From: Jorge Ramirez-Ortiz, Foundries <jorge@foundries.io>
To: u-boot@lists.denx.de
Subject: [PATCH] arm: dts: imx7ulp-evk: remove mux value from pad configuration
Date: Thu, 16 Jan 2020 08:40:11 +0100 [thread overview]
Message-ID: <20200116074011.GA4822@trex> (raw)
In-Reply-To: <AM0PR04MB44815328998F40BCCA76893588360@AM0PR04MB4481.eurprd04.prod.outlook.com>
On 16/01/20 02:22:35, Peng Fan wrote:
> > Subject: [PATCH] arm: dts: imx7ulp-evk: remove mux value from pad
> > configuration
> >
> > The mux mode is embedded in the PAD definition and therefore there is no
> > need to repeat it in the PAD configuration value (more over since this
> > information will be masked out when the configuration value is applied).
>
> Has this been accepted by Shawn?
added to DL now
>
> Thanks,
> Peng.
>
> >
> > Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
> > ---
> > arch/arm/dts/imx7ulp-evk.dts | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/dts/imx7ulp-evk.dts b/arch/arm/dts/imx7ulp-evk.dts
> > index 08a682f314..8f6a935e24 100644
> > --- a/arch/arm/dts/imx7ulp-evk.dts
> > +++ b/arch/arm/dts/imx7ulp-evk.dts
> > @@ -156,7 +156,7 @@
> >
> > pinctrl_backlight: backlight_grp {
> > fsl,pins = <
> > - IMX7ULP_PAD_PTF2__PTF2 0x20100
> > + IMX7ULP_PAD_PTF2__PTF2 0x20000
> > >;
> > };
> >
> > --
> > 2.17.1
>
next prev parent reply other threads:[~2020-01-16 7:40 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-15 17:50 [PATCH] arm: dts: imx7ulp-evk: remove mux value from pad configuration Jorge Ramirez-Ortiz
2020-01-16 2:22 ` Peng Fan
2020-01-16 7:40 ` Jorge [this message]
2020-01-17 11:51 ` Fabio Estevam
2020-01-19 18:53 ` Jorge
2020-01-17 11:50 ` Fabio Estevam
2020-01-20 20:18 ` sbabic at denx.de
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200116074011.GA4822@trex \
--to=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox