* [PATCH] mx51evk: Fix U-Boot corruption after saving the environment
@ 2019-12-19 16:52 Fabio Estevam
2019-12-28 10:48 ` sbabic at denx.de
0 siblings, 1 reply; 2+ messages in thread
From: Fabio Estevam @ 2019-12-19 16:52 UTC (permalink / raw)
To: u-boot
U-Boot binary has grown in such a way that it goes beyond the reserved
area for the environment variables.
Running "saveenv" followed by a "reset" causes U-Boot to hang because
of this overlap.
Fix this problem by increasing the CONFIG_ENV_OFFSET size.
Also, in order to prevent this same problem to happen in the future,
use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time.
CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare
CONFIG_ENV_OFFSET with its direct value instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Tom,
I cannot use the thumb trick here because of the erratum.
configs/mx51evk_defconfig | 2 +-
include/configs/mx51evk.h | 13 +++++++++++++
2 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/configs/mx51evk_defconfig b/configs/mx51evk_defconfig
index 1505459259..a2af8ae7b2 100644
--- a/configs/mx51evk_defconfig
+++ b/configs/mx51evk_defconfig
@@ -3,7 +3,7 @@ CONFIG_ARCH_MX5=y
CONFIG_SYS_TEXT_BASE=0x97800000
CONFIG_TARGET_MX51EVK=y
CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x60000
+CONFIG_ENV_OFFSET=0xC0000
CONFIG_NR_DRAM_BANKS=1
# CONFIG_CMD_BMODE is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx51evk/imximage.cfg"
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 71ff789381..10aa1bcd87 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -182,6 +182,19 @@
/*-----------------------------------------------------------------------
* environment organization
*/
+
+/*
+ * Environment starts at CONFIG_ENV_OFFSET=0xC0000 = 768k = 768 * 1024 = 786432
+ *
+ * Detect overlap between U-Boot image and environment area in build-time
+ *
+ * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.imx offset
+ * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408
+ *
+ * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
+ * write the direct value here
+ */
+#define CONFIG_BOARD_SIZE_LIMIT 785408
#define CONFIG_SYS_MMC_ENV_DEV 0
#endif
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH] mx51evk: Fix U-Boot corruption after saving the environment
2019-12-19 16:52 [PATCH] mx51evk: Fix U-Boot corruption after saving the environment Fabio Estevam
@ 2019-12-28 10:48 ` sbabic at denx.de
0 siblings, 0 replies; 2+ messages in thread
From: sbabic at denx.de @ 2019-12-28 10:48 UTC (permalink / raw)
To: u-boot
> U-Boot binary has grown in such a way that it goes beyond the reserved
> area for the environment variables.
> Running "saveenv" followed by a "reset" causes U-Boot to hang because
> of this overlap.
> Fix this problem by increasing the CONFIG_ENV_OFFSET size.
> Also, in order to prevent this same problem to happen in the future,
> use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time.
> CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare
> CONFIG_ENV_OFFSET with its direct value instead.
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-12-28 10:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-12-19 16:52 [PATCH] mx51evk: Fix U-Boot corruption after saving the environment Fabio Estevam
2019-12-28 10:48 ` sbabic at denx.de
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox