[PATCH v4 4/8] rockchip: Add common reset cause

[Jagan Teki <jagan@amarulasolutions.com>]

Add cpu reset cause in common cpu-info file.

This would help to print the reset cause for
various resets.

Right now it support rk3288, rk3399. rest of rockchip
platforms doesn't have reset cause support ye but this
code is more feasible to extend the same.

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/include/asm/arch-rockchip/cru.h      | 12 +++++
 .../include/asm/arch-rockchip/cru_rk3288.h    | 14 +-----
 arch/arm/mach-rockchip/cpu-info.c             | 49 +++++++++++++++++++
 arch/arm/mach-rockchip/rk3288/rk3288.c        | 39 ---------------
 4 files changed, 62 insertions(+), 52 deletions(-)

diff --git a/arch/arm/include/asm/arch-rockchip/cru.h b/arch/arm/include/asm/arch-rockchip/cru.h
index 475d772fb6..5cf2aec11a 100644
--- a/arch/arm/include/asm/arch-rockchip/cru.h
+++ b/arch/arm/include/asm/arch-rockchip/cru.h
@@ -13,6 +13,18 @@
 # include <asm/arch-rockchip/cru_rk3399.h>
 #endif
 
+/* CRU_GLB_RST_ST */
+enum {
+	GLB_POR_RST,
+	FST_GLB_RST_ST		= BIT(0),
+	SND_GLB_RST_ST		= BIT(1),
+	FST_GLB_TSADC_RST_ST	= BIT(2),
+	SND_GLB_TSADC_RST_ST	= BIT(3),
+	FST_GLB_WDT_RST_ST	= BIT(4),
+	SND_GLB_WDT_RST_ST	= BIT(5),
+	GLB_RST_ST_MASK		= GENMASK(5, 0),
+};
+
 #define MHz		1000000
 
 #endif /* _ROCKCHIP_CLOCK_H */
diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3288.h b/arch/arm/include/asm/arch-rockchip/cru_rk3288.h
index 7aa6efe46c..412b73e55f 100644
--- a/arch/arm/include/asm/arch-rockchip/cru_rk3288.h
+++ b/arch/arm/include/asm/arch-rockchip/cru_rk3288.h
@@ -51,7 +51,7 @@ struct rockchip_cru {
 	u32 cru_glb_cnt_th;
 	u32 cru_glb_rst_con;
 	u32 reserved3;
-	u32 cru_glb_rst_st;
+	u32 glb_rst_st;
 	u32 reserved4;
 	u32 cru_sdmmc_con[2];
 	u32 cru_sdio0_con[2];
@@ -227,16 +227,4 @@ enum {
 	CLKF_MASK		= 0x1fff << CLKF_SHIFT,
 };
 
-/* CRU_GLB_RST_ST */
-enum {
-	GLB_POR_RST,
-	FST_GLB_RST_ST		= BIT(0),
-	SND_GLB_RST_ST		= BIT(1),
-	FST_GLB_TSADC_RST_ST	= BIT(2),
-	SND_GLB_TSADC_RST_ST	= BIT(3),
-	FST_GLB_WDT_RST_ST	= BIT(4),
-	SND_GLB_WDT_RST_ST	= BIT(5),
-	GLB_RST_ST_MASK		= GENMASK(5, 0),
-};
-
 #endif
diff --git a/arch/arm/mach-rockchip/cpu-info.c b/arch/arm/mach-rockchip/cpu-info.c
index 9bccbd4f68..4b0e99299a 100644
--- a/arch/arm/mach-rockchip/cpu-info.c
+++ b/arch/arm/mach-rockchip/cpu-info.c
@@ -5,10 +5,59 @@
  */
 
 #include <common.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <linux/err.h>
+
+static char *get_reset_cause(void)
+{
+	struct rockchip_cru *cru = rockchip_get_cru();
+	char *cause = NULL;
+
+	if (IS_ERR(cru))
+		return cause;
+
+	switch (cru->glb_rst_st) {
+	case GLB_POR_RST:
+		cause = "POR";
+		break;
+	case FST_GLB_RST_ST:
+	case SND_GLB_RST_ST:
+		cause = "RST";
+		break;
+	case FST_GLB_TSADC_RST_ST:
+	case SND_GLB_TSADC_RST_ST:
+		cause = "THERMAL";
+		break;
+	case FST_GLB_WDT_RST_ST:
+	case SND_GLB_WDT_RST_ST:
+		cause = "WDOG";
+		break;
+	default:
+		cause = "unknown reset";
+	}
+
+	/**
+	 * reset_reason env is used by rk3288, due to special use case
+	 * to figure it the boot behavior. so keep this as it is.
+	 */
+	env_set("reset_reason", cause);
+
+	/*
+	 * Clear glb_rst_st, so we can determine the last reset cause
+	 * for following resets.
+	 */
+	rk_clrreg(&cru->glb_rst_st, GLB_RST_ST_MASK);
+
+	return cause;
+}
 
 int print_cpuinfo(void)
 {
 	printf("SoC: Rockchip %s\n", CONFIG_SYS_SOC);
+	printf("Reset cause: %s\n", get_reset_cause());
 
 	/* TODO print operating temparature and clock */
 
diff --git a/arch/arm/mach-rockchip/rk3288/rk3288.c b/arch/arm/mach-rockchip/rk3288/rk3288.c
index 47ee5d440b..18ea7f35fb 100644
--- a/arch/arm/mach-rockchip/rk3288/rk3288.c
+++ b/arch/arm/mach-rockchip/rk3288/rk3288.c
@@ -102,43 +102,6 @@ void board_debug_uart_init(void)
 }
 #endif
 
-static void rk3288_detect_reset_reason(void)
-{
-	struct rockchip_cru *cru = rockchip_get_cru();
-	const char *reason;
-
-	if (IS_ERR(cru))
-		return;
-
-	switch (cru->cru_glb_rst_st) {
-	case GLB_POR_RST:
-		reason = "POR";
-		break;
-	case FST_GLB_RST_ST:
-	case SND_GLB_RST_ST:
-		reason = "RST";
-		break;
-	case FST_GLB_TSADC_RST_ST:
-	case SND_GLB_TSADC_RST_ST:
-		reason = "THERMAL";
-		break;
-	case FST_GLB_WDT_RST_ST:
-	case SND_GLB_WDT_RST_ST:
-		reason = "WDOG";
-		break;
-	default:
-		reason = "unknown reset";
-	}
-
-	env_set("reset_reason", reason);
-
-	/*
-	 * Clear cru_glb_rst_st, so we can determine the last reset cause
-	 * for following resets.
-	 */
-	rk_clrreg(&cru->cru_glb_rst_st, GLB_RST_ST_MASK);
-}
-
 __weak int rk3288_board_late_init(void)
 {
 	return 0;
@@ -146,8 +109,6 @@ __weak int rk3288_board_late_init(void)
 
 int rk_board_late_init(void)
 {
-	rk3288_detect_reset_reason();
-
 	return rk3288_board_late_init();
 }
 
-- 
2.18.0.321.gffc6fa0e3