From: Fabio Estevam <festevam@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH] imx8m: ddr_init: Move ddr_init() messages to debug level
Date: Wed, 11 Dec 2019 17:37:09 -0300 [thread overview]
Message-ID: <20191211203709.26478-1-festevam@gmail.com> (raw)
Currently inside ddr_init() there is a mix of printf() and debug()
level messages.
Since this type of information is useful for debug purposes,
convert all of them to debug level for consistency.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
drivers/ddr/imx/imx8m/ddr_init.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/ddr/imx/imx8m/ddr_init.c b/drivers/ddr/imx/imx8m/ddr_init.c
index d6e915c9b9..21af66e4e7 100644
--- a/drivers/ddr/imx/imx8m/ddr_init.c
+++ b/drivers/ddr/imx/imx8m/ddr_init.c
@@ -24,7 +24,7 @@ void ddr_init(struct dram_timing_info *dram_timing)
{
unsigned int tmp, initial_drate, target_freq;
- printf("DDRINFO: start DRAM init\n");
+ debug("DDRINFO: start DRAM init\n");
/* Step1: Follow the power up procedure */
if (is_imx8mq()) {
@@ -109,7 +109,7 @@ void ddr_init(struct dram_timing_info *dram_timing)
tmp = reg32_read(DDRPHY_CalBusy(0));
} while ((tmp & 0x1));
- printf("DDRINFO:ddrphy calibration done\n");
+ debug("DDRINFO:ddrphy calibration done\n");
/* Step15: Set SWCTL.sw_done to 0 */
reg32_write(DDRC_SWCTL(0), 0x00000000);
@@ -161,7 +161,7 @@ void ddr_init(struct dram_timing_info *dram_timing)
/* enable port 0 */
reg32_write(DDRC_PCTRL_0(0), 0x00000001);
- printf("DDRINFO: ddrmix config done\n");
+ debug("DDRINFO: ddrmix config done\n");
/* save the dram timing config into memory */
dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE);
--
2.17.1
next reply other threads:[~2019-12-11 20:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-11 20:37 Fabio Estevam [this message]
2019-12-12 1:21 ` [PATCH] imx8m: ddr_init: Move ddr_init() messages to debug level Peng Fan
2019-12-28 10:48 ` sbabic at denx.de
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211203709.26478-1-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox