From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 25/29] imx6: aristainetos: cleanup default Environment
Date: Sun, 1 Dec 2019 11:23:28 +0100 [thread overview]
Message-ID: <20191201102332.21397-26-hs@denx.de> (raw)
In-Reply-To: <20191201102332.21397-1-hs@denx.de>
sync defaut Envoronment with customer changes.
Unfortunately they are not changeable, as already
board is in production mode.
Get rid of the big bootcommand and set bootcommand
through Kconfig option.
Signed-off-by: Heiko Schocher <hs@denx.de>
---
configs/aristainetos2_defconfig | 2 +
include/configs/aristainetos2.h | 248 +++++++++++++++++++++++++-------
2 files changed, 195 insertions(+), 55 deletions(-)
diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig
index be5cec96fa..7278ec9d13 100644
--- a/configs/aristainetos2_defconfig
+++ b/configs/aristainetos2_defconfig
@@ -11,6 +11,8 @@ CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg"
CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run ari_boot"
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SUPPORT_RAW_INITRD=y
diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h
index 1999c5c616..fba26d0151 100644
--- a/include/configs/aristainetos2.h
+++ b/include/configs/aristainetos2.h
@@ -18,19 +18,6 @@
#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
- "board_type=aristainetos2_7 at 1\0" \
- "nor_bootdelay=-2\0" \
- "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
- "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \
- "-(rescue-system);gpmi-nand:-(ubi)\0" \
- "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0\0" \
- "ubiargs=setenv bootargs console=${console},${baudrate} " \
- "ubi.mtd=0,4096 root=ubi0:rootfs rootfstype=ubifs\0 " \
- "ubifs_load_fit=sf probe;ubi part ubi 4096;ubifsmount ubi:rootfs;" \
- "ubifsload ${fit_addr_r} /boot/system.itb; " \
- "imi ${fit_addr_r}\0 "
-
/* Framebuffer */
#define CONFIG_SYS_LDB_CLOCK 28341000
#define CONFIG_LG4573
@@ -49,49 +36,87 @@
#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
+#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
+ "dead=led led_red on\0" \
+ "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
+ "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \
+ "-(ubi-nor);gpmi-nand:-(ubi)\0" \
+ "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
+ "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
+ "mainboot=echo Booting from SD-card ...; " \
+ "run mainargs addmtd addmisc;" \
+ "if test -n ${addmiscM}; then run addmiscM;fi;" \
+ "if test -n ${addmiscC}; then run addmiscC;fi;" \
+ "if test -n ${addmiscD}; then run addmiscD;fi;" \
+ "run boot_board_type;" \
+ "bootm ${fit_addr_r}\0" \
+ "mainargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
+ "${fit_file}\0" \
+ "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
+ "${fit_addr_r} ${rescue_fit_file}\0"
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"disable_giga=yes\0" \
+ "usb_pgood_delay=2000\0" \
+ "nor_bootdelay=-2\0" \
"script=u-boot.scr\0" \
"fit_file=/boot/system.itb\0" \
+ "rescue_fit_file=/boot/rescue.itb\0" \
"loadaddr=0x12000000\0" \
"fit_addr_r=0x14000000\0" \
"uboot=/boot/u-boot.imx\0" \
"uboot_sz=d0000\0" \
- "rescue_sys_addr=f0000\0" \
- "rescue_sys_length=f10000\0" \
"panel=lb07wv8\0" \
"splashpos=m,m\0" \
"console=" CONSOLE_DEV "\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
- "default ${board_type}\0" \
+ "boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \
"get_env=mw ${loadaddr} 0 0x20000;" \
"mmc rescan;" \
- "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
"env import -t ${loadaddr}\0" \
- "default_env=mw ${loadaddr} 0 0x20000;" \
- "env export -t ${loadaddr} serial# ethaddr eth1addr " \
- "board_type panel;" \
+ "default_env=gpio set wp_spi_nor.gpio-hog;" \
+ "sf probe;" \
+ "sf protect unlock 0 0x1000000;" \
+ "mw ${loadaddr} 0 0x20000;" \
+ "env export -t ${loadaddr} serial# ethaddr " \
+ "board_type panel addmisc addmiscM addmiscC addmiscD;" \
"env default -a;" \
"env import -t ${loadaddr}\0" \
"loadbootscript=" \
- "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "${script};\0" \
+ "loadbootscriptUSB=" \
+ "ext4load usb 0 ${loadaddr} ${script};\0" \
+ "loadbootscriptUSBf=" \
+ "fatload usb 0 ${loadaddr} ${script};\0" \
+ "bootscriptUSB=echo Running bootscript from usb-stick ...; " \
+ "source\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"mmcpart=1\0" \
+ "mmcrescuepart=3\0" \
"mmcdev=0\0" \
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"mmcboot=echo Booting from mmc ...; " \
- "run mmcargs addmtd addmisc set_fit_default;" \
+ "run mmcargs addmtd addmisc;" \
+ "if test -n ${addmiscM}; then run addmiscM;fi;" \
+ "if test -n ${addmiscC}; then run addmiscC;fi;" \
+ "if test -n ${addmiscD}; then run addmiscD;fi;" \
+ "run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
- "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
+ "mmc_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
"${fit_file}\0" \
- "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "mmc_load_uboot=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
"${uboot}\0" \
+ "mmc_rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
+ "${fit_addr_r} ${rescue_fit_file}\0" \
"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
"setexpr uboot_maxsize ${uboot_sz} - 400;" \
@@ -100,50 +125,163 @@
"sf write ${loadaddr} 400 ${filesize};" \
"sf read ${cmp_buf} 400 ${uboot_sz};" \
"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
- "ubiboot=echo Booting from ubi ...; " \
- "run ubiargs addmtd addmisc set_fit_default;" \
- "bootm ${fit_addr_r}\0" \
"rescueargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/ram rw\0 " \
- "rescueboot=echo Booting rescue system from NOR ...; " \
- "run rescueargs addmtd addmisc set_fit_default;" \
+ "rescueboot=echo Booting rescue system ...; " \
+ "run rescueargs addmtd addmisc;" \
+ "if test -n ${rescue_reason}; then run rescue_reason;fi;" \
+ "if test -n ${addmiscM}; then run addmiscM;fi;" \
+ "if test -n ${addmiscC}; then run addmiscC;fi;" \
+ "if test -n ${addmiscD}; then run addmiscD;fi;" \
+ "run boot_board_type;" \
+ "if bootm ${fit_addr_r}; then ; " \
+ "else " \
+ "run dead; " \
+ "fi; \0" \
+ "r_reason_syserr=setenv rescue_reason setenv bootargs " \
+ "\\\\${bootargs} " \
+ "rescueReason=18\0 " \
+ "usb_load_fit=ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
+ "usb_load_fitf=fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
+ "usb_load_rescuefit=ext4load usb 0 ${fit_addr_r} " \
+ "${rescue_fit_file}\0" \
+ "usb_load_rescuefitf=fatload usb 0 ${fit_addr_r} " \
+ "${rescue_fit_file}\0" \
+ "usbroot=/dev/sda1 rootwait rw\0" \
+ "usbboot=echo Booting from usb-stick ...; " \
+ "run usbargs addmtd addmisc;" \
+ "if test -n ${addmiscM}; then run addmiscM;fi;" \
+ "if test -n ${addmiscC}; then run addmiscC;fi;" \
+ "if test -n ${addmiscD}; then run addmiscD;fi;" \
+ "run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
- "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
- "${rescue_sys_length}; imi ${fit_addr_r}\0" \
- CONFIG_EXTRA_ENV_BOARD_SETTINGS
-
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev};" \
- "if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
+ "usbargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${usbroot}\0" \
+ "mmc_rescue_boot=" \
+ "run r_reason_syserr;" \
+ "if run mmc_rescue_load_fit hab_check_file_fit; then " \
+ "run rescueboot; " \
"else " \
- "if run mmc_load_fit; then " \
- "run mmcboot; " \
+ "run dead; " \
+ "echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \
+ "fi;\0" \
+ "main_rescue_boot=" \
+ "if run main_load_fit hab_check_flash_fit; then " \
+ "if run mainboot; then ; " \
"else " \
- "if run ubifs_load_fit; then " \
- "run ubiboot; " \
+ "run r_reason_syserr;" \
+ "if run rescue_load_fit hab_check_file_fit;" \
+ "then run rescueboot; " \
"else " \
- "if run rescue_load_fit; then " \
- "run rescueboot; " \
- "else " \
- "echo RESCUE SYSTEM BOOT " \
- "FAILURE;" \
- "fi; " \
+ "run dead; " \
+ "echo RESCUE SYSTEM BOOT FAILURE;" \
"fi; " \
"fi; " \
- "fi; " \
- "else " \
- "if run ubifs_load_fit; then " \
- "run ubiboot; " \
"else " \
- "if run rescue_load_fit; then " \
+ "run r_reason_syserr;" \
+ "if run rescue_load_fit hab_check_file_fit; then " \
"run rescueboot; " \
"else " \
+ "run dead; " \
"echo RESCUE SYSTEM BOOT FAILURE;" \
"fi; " \
+ "fi;\0" \
+ "usb_mmc_rescue_boot=" \
+ "usb start;" \
+ "if usb storage; then " \
+ "if run loadbootscriptUSB " \
+ "hab_check_file_bootscript;" \
+ "then run bootscriptUSB; " \
+ "fi; " \
+ "if run loadbootscriptUSBf " \
+ "hab_check_file_bootscript;" \
+ "then run bootscriptUSB; " \
+ "fi; " \
+ "if run usb_load_fit hab_check_file_fit; then " \
+ "run usbboot; " \
+ "fi; " \
+ "if run usb_load_fitf hab_check_file_fit; then " \
+ "run usbboot; " \
+ "fi; "\
+ "if run usb_load_rescuefit hab_check_file_fit;" \
+ "then run r_reason_syserr rescueboot;" \
+ "fi; " \
+ "if run usb_load_rescuefitf hab_check_file_fit;" \
+ "then run r_reason_syserr rescueboot;" \
+ "fi; " \
+ "run mmc_rescue_boot;" \
+ "fi; "\
+ "run mmc_rescue_boot;\0" \
+ "rescue_xload_boot=" \
+ "run r_reason_syserr;" \
+ "if test ${bootmode} -ne 0 ; then " \
+ "mmc dev ${mmcdev};" \
+ "if mmc rescan; then " \
+ "if run mmc_rescue_load_fit " \
+ "hab_check_file_fit; then " \
+ "run rescueboot; " \
+ "else " \
+ "usb start;" \
+ "if usb storage; then " \
+ "if run usb_load_rescuefit " \
+ "hab_check_file_fit;"\
+ "then " \
+ "run rescueboot;" \
+ "fi; " \
+ "if run usb_load_rescuefitf "\
+ "hab_check_file_fit;"\
+ "then " \
+ "run rescueboot;" \
+ "fi; " \
+ "fi;" \
+ "fi;" \
+ "run dead; " \
+ "echo RESCUE SYSTEM ON SD OR " \
+ "USB BOOT FAILURE;" \
+ "else " \
+ "usb start;" \
+ "if usb storage; then " \
+ "if run usb_load_rescuefit " \
+ "hab_check_file_fit; then " \
+ "run rescueboot;" \
+ "fi; " \
+ "if run usb_load_rescuefitf " \
+ "hab_check_file_fit; then " \
+ "run rescueboot;" \
+ "fi; " \
+ "fi;" \
+ "run dead; " \
+ "echo RESCUE SYSTEM ON USB BOOT FAILURE;" \
+ "fi; " \
+ "else "\
+ "if run rescue_load_fit hab_check_file_fit; then " \
+ "run rescueboot; " \
+ "else " \
+ "run dead; " \
+ "echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \
+ "fi; " \
+ "fi;\0" \
+ "ari_boot=if test ${bootmode} -ne 0 ; then " \
+ "mmc dev ${mmcdev};" \
+ "if mmc rescan; then " \
+ "if run loadbootscript hab_check_file_bootscript;" \
+ "then run bootscript; " \
+ "fi; " \
+ "if run mmc_load_fit hab_check_file_fit; then " \
+ "if run mmcboot; then ; " \
+ "else " \
+ "run mmc_rescue_boot;" \
+ "fi; " \
+ "else " \
+ "run usb_mmc_rescue_boot;" \
+ "fi; " \
+ "else " \
+ "run usb_mmc_rescue_boot;" \
"fi; " \
- "fi"
+ "else "\
+ "run main_rescue_boot;" \
+ "fi; \0"\
+ CONFIG_EXTRA_ENV_BOARD_SETTINGS
#define CONFIG_ARP_TIMEOUT 200UL
--
2.21.0
next prev parent reply other threads:[~2019-12-01 10:23 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-01 10:23 [U-Boot] [PATCH v1 00/29] convert aristainetos board to DM Heiko Schocher
2019-12-01 10:23 ` [U-Boot] [PATCH v1 01/29] imx6: remove aristainetos board Heiko Schocher
2019-12-29 10:25 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 02/29] video: lg4573: convert to DM Heiko Schocher
2019-12-29 10:25 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 03/29] imx6: aristainetos: move defines to Kconfig Heiko Schocher
2019-12-29 10:27 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 04/29] imx6: aristainetos: remove 2b version Heiko Schocher
2019-12-29 10:25 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 05/29] imx6: aristainetos: disable gigabit support Heiko Schocher
2019-12-29 10:24 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 06/29] imx6: aristainetos: add device tree from linux Heiko Schocher
2019-12-29 10:28 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 07/29] imx6: aristainetos: add thumb build Heiko Schocher
2019-12-29 10:26 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 08/29] imx6: aristainetos: remove aristainetos-v2.c Heiko Schocher
2019-12-29 10:25 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 09/29] imx6: aristainetos: prepare dts for other board versions Heiko Schocher
2019-12-29 10:27 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 10/29] imx6: aristainetos: add DM_SERIAL support Heiko Schocher
2019-12-29 10:27 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 11/29] imx6: aristainetos: convert to DM_MMC Heiko Schocher
2019-12-29 10:27 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 12/29] imx6: aristainetos: convert gpio pins to DM and DTS Heiko Schocher
2019-12-29 10:28 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 13/29] imx6: aristainetos: convert to DM_USB Heiko Schocher
2019-12-29 10:27 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 14/29] imx6: aristainetos: convert CONFIG_DM_SPI Heiko Schocher
2019-12-29 10:27 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 15/29] imx6: aristainetos: enable DM_ETH Heiko Schocher
2019-12-29 10:26 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 16/29] imx6: aristainetos: add DM_VIDEO support Heiko Schocher
2019-12-29 10:28 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 17/29] imx6: aristainetos: add DM_I2C support Heiko Schocher
2019-12-29 10:24 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 18/29] imx6: aristainetos: convert to DM_PWM/DM_BACKLIGHT Heiko Schocher
2019-12-29 10:26 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 19/29] imx6: aristainetos: get rid of CONFIG_BOARDNAME Heiko Schocher
2019-12-29 10:26 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 20/29] imx6: aristainetos: add i2c eeprom support Heiko Schocher
2019-12-29 10:28 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 21/29] imx6: aristainetos: add AUTOBOOT_KEYED Heiko Schocher
2019-12-29 10:28 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 22/29] imx6: aristainetos: add version variable Heiko Schocher
2019-12-29 10:24 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 23/29] imx6: aristainetos: cleanup bootmode settings Heiko Schocher
2019-12-29 10:24 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 24/29] imx6: aristainetos: WDT DM conversion enable WDT reset Heiko Schocher
2019-12-29 10:27 ` sbabic at denx.de
2019-12-01 10:23 ` Heiko Schocher [this message]
2019-12-29 10:28 ` [U-Boot] [PATCH v1 25/29] imx6: aristainetos: cleanup default Environment sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 26/29] imx6: aristainetos: enable HAB boot Heiko Schocher
2019-12-29 10:25 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 27/29] imx6: aristainetos: readd aristainetos 2b board Heiko Schocher
2019-12-29 10:26 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 28/29] imx6: aristainetos: add aristainetos 2b csl Heiko Schocher
2019-12-29 10:29 ` sbabic at denx.de
2019-12-01 10:23 ` [U-Boot] [PATCH v1 29/29] imx6: aristainetos: add support for rev C board Heiko Schocher
2019-12-29 10:25 ` sbabic at denx.de
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191201102332.21397-26-hs@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox