From: Chen-Yu Tsai <wens@kernel.org>
To: u-boot@lists.denx.de
Subject: [PATCH 0/3] sunxi: Sync H3/H5 DT and add ALL-H3-IT and ALL-H5-CC
Date: Sun, 12 Jan 2020 23:36:12 +0800 [thread overview]
Message-ID: <20200112153615.9532-1-wens@kernel.org> (raw)
From: Chen-Yu Tsai <wens@csie.org>
Hi everyone,
This patch series syncs up the device tree files and header files for
Allwinner H3/H5 SoCs and related boards to linux-next-20200108, and
then adds support for Libre Computer ALL-H3-IT H5 and ALL-H5-CC H5
boards.
Patch 1 syncs up the device tree files and related device tree binding
header files for the Allwinner H3 and H5 SoCs, and boards using these
chips. These were compile tested.
Patch 2 adds a defconfig and MAINTAINERS entry for the ALL-H3-IT's H5
variant. Other variants will be added as they are made available.
Patch 3 adds a defconfig and MAINTAINERS entry for the ALL-H5-CC's H5
variant. Other variants will be added as they are made available.
Please have a look.
Regards
ChenYu
Chen-Yu Tsai (3):
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of
next-20200108
sunxi: Add Libre Computer ALL-H3-IT H5 board
sunxi: Add Libre Computer ALL-H5-CC H5 board
arch/arm/dts/Makefile | 9 +-
.../dts/sun50i-h5-bananapi-m2-plus-v1.2.dts | 11 ++
.../sun50i-h5-emlid-neutis-n5-devboard.dts | 137 ++-----------
arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi | 95 +--------
.../arm/dts/sun50i-h5-libretech-all-h3-cc.dts | 10 +-
.../arm/dts/sun50i-h5-libretech-all-h3-it.dts | 11 ++
.../arm/dts/sun50i-h5-libretech-all-h5-cc.dts | 61 ++++++
arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts | 53 +----
arch/arm/dts/sun50i-h5-nanopi-neo2.dts | 45 +----
arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 47 +----
arch/arm/dts/sun50i-h5-orangepi-prime.dts | 52 +----
arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts | 11 +-
.../arm/dts/sun50i-h5-orangepi-zero-plus2.dts | 46 +----
arch/arm/dts/sun50i-h5.dtsi | 186 +++++++++++++-----
.../dts/sun8i-h2-plus-bananapi-m2-zero.dts | 40 +++-
arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts | 2 -
arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts | 22 ++-
.../dts/sun8i-h3-bananapi-m2-plus-v1.2.dts | 13 ++
arch/arm/dts/sun8i-h3-beelink-x2.dts | 11 +-
.../sun8i-h3-emlid-neutis-n5h3-devboard.dts | 72 +++++++
arch/arm/dts/sun8i-h3-emlid-neutis-n5h3.dtsi | 11 ++
arch/arm/dts/sun8i-h3-mapleboard-mp130.dts | 152 ++++++++++++++
arch/arm/dts/sun8i-h3-nanopi-duo2.dts | 173 ++++++++++++++++
arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts | 28 ++-
arch/arm/dts/sun8i-h3-nanopi-m1.dts | 2 +-
arch/arm/dts/sun8i-h3-nanopi-neo-air.dts | 2 +-
arch/arm/dts/sun8i-h3-nanopi.dtsi | 25 +--
arch/arm/dts/sun8i-h3-orangepi-2.dts | 34 +---
arch/arm/dts/sun8i-h3-orangepi-lite.dts | 27 +--
arch/arm/dts/sun8i-h3-orangepi-one.dts | 28 +--
arch/arm/dts/sun8i-h3-orangepi-pc.dts | 27 +--
arch/arm/dts/sun8i-h3-orangepi-plus.dts | 23 ++-
arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts | 2 +-
arch/arm/dts/sun8i-h3-rervision-dvk.dts | 114 +++++++++++
arch/arm/dts/sun8i-h3.dtsi | 86 +++++++-
arch/arm/dts/sunxi-bananapi-m2-plus-v1.2.dtsi | 30 +++
arch/arm/dts/sunxi-bananapi-m2-plus.dtsi | 7 +-
arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi | 170 ++++++++++++++++
arch/arm/dts/sunxi-h3-h5.dtsi | 137 ++++++++-----
arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi | 65 +++++-
arch/arm/dts/sunxi-libretech-all-h3-it.dtsi | 180 +++++++++++++++++
board/sunxi/MAINTAINERS | 10 +
configs/libretech_all_h3_it_h5_defconfig | 22 +++
configs/libretech_all_h5_cc_h5_defconfig | 23 +++
include/dt-bindings/clock/sun8i-h3-ccu.h | 11 +-
include/dt-bindings/reset/sun8i-h3-ccu.h | 5 +-
46 files changed, 1605 insertions(+), 723 deletions(-)
create mode 100644 arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts
create mode 100644 arch/arm/dts/sun50i-h5-libretech-all-h3-it.dts
create mode 100644 arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
create mode 100644 arch/arm/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts
create mode 100644 arch/arm/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts
create mode 100644 arch/arm/dts/sun8i-h3-emlid-neutis-n5h3.dtsi
create mode 100644 arch/arm/dts/sun8i-h3-mapleboard-mp130.dts
create mode 100644 arch/arm/dts/sun8i-h3-nanopi-duo2.dts
create mode 100644 arch/arm/dts/sun8i-h3-rervision-dvk.dts
create mode 100644 arch/arm/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
create mode 100644 arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi
create mode 100644 arch/arm/dts/sunxi-libretech-all-h3-it.dtsi
create mode 100644 configs/libretech_all_h3_it_h5_defconfig
create mode 100644 configs/libretech_all_h5_cc_h5_defconfig
--
2.24.1
next reply other threads:[~2020-01-12 15:36 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-12 15:36 Chen-Yu Tsai [this message]
2020-01-12 15:36 ` [PATCH 1/3] sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108 Chen-Yu Tsai
2020-01-21 7:32 ` Jagan Teki
2020-01-12 15:36 ` [PATCH 2/3] sunxi: Add Libre Computer ALL-H3-IT H5 board Chen-Yu Tsai
2020-01-21 7:29 ` Jagan Teki
2020-01-21 7:41 ` Chen-Yu Tsai
2020-01-24 6:23 ` Jagan Teki
2020-01-24 8:32 ` Chen-Yu Tsai
2020-02-05 4:01 ` Chen-Yu Tsai
2020-01-24 17:45 ` Jagan Teki
2020-01-12 15:36 ` [PATCH 3/3] sunxi: Add Libre Computer ALL-H5-CC " Chen-Yu Tsai
2020-01-24 17:45 ` Jagan Teki
2020-01-20 2:35 ` [PATCH 0/3] sunxi: Sync H3/H5 DT and add ALL-H3-IT and ALL-H5-CC Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200112153615.9532-1-wens@kernel.org \
--to=wens@kernel.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox