From: Fabio Estevam <festevam@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH 1/2] pfuze: Fix the pmic_get() parameter in the DM case
Date: Thu, 19 Dec 2019 14:59:41 -0300 [thread overview]
Message-ID: <20191219175942.3915-1-festevam@gmail.com> (raw)
Currently the following hang is observed when booting a imx6sx-sdb
board:
U-Boot 2020.01-rc5-00004-g643366bcd5 (Dec 19 2019 - 14:56:23 -0300)
CPU: Freescale i.MX6SX rev1.0 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 32C
Reset cause: POR
Model: Freescale i.MX6 SoloX SDB RevB Board
Board: MX6SX SABRE SDB revA
DRAM: 1 GiB
initcall sequence bffd8514 failed at call 87804cc0 (err=-19)
### ERROR ### Please RESET the board ###
When pmic_get() is used with DM the first parameter must be
the complete node name plus the unit address.
Fix the pmic_get() parameter to fix the boot regression.
Tested on a imx6sx-sdb and imx6q-sabresd boards.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
board/freescale/common/pfuze.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/common/pfuze.c b/board/freescale/common/pfuze.c
index 03ebe4e7b5..6dca22960b 100644
--- a/board/freescale/common/pfuze.c
+++ b/board/freescale/common/pfuze.c
@@ -136,7 +136,7 @@ struct udevice *pfuze_common_init(void)
int ret;
unsigned int reg, dev_id, rev_id;
- ret = pmic_get("pfuze100", &dev);
+ ret = pmic_get("pfuze100 at 8", &dev);
if (ret == -ENODEV)
return NULL;
--
2.17.1
next reply other threads:[~2019-12-19 17:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-19 17:59 Fabio Estevam [this message]
2019-12-19 17:59 ` [PATCH 2/2] mx6sxsabresd: Adjust the mmcdev after DM conversion Fabio Estevam
2019-12-28 10:48 ` sbabic at denx.de
2019-12-20 14:30 ` [PATCH 1/2] pfuze: Fix the pmic_get() parameter in the DM case Igor Opaniuk
2019-12-20 18:00 ` Fabio Estevam
2019-12-28 10:48 ` sbabic at denx.de
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191219175942.3915-1-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox