetos.c
@@ -19,8 +19,6 @@
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/video.h>
-#include <miiphy.h>
-#include <netdev.h>
#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/crm_regs.h>
#include <linux/fb.h>
@@ -32,6 +30,7 @@
#include <dm/root.h>
#include <env.h>
#include <micrel.h>
+#include <miiphy.h>
#include <video.h>
#include <../drivers/video/imx/ipu.h>
#if defined(CONFIG_VIDEO_BMP_LOGO)
@@ -41,9 +40,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
- PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
@@ -86,24 +82,6 @@ struct i2c_pads_info i2c_pad_info4 = {
}
};
-iomux_v3_cfg_t const enet_pads[] = {
- MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
-};
-
static iomux_v3_cfg_t const backlight_pads[] = {
/* backlight PWM brightness control */
MX6_PAD_GPIO_9__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL),
@@ -113,11 +91,6 @@ static iomux_v3_cfg_t const backlight_pads[] = {
MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
-static void setup_iomux_enet(void)
-{
- imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
-}
-
static iomux_v3_cfg_t const display_pads[] = {
MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(DISP_PAD_CTRL),
MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
@@ -174,12 +147,6 @@ int board_phy_config(struct phy_device *phydev)
return 0;
}
-int board_eth_init(bd_t *bis)
-{
- setup_iomux_enet();
- return cpu_eth_init(bis);
-}
-
static int rotate_logo_one(unsigned char *out, unsigned char *in)
{
int i, j;
diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig
index d89b99b53d..47d1efca56 100644
--- a/configs/aristainetos2_defconfig
+++ b/configs/aristainetos2_defconfig
@@ -76,7 +76,9 @@ CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_ETH=y
CONFIG_MII=y
+CONFIG_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_DM_PMIC=y
--
2.21.0
next prev parent reply other threads:[~2019-12-01 10:23 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-01 10:23 [U-Boot] [PATCH v1 00/29] convert aristainetos board to DM Heiko Schocher
2019-12-01 10:23 ` [U-Boot] [PATCH v1 01/29] imx6: remove aristainetos board Heiko Schocher
2019-12-29 10:25 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 02/29] video: lg4573: convert to DM Heiko Schocher
2019-12-29 10:25 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 03/29] imx6: aristainetos: move defines to Kconfig Heiko Schocher
2019-12-29 10:27 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 04/29] imx6: aristainetos: remove 2b version Heiko Schocher
2019-12-29 10:25 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 05/29] imx6: aristainetos: disable gigabit support Heiko Schocher
2019-12-29 10:24 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 06/29] imx6: aristainetos: add device tree from linux Heiko Schocher
2019-12-29 10:28 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 07/29] imx6: aristainetos: add thumb build Heiko Schocher
2019-12-29 10:26 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 08/29] imx6: aristainetos: remove aristainetos-v2.c Heiko Schocher
2019-12-29 10:25 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 09/29] imx6: aristainetos: prepare dts for other board versions Heiko Schocher
2019-12-29 10:27 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 10/29] imx6: aristainetos: add DM_SERIAL support Heiko Schocher
2019-12-29 10:27 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 11/29] imx6: aristainetos: convert to DM_MMC Heiko Schocher
2019-12-29 10:27 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 12/29] imx6: aristainetos: convert gpio pins to DM and DTS Heiko Schocher
2019-12-29 10:28 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 13/29] imx6: aristainetos: convert to DM_USB Heiko Schocher
2019-12-29 10:27 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 14/29] imx6: aristainetos: convert CONFIG_DM_SPI Heiko Schocher
2019-12-29 10:27 ` sbabic at denx.de
2019-12-01 10:23 ` Heiko Schocher [this message]
2019-12-29 10:26 ` [U-Boot] [PATCH v1 15/29] imx6: aristainetos: enable DM_ETH sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 16/29] imx6: aristainetos: add DM_VIDEO support Heiko Schocher
2019-12-29 10:28 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 17/29] imx6: aristainetos: add DM_I2C support Heiko Schocher
2019-12-29 10:24 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 18/29] imx6: aristainetos: convert to DM_PWM/DM_BACKLIGHT Heiko Schocher
2019-12-29 10:26 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 19/29] imx6: aristainetos: get rid of CONFIG_BOARDNAME Heiko Schocher
2019-12-29 10:26 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 20/29] imx6: aristainetos: add i2c eeprom support Heiko Schocher
2019-12-29 10:28 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 21/29] imx6: aristainetos: add AUTOBOOT_KEYED Heiko Schocher
2019-12-29 10:28 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 22/29] imx6: aristainetos: add version variable Heiko Schocher
2019-12-29 10:24 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 23/29] imx6: aristainetos: cleanup bootmode settings Heiko Schocher
2019-12-29 10:24 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 24/29] imx6: aristainetos: WDT DM conversion enable WDT reset Heiko Schocher
2019-12-29 10:27 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 25/29] imx6: aristainetos: cleanup default Environment Heiko Schocher
2019-12-29 10:28 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 26/29] imx6: aristainetos: enable HAB boot Heiko Schocher
2019-12-29 10:25 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 27/29] imx6: aristainetos: readd aristainetos 2b board Heiko Schocher
2019-12-29 10:26 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 28/29] imx6: aristainetos: add aristainetos 2b csl Heiko Schocher
2019-12-29 10:29 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 29/29] imx6: aristainetos: add support for rev C board Heiko Schocher
2019-12-29 10:25 ` sbabic at denx.de
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191201102332.21397-16-hs@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox