From mboxrd@z Thu Jan  1 00:00:00 1970
From: sbabic at denx.de <sbabic@denx.de>
Date: Sat, 28 Dec 2019 11:48:34 +0100 (CET)
Subject: [PATCH] imx8mq_evk: Update the required ATF branch
In-Reply-To: <20191211134930.19348-1-festevam@gmail.com>
Message-ID: <20191228104834.EE18181701@phobos.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> Following the README instructions leads to a non-booting
> U-Boot:
> U-Boot SPL 2020.01-rc3-00070-g9a0cbae22a (Nov 25 2019 - 13:08:24 -0300)
> PMIC:  PFUZE100 ID=0x10
> DDRINFO: start DRAM init
> DDRINFO:ddrphy calibration done
> DDRINFO: ddrmix config done
> Normal Boot
> Trying to boot from MMC2
> (It hangs here)
> Use the "imx_4.19.35_1.0.0" ATF branch instead, which
> fixes such problem and allow the boot to complete again.
> Suggested-by: Adam Ford <aford173@gmail.com>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> Acked-by: Peng Fan <peng.fan@nxp.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================