[RESEND PATCH v1] colibri_imx6: fix broken fsl_esdhc_imx conversion

[Lukasz Majewski <lukma@denx.de>]

Hi Igor,

> Hi Stefano
> 
> On Fri, Dec 6, 2019 at 6:24 PM Igor Opaniuk <igor.opaniuk@gmail.com>
> wrote:
> >
> > From: Igor Opaniuk <igor.opaniuk@toradex.com>
> >
> > Not all CONFIG_FSL_ESDHC defines were properly replaced with
> > CONFIG_FSL_ESDHC_IMX, which broke U-boot proper booting on
> > Colibri iMX6 SoMs.
> >
> > U-boot is stuck after this message:
> > Commercial temperature grade DDR3 timings, 64bit bus width.
> > Trying to boot from MMC1
> >
> > Fixes: e37ac717d7("Convert to use fsl_esdhc_imx for i.MX platforms")
> > Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
> > ---
> >
> >  board/toradex/colibri_imx6/colibri_imx6.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/board/toradex/colibri_imx6/colibri_imx6.c
> > b/board/toradex/colibri_imx6/colibri_imx6.c index
> > ad40b589c1..44173dde1f 100644 ---
> > a/board/toradex/colibri_imx6/colibri_imx6.c +++
> > b/board/toradex/colibri_imx6/colibri_imx6.c @@ -83,7 +83,7 @@
> > iomux_v3_cfg_t const uart1_pads[] = {
> > MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), };
> >
> > -#if defined(CONFIG_FSL_ESDHC) && defined(CONFIG_SPL_BUILD)
> > +#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_SPL_BUILD)
> >  /* Colibri MMC */
> >  iomux_v3_cfg_t const usdhc1_pads[] = {
> >         MX6_PAD_SD1_CLK__SD1_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> > @@ -304,7 +304,7 @@ int board_ehci_hcd_init(int port)
> >  }
> >  #endif
> >
> > -#if defined(CONFIG_FSL_ESDHC) && defined(CONFIG_SPL_BUILD)
> > +#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_SPL_BUILD)
> >  /* use the following sequence: eMMC, MMC */
> >  struct fsl_esdhc_cfg usdhc_cfg[CONFIG_SYS_FSL_USDHC_NUM] = {
> >         {USDHC3_BASE_ADDR},
> > --
> > 2.17.1
> >  
> 
> I've just found the same fix [1] but from Ricardo with Awaiting
> upstream status in patchwork (I thought that he has fixed just Apalis
> iMX6), but seems the patch was
> lost somewhere, as I can not find it nor in u-boot-imx/next neither
> in u-boot-imx/master branches.

Thanks for providing the fix (at least for the Toradex boards)

And I do guess that more i.MX6 boards are affected ...

> 
> [1] https://patchwork.ozlabs.org/patch/1157059/
> 


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191206/34477b39/attachment.sig>