From mboxrd@z Thu Jan 1 00:00:00 1970 From: sbabic at denx.de Date: Sat, 28 Dec 2019 11:48:54 +0100 (CET) Subject: [PATCH v3 1/2] wandboard: Fix the DM_PMIC conversion In-Reply-To: <20191210093300.31692-1-festevam@gmail.com> Message-ID: <20191228104854.08E0281718@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > Commit ec837c82d709 ("imx6: wandboard: convert to DM_PMIC") > caused the following pmic_get() error: > > CPU: Freescale i.MX6QP rev1.0 at 792 MHz > Reset cause: POR > DRAM: 2 GiB > PMIC: pmic_get() ret -19 > ... > and since the PMIC presence is used to determine the board D1 revision, > the following error is seen when booting a board rev D1: > > WARNING: Could not determine dtb to use > and the kernel does not boot at all. > Fix the regression by passing "pfuze100 at 8" as the correct parameter > to the pmic_get() function in the DM case. > Fixes: ec837c82d709 ("imx6: wandboard: convert to DM_PMIC") > Signed-off-by: Fabio Estevam Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================