[PATCH] mx7ulp: soc: s_init should only be executed once

[Jorge Ramirez-Ortiz, Foundries <jorge@foundries.io>]

On 17/01/20 13:08:44, Jorge Ramirez-Ortiz, Gmail wrote:
> On 17/01/20 08:53:03, Fabio Estevam wrote:
> > Hi Jorge,
> > 
> > On Fri, Jan 17, 2020 at 6:50 AM Jorge Ramirez-Ortiz <jorge@foundries.io> wrote:
> > >
> > > On SPL enabled systems, the current s_init code (wdog, clock and ldo
> > > init) is executed twice (by SPL and u-boot). This is not necessary and
> > > might lead to boot issues (ie, starting PMC1 when it is already running).
> > >
> > > Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
> > 
> > The target I use to test LDO-enabled mode does not use SPL, so that's
> > why I did not notice the problem.
> > 
> > Thanks for the fix:
> 
> Hi Favio,
> 
> sorry I forgot to mention: this does not fix the issue I see when executing the LDO init code - that still locks when run from SPL or U-Boot.
> This commit is just because I noticed that s_init was being called twice (for SPL and U-Boot)  and I dont think it makes sense.
> 
> > 
> > Reviewed-by: Fabio Estevam <festevam@gmail.com>

hi Favio/all

plese could you confirm if this patch will be merged (just so we dont have to carry it separately in our product branches)

thanks!
Jorge