[PATCH] regulator: fix: Move code to enable gpio regulator to pre_probe from ofdata_to_platdata

[Lukasz Majewski <lukma@denx.de>]

Dear Tom

> The commit e8e9715df2d4 ("regulator: fixed: Modify enable-active-high
> behavior") fixed the regulator driver behavior when
> 'enable-active-high' is defined. Unfortunately, this patch used
> dm_regulator_platdata()'s "boot_on" member to set GPIOD_IS_OUT_ACTIVE
> flag and enable the regulator.
> 
> The issue here is that regulator_common_ofdata_to_platdata() is called
> _before_ regulator_pre_probe() function in which the
> 'regulator-boot-on' property is asserted.
> 
> As a result the GPIOD_IS_OUT_ACTIVE flag is not set and
> gpio_request_by_name() called in the former function is not enabling
> the regulator. This is problematic for e.g. i.MX ethernet driver,
> which then tries to perform initialization without power (and fails).
> 
> The solution here is to explicitly enable regulator in
> regulator_pre_probe() callback only when 'regulator-boot-on' property
> is present in device tree. The GPIOD_IS_OUT_ACTIVE flag is not set at
> all, but relevant gpio is requested.
> 
> Signed-off-by: Lukasz Majewski <lukma@denx.de>

Tom, could you pull this fix? (I would prefer to avoid pulling my own
fixes).

It has been already tested-by Patrice.

Thanks in advance.

> ---
> 
>  drivers/power/regulator/regulator-uclass.c | 3 +++
>  drivers/power/regulator/regulator_common.c | 5 -----
>  2 files changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/power/regulator/regulator-uclass.c
> b/drivers/power/regulator/regulator-uclass.c index
> 90961de95c..c9d26344d7 100644 ---
> a/drivers/power/regulator/regulator-uclass.c +++
> b/drivers/power/regulator/regulator-uclass.c @@ -464,6 +464,9 @@
> static int regulator_pre_probe(struct udevice *dev) (uc_pdata->min_uA
> == uc_pdata->max_uA)) uc_pdata->flags |= REGULATOR_FLAG_AUTOSET_UA;
>  
> +	if (uc_pdata->boot_on)
> +		regulator_set_enable(dev, uc_pdata->boot_on);
> +
>  	return 0;
>  }
>  
> diff --git a/drivers/power/regulator/regulator_common.c
> b/drivers/power/regulator/regulator_common.c index
> 939efb2c0d..33b73b7c2f 100644 ---
> a/drivers/power/regulator/regulator_common.c +++
> b/drivers/power/regulator/regulator_common.c @@ -12,16 +12,11 @@ int
> regulator_common_ofdata_to_platdata(struct udevice *dev, struct
> regulator_common_platdata *dev_pdata, const char *enable_gpio_name) {
>  	struct gpio_desc *gpio;
> -	struct dm_regulator_uclass_platdata *uc_pdata;
>  	int flags = GPIOD_IS_OUT;
>  	int ret;
>  
> -	uc_pdata = dev_get_uclass_platdata(dev);
> -
>  	if (!dev_read_bool(dev, "enable-active-high"))
>  		flags |= GPIOD_ACTIVE_LOW;
> -	if (uc_pdata->boot_on)
> -		flags |= GPIOD_IS_OUT_ACTIVE;
>  
>  	/* Get optional enable GPIO desc */
>  	gpio = &dev_pdata->gpio;




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200210/61406bc7/attachment.sig>