* [PATCH v2 1/3] wandboard: Fix the DM_PMIC conversion
@ 2019-12-10 0:20 Fabio Estevam
2019-12-10 0:20 ` [PATCH v2 2/3] wandboard: Propagate the error on PMIC function failure Fabio Estevam
2019-12-10 0:20 ` [PATCH v2 3/3] wandboard: Remove repeated PMIC string Fabio Estevam
0 siblings, 2 replies; 4+ messages in thread
From: Fabio Estevam @ 2019-12-10 0:20 UTC (permalink / raw)
To: u-boot
Commit ec837c82d709 ("imx6: wandboard: convert to DM_PMIC")
caused the following pmic_get() error:
CPU: Freescale i.MX6QP rev1.0 at 792 MHz
Reset cause: POR
DRAM: 2 GiB
PMIC: pmic_get() ret -19
...
and since the PMIC presence is used to determine the board D1 revision,
the following error is seen when booting a board rev D1:
WARNING: Could not determine dtb to use
and the kernel does not boot at all.
Fix the regression by passing "pfuze100 at 8" as the correct parameter
to the pmic_get() function in the DM case.
Fixes: ec837c82d709 ("imx6: wandboard: convert to DM_PMIC")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- Remove a double 'the' in the Subject
board/wandboard/wandboard.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
index 6c1e4ef27d..b2f961a7f0 100644
--- a/board/wandboard/wandboard.c
+++ b/board/wandboard/wandboard.c
@@ -363,7 +363,7 @@ int power_init_board(void)
puts("PMIC: ");
- ret = pmic_get("pfuze100", &dev);
+ ret = pmic_get("pfuze100 at 8", &dev);
if (ret < 0) {
printf("pmic_get() ret %d\n", ret);
return 0;
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v2 2/3] wandboard: Propagate the error on PMIC function failure
2019-12-10 0:20 [PATCH v2 1/3] wandboard: Fix the DM_PMIC conversion Fabio Estevam
@ 2019-12-10 0:20 ` Fabio Estevam
2019-12-10 9:31 ` Fabio Estevam
2019-12-10 0:20 ` [PATCH v2 3/3] wandboard: Remove repeated PMIC string Fabio Estevam
1 sibling, 1 reply; 4+ messages in thread
From: Fabio Estevam @ 2019-12-10 0:20 UTC (permalink / raw)
To: u-boot
When pmic_get() or pmic_reg_read() fail, the error code should
be propagated instead of returning success.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- None
board/wandboard/wandboard.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
index b2f961a7f0..7209cc8211 100644
--- a/board/wandboard/wandboard.c
+++ b/board/wandboard/wandboard.c
@@ -366,13 +366,13 @@ int power_init_board(void)
ret = pmic_get("pfuze100 at 8", &dev);
if (ret < 0) {
printf("pmic_get() ret %d\n", ret);
- return 0;
+ return ret;
}
reg = pmic_reg_read(dev, PFUZE100_DEVICEID);
if (reg < 0) {
printf("pmic_reg_read() ret %d\n", reg);
- return 0;
+ return ret;
}
printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
with_pmic = true;
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v2 2/3] wandboard: Propagate the error on PMIC function failure
2019-12-10 0:20 ` [PATCH v2 2/3] wandboard: Propagate the error on PMIC function failure Fabio Estevam
@ 2019-12-10 9:31 ` Fabio Estevam
0 siblings, 0 replies; 4+ messages in thread
From: Fabio Estevam @ 2019-12-10 9:31 UTC (permalink / raw)
To: u-boot
On Mon, Dec 9, 2019 at 9:20 PM Fabio Estevam <festevam@gmail.com> wrote:
> diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
> index b2f961a7f0..7209cc8211 100644
> --- a/board/wandboard/wandboard.c
> +++ b/board/wandboard/wandboard.c
> @@ -366,13 +366,13 @@ int power_init_board(void)
> ret = pmic_get("pfuze100 at 8", &dev);
> if (ret < 0) {
> printf("pmic_get() ret %d\n", ret);
> - return 0;
> + return ret;
Ops, we can't return error here because this causes issues on the
boards without PMIC.
I will resend the series without this patch.
> }
>
> reg = pmic_reg_read(dev, PFUZE100_DEVICEID);
> if (reg < 0) {
> printf("pmic_reg_read() ret %d\n", reg);
> - return 0;
> + return ret;
> }
> printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
> with_pmic = true;
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2 3/3] wandboard: Remove repeated PMIC string
2019-12-10 0:20 [PATCH v2 1/3] wandboard: Fix the DM_PMIC conversion Fabio Estevam
2019-12-10 0:20 ` [PATCH v2 2/3] wandboard: Propagate the error on PMIC function failure Fabio Estevam
@ 2019-12-10 0:20 ` Fabio Estevam
1 sibling, 0 replies; 4+ messages in thread
From: Fabio Estevam @ 2019-12-10 0:20 UTC (permalink / raw)
To: u-boot
After the conversion to DM_PMIC the following output is seen:
PMIC: PMIC: PFUZE100 ID=0x10
Remove the unnecessary PMIC string from the board file to
avoid the repetead string.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- Make it part of a patch series
board/wandboard/wandboard.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
index 7209cc8211..e386ad2cc1 100644
--- a/board/wandboard/wandboard.c
+++ b/board/wandboard/wandboard.c
@@ -361,8 +361,6 @@ int power_init_board(void)
struct udevice *dev;
int reg, ret;
- puts("PMIC: ");
-
ret = pmic_get("pfuze100 at 8", &dev);
if (ret < 0) {
printf("pmic_get() ret %d\n", ret);
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-12-10 9:31 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-12-10 0:20 [PATCH v2 1/3] wandboard: Fix the DM_PMIC conversion Fabio Estevam
2019-12-10 0:20 ` [PATCH v2 2/3] wandboard: Propagate the error on PMIC function failure Fabio Estevam
2019-12-10 9:31 ` Fabio Estevam
2019-12-10 0:20 ` [PATCH v2 3/3] wandboard: Remove repeated PMIC string Fabio Estevam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox