From mboxrd@z Thu Jan  1 00:00:00 1970
From: sbabic at denx.de <sbabic@denx.de>
Date: Sat, 28 Dec 2019 11:48:46 +0100 (CET)
Subject: [PATCH 1/2] pfuze: Fix the pmic_get() parameter in the DM case
In-Reply-To: <20191219175942.3915-1-festevam@gmail.com>
Message-ID: <20191228104846.1CC2C8170B@phobos.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> Currently the following hang is observed when booting a imx6sx-sdb
> board:
> U-Boot 2020.01-rc5-00004-g643366bcd5 (Dec 19 2019 - 14:56:23 -0300)
> CPU:   Freescale i.MX6SX rev1.0 996 MHz (running at 792 MHz)
> CPU:   Extended Commercial temperature grade (-20C to 105C) at 32C
> Reset cause: POR
> Model: Freescale i.MX6 SoloX SDB RevB Board
> Board: MX6SX SABRE SDB revA
> DRAM:  1 GiB
> initcall sequence bffd8514 failed at call 87804cc0 (err=-19)
> ### ERROR ### Please RESET the board ###
> When pmic_get() is used with DM the first parameter must be
> the complete node name plus the unit address.
> Fix the pmic_get() parameter to fix the boot regression.
> Tested on a imx6sx-sdb and imx6q-sabresd boards.
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================