[PATCH v1] imx: set CONFIG_FEC_MXC_PHYADDR to -1

[Oliver Graute <oliver.graute@gmail.com>]

On 03/02/20, Fabio Estevam wrote:
> On Mon, Feb 3, 2020 at 12:33 PM Oliver Graute <oliver.graute@gmail.com> wrote:
> 
> > Yes, but phy addr 0 is currently not working that way for me. So I tried
> > to solve it by autodetecting the phy. Please see this thread:
> 
> Looking at your other patch, it looks like you have:
> 
> +               ethphy0: ethernet-phy at 0 {
> +                       compatible = "ethernet-phy-ieee802.3-c22";
> +                       reg = <6>;
> +                       at803x,eee-disabled;
> +                       at803x,vddio-1p8v;
> +               };
> 
> which shows a mismatch between the @0 and the reg field. Building with
> W=1 should have warned you about that.
> 
> So it seems you need to fix your dts.

thx, I'll fix that on the congatec cgtqmx8 board dts file. The phy issue here
was on the advantech imx8qm-rom7720 board.

Best regards,

Oliver