[PATCH] arm: exynos: Use proper PMIC device name

Anand Moon
2020-01-15T15:31:40Z

Hi Marek,

On Wed, 15 Jan 2020 at 20:47, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
>
> Since commit 4213609cc7 ("drivers: core: use strcmp when find device by
> name") one has to provide full name to get requested object. Fix the code
> used to detect enable power regulators on Odroid boards to use proper PMIC
> device device name then.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
> board/samsung/common/exynos5-dt.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c
> index 87eb381345..c5e77480f5 100644
> --- a/board/samsung/common/exynos5-dt.c
> +++ b/board/samsung/common/exynos5-dt.c
> @@ -64,7 +64,7 @@ int exynos_power_init(void)
> int ret;
>
> #ifdef CONFIG_PMIC_S2MPS11
> - ret = pmic_get("s2mps11_pmic", &dev);
> + ret = pmic_get("s2mps11_pmic at 66", &dev);
> #else
> ret = pmic_get("max77686", &dev);
> if (!ret) {
> --
> 2.17.1
>
Please add my
Reviewed-by: Anand Moon <linux.amoon@gmail.com>

I was going to send similar patch,
Their is another place where this chances needed to avoid following failed

adc at 12D10000: Can't update Vdd. Error: -19Type: hc1

# board/samsung/common/exynos5-dt-types.c

-Anand