From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabio Estevam Date: Wed, 11 Dec 2019 10:49:30 -0300 Subject: [PATCH] imx8mq_evk: Update the required ATF branch Message-ID: <20191211134930.19348-1-festevam@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Following the README instructions leads to a non-booting U-Boot: U-Boot SPL 2020.01-rc3-00070-g9a0cbae22a (Nov 25 2019 - 13:08:24 -0300) PMIC: PFUZE100 ID=0x10 DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Trying to boot from MMC2 (It hangs here) Use the "imx_4.19.35_1.0.0" ATF branch instead, which fixes such problem and allow the boot to complete again. Suggested-by: Adam Ford Signed-off-by: Fabio Estevam --- board/freescale/imx8mq_evk/README | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README index c1d400bcf9..4f671b069c 100644 --- a/board/freescale/imx8mq_evk/README +++ b/board/freescale/imx8mq_evk/README @@ -11,7 +11,7 @@ Get and Build the ARM Trusted firmware ====================================== Note: srctree is U-Boot source directory Get ATF from: https://source.codeaurora.org/external/imx/imx-atf -branch: imx_4.14.62_1.0.0_beta +branch: imx_4.19.35_1.0.0 $ make PLAT=imx8mq bl31 $ cp build/imx8mq/release/bl31.bin $(srctree) -- 2.17.1