* [PATCH v5 1/6] doc: board: toradex: add colibri_imx7.rst
2020-02-12 15:14 [PATCH v5 0/6] doc: board: toradex reST documentation Igor Opaniuk
@ 2020-02-12 15:14 ` Igor Opaniuk
2020-02-12 15:45 ` Oleksandr Suvorov
2020-02-20 13:26 ` Bin Meng
2020-02-12 15:14 ` [PATCH v5 2/6] doc: board: verdin-imx8mm: convert readme to reST Igor Opaniuk
` (5 subsequent siblings)
6 siblings, 2 replies; 19+ messages in thread
From: Igor Opaniuk @ 2020-02-12 15:14 UTC (permalink / raw)
To: u-boot
From: Igor Opaniuk <igor.opaniuk@toradex.com>
- add initial index for toradex boards reST documentation
- add initial colibri_imx7.rst doc file which provides all needed
information for obtaining a workable image ready for flashing
for both eMMC/NAND versions of Colibri iMX7.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---
doc/board/index.rst | 1 +
doc/board/toradex/colibri_imx7.rst | 127 +++++++++++++++++++++++++++++
doc/board/toradex/index.rst | 9 ++
3 files changed, 137 insertions(+)
create mode 100644 doc/board/toradex/colibri_imx7.rst
create mode 100644 doc/board/toradex/index.rst
diff --git a/doc/board/index.rst b/doc/board/index.rst
index 00e72f57cd..f2f5907b8c 100644
--- a/doc/board/index.rst
+++ b/doc/board/index.rst
@@ -15,4 +15,5 @@ Board-specific doc
intel/index
renesas/index
sifive/index
+ toradex/index
xilinx/index
diff --git a/doc/board/toradex/colibri_imx7.rst b/doc/board/toradex/colibri_imx7.rst
new file mode 100644
index 0000000000..0c7ae082d0
--- /dev/null
+++ b/doc/board/toradex/colibri_imx7.rst
@@ -0,0 +1,127 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Colibri iMX7
+============
+
+Quick Start
+-----------
+
+- Build U-Boot
+- NAND IMX image adjustments before flashing
+- Flashing manually U-Boot to eMMC
+- Flashing manually U-Boot to NAND
+- Using ``update_uboot`` script
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=arm-linux-gnueabi-
+ $ export ARCH=arm
+ $ make colibri_imx7_emmc_defconfig # For NAND: colibri_imx7_defconfig
+ $ make
+
+After build succeeds, you will obtain final ``u-boot-dtb.imx`` IMX specific
+image, ready for flashing (but check next section for additional
+adjustments).
+
+Final IMX program image includes (section ``6.6.7`` from `IMX7DRM
+<https://www.nxp.com/webapp/Download?colCode=IMX7DRM>`_):
+
+* **Image vector table** (IVT) for BootROM
+* **Boot data** -indicates the program image location, program image size
+ in bytes, and the plugin flag.
+* **Device configuration data**
+* **User image**: U-Boot image (``u-boot-dtb.bin``)
+
+
+IMX image adjustments prior to flashing
+--------------------------------------------
+
+1. U-Boot for both Colibri iMX7 NAND and eMMC versions
+is built with HABv4 support (`AN4581.pdf
+<https://www.nxp.com/docs/en/application-note/AN4581.pdf>`_)
+enabled by default, which requires to generate a proper
+Command Sequence File (CSF) by srktool from NXP (not included in the
+U-Boot tree, check additional details in introduction_habv4.txt)
+and concatenate it to the final ``u-boot-dtb.imx``.
+
+2. In case if you don't want to generate a proper ``CSF`` (for any reason),
+you still need to pad the IMX image so i has the same size as specified in
+in **Boot Data** section of IMX image.
+To obtain this value, run:
+
+.. code-block:: bash
+
+ $ od -X -N 0x30 u-boot-dtb.imx
+ 0000000 402000d1 87800000 00000000 877ff42c
+ 0000020 877ff420 877ff400 878a5000 00000000
+ ^^^^^^^^
+ 0000040 877ff000 000a8060 00000000 40b401d2
+ ^^^^^^^^ ^^^^^^^^
+
+Where:
+
+* ``877ff400`` - IVT self address
+* ``877ff000`` - Program image address
+* ``000a8060`` - Program image size
+
+To calculate the padding:
+
+* IVT offset = ``0x877ff400`` - ``0x877ff000`` = ``0x400``
+* Program image size = ``0xa8060`` - ``0x400`` = ``0xa7c60``
+
+and then pad the image:
+
+.. code-block:: bash
+
+ $ objcopy -I binary -O binary --pad-to 0xa7c60 --gap-fill=0x00 \
+ u-boot-dtb.imx u-boot-dtb.imx.zero-padded
+
+3. Also, according to requirement from ``6.6.7.1``, the final image
+should have ``0x400`` offset for initial IVT table.
+
+For eMMC setup we handle this by flashing it to ``0x400``, howewer
+for NAND setup we adjust the image prior to flashing, adding padding in the
+beginning of the image.
+
+.. code-block:: bash
+
+ $ dd if=u-boot-dtb.imx.zero-padded of=u-boot-dtb.imx.ready bs=1024 seek=1
+
+Flash U-Boot IMX image to eMMC
+------------------------------
+
+Flash the ``u-boot-dtb.imx.zero-padded`` binary to the primary eMMC hardware
+boot area partition:
+
+.. code-block:: bash
+
+
+ => load mmc 1:1 $loadaddr u-boot-dtb.imx.zero-padded
+ => setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
+ => mmc dev 0 1
+ => mmc write ${loadaddr} 0x2 ${blkcnt}
+
+Flash U-Boot IMX image to NAND
+------------------------------
+
+.. code-block:: bash
+
+ => load mmc 1:1 $loadaddr u-boot-dtb.imx.ready
+ => nand erase.part u-boot1
+ => nand write ${loadaddr} u-boot1 ${filesize}
+ => nand erase.part u-boot2
+ => nand write ${loadaddr} u-boot2 ${filesize}
+
+Using update_uboot script
+-------------------------
+
+You can also usb U-Boot env update_uboot script,
+which wraps all eMMC/NAND specific command invocation:
+
+.. code-block:: bash
+
+ => load mmc 1:1 $loadaddr u-boot-dtb.imx.ready
+ => run update_uboot
diff --git a/doc/board/toradex/index.rst b/doc/board/toradex/index.rst
new file mode 100644
index 0000000000..aa418d6bad
--- /dev/null
+++ b/doc/board/toradex/index.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Toradex
+=======
+
+.. toctree::
+ :maxdepth: 2
+
+ colibri_imx7
--
2.17.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v5 1/6] doc: board: toradex: add colibri_imx7.rst
2020-02-12 15:14 ` [PATCH v5 1/6] doc: board: toradex: add colibri_imx7.rst Igor Opaniuk
@ 2020-02-12 15:45 ` Oleksandr Suvorov
2020-02-20 13:26 ` Bin Meng
1 sibling, 0 replies; 19+ messages in thread
From: Oleksandr Suvorov @ 2020-02-12 15:45 UTC (permalink / raw)
To: u-boot
On Wed, Feb 12, 2020 at 5:15 PM Igor Opaniuk <igor.opaniuk@gmail.com> wrote:
>
> From: Igor Opaniuk <igor.opaniuk@toradex.com>
>
> - add initial index for toradex boards reST documentation
> - add initial colibri_imx7.rst doc file which provides all needed
> information for obtaining a workable image ready for flashing
> for both eMMC/NAND versions of Colibri iMX7.
>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
> ---
>
> doc/board/index.rst | 1 +
> doc/board/toradex/colibri_imx7.rst | 127 +++++++++++++++++++++++++++++
> doc/board/toradex/index.rst | 9 ++
> 3 files changed, 137 insertions(+)
> create mode 100644 doc/board/toradex/colibri_imx7.rst
> create mode 100644 doc/board/toradex/index.rst
>
> diff --git a/doc/board/index.rst b/doc/board/index.rst
> index 00e72f57cd..f2f5907b8c 100644
> --- a/doc/board/index.rst
> +++ b/doc/board/index.rst
> @@ -15,4 +15,5 @@ Board-specific doc
> intel/index
> renesas/index
> sifive/index
> + toradex/index
> xilinx/index
> diff --git a/doc/board/toradex/colibri_imx7.rst b/doc/board/toradex/colibri_imx7.rst
> new file mode 100644
> index 0000000000..0c7ae082d0
> --- /dev/null
> +++ b/doc/board/toradex/colibri_imx7.rst
> @@ -0,0 +1,127 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +Colibri iMX7
> +============
> +
> +Quick Start
> +-----------
> +
> +- Build U-Boot
> +- NAND IMX image adjustments before flashing
> +- Flashing manually U-Boot to eMMC
> +- Flashing manually U-Boot to NAND
> +- Using ``update_uboot`` script
> +
> +Build U-Boot
> +------------
> +
> +.. code-block:: bash
> +
> + $ export CROSS_COMPILE=arm-linux-gnueabi-
> + $ export ARCH=arm
> + $ make colibri_imx7_emmc_defconfig # For NAND: colibri_imx7_defconfig
> + $ make
> +
> +After build succeeds, you will obtain final ``u-boot-dtb.imx`` IMX specific
> +image, ready for flashing (but check next section for additional
> +adjustments).
> +
> +Final IMX program image includes (section ``6.6.7`` from `IMX7DRM
> +<https://www.nxp.com/webapp/Download?colCode=IMX7DRM>`_):
> +
> +* **Image vector table** (IVT) for BootROM
> +* **Boot data** -indicates the program image location, program image size
> + in bytes, and the plugin flag.
> +* **Device configuration data**
> +* **User image**: U-Boot image (``u-boot-dtb.bin``)
> +
> +
> +IMX image adjustments prior to flashing
> +--------------------------------------------
> +
> +1. U-Boot for both Colibri iMX7 NAND and eMMC versions
> +is built with HABv4 support (`AN4581.pdf
> +<https://www.nxp.com/docs/en/application-note/AN4581.pdf>`_)
> +enabled by default, which requires to generate a proper
> +Command Sequence File (CSF) by srktool from NXP (not included in the
> +U-Boot tree, check additional details in introduction_habv4.txt)
> +and concatenate it to the final ``u-boot-dtb.imx``.
> +
> +2. In case if you don't want to generate a proper ``CSF`` (for any reason),
> +you still need to pad the IMX image so i has the same size as specified in
> +in **Boot Data** section of IMX image.
> +To obtain this value, run:
> +
> +.. code-block:: bash
> +
> + $ od -X -N 0x30 u-boot-dtb.imx
> + 0000000 402000d1 87800000 00000000 877ff42c
> + 0000020 877ff420 877ff400 878a5000 00000000
> + ^^^^^^^^
> + 0000040 877ff000 000a8060 00000000 40b401d2
> + ^^^^^^^^ ^^^^^^^^
> +
> +Where:
> +
> +* ``877ff400`` - IVT self address
> +* ``877ff000`` - Program image address
> +* ``000a8060`` - Program image size
> +
> +To calculate the padding:
> +
> +* IVT offset = ``0x877ff400`` - ``0x877ff000`` = ``0x400``
> +* Program image size = ``0xa8060`` - ``0x400`` = ``0xa7c60``
> +
> +and then pad the image:
> +
> +.. code-block:: bash
> +
> + $ objcopy -I binary -O binary --pad-to 0xa7c60 --gap-fill=0x00 \
> + u-boot-dtb.imx u-boot-dtb.imx.zero-padded
> +
> +3. Also, according to requirement from ``6.6.7.1``, the final image
> +should have ``0x400`` offset for initial IVT table.
> +
> +For eMMC setup we handle this by flashing it to ``0x400``, howewer
> +for NAND setup we adjust the image prior to flashing, adding padding in the
> +beginning of the image.
> +
> +.. code-block:: bash
> +
> + $ dd if=u-boot-dtb.imx.zero-padded of=u-boot-dtb.imx.ready bs=1024 seek=1
> +
> +Flash U-Boot IMX image to eMMC
> +------------------------------
> +
> +Flash the ``u-boot-dtb.imx.zero-padded`` binary to the primary eMMC hardware
> +boot area partition:
> +
> +.. code-block:: bash
> +
> +
> + => load mmc 1:1 $loadaddr u-boot-dtb.imx.zero-padded
> + => setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
> + => mmc dev 0 1
> + => mmc write ${loadaddr} 0x2 ${blkcnt}
> +
> +Flash U-Boot IMX image to NAND
> +------------------------------
> +
> +.. code-block:: bash
> +
> + => load mmc 1:1 $loadaddr u-boot-dtb.imx.ready
> + => nand erase.part u-boot1
> + => nand write ${loadaddr} u-boot1 ${filesize}
> + => nand erase.part u-boot2
> + => nand write ${loadaddr} u-boot2 ${filesize}
> +
> +Using update_uboot script
> +-------------------------
> +
> +You can also usb U-Boot env update_uboot script,
> +which wraps all eMMC/NAND specific command invocation:
> +
> +.. code-block:: bash
> +
> + => load mmc 1:1 $loadaddr u-boot-dtb.imx.ready
> + => run update_uboot
> diff --git a/doc/board/toradex/index.rst b/doc/board/toradex/index.rst
> new file mode 100644
> index 0000000000..aa418d6bad
> --- /dev/null
> +++ b/doc/board/toradex/index.rst
> @@ -0,0 +1,9 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +Toradex
> +=======
> +
> +.. toctree::
> + :maxdepth: 2
> +
> + colibri_imx7
> --
> 2.17.1
>
--
Best regards
Oleksandr Suvorov
Toradex AG
Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500
4800 (main line)
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH v5 1/6] doc: board: toradex: add colibri_imx7.rst
2020-02-12 15:14 ` [PATCH v5 1/6] doc: board: toradex: add colibri_imx7.rst Igor Opaniuk
2020-02-12 15:45 ` Oleksandr Suvorov
@ 2020-02-20 13:26 ` Bin Meng
1 sibling, 0 replies; 19+ messages in thread
From: Bin Meng @ 2020-02-20 13:26 UTC (permalink / raw)
To: u-boot
On Wed, Feb 12, 2020 at 11:14 PM Igor Opaniuk <igor.opaniuk@gmail.com> wrote:
>
> From: Igor Opaniuk <igor.opaniuk@toradex.com>
>
> - add initial index for toradex boards reST documentation
> - add initial colibri_imx7.rst doc file which provides all needed
> information for obtaining a workable image ready for flashing
> for both eMMC/NAND versions of Colibri iMX7.
>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
> ---
>
> doc/board/index.rst | 1 +
> doc/board/toradex/colibri_imx7.rst | 127 +++++++++++++++++++++++++++++
> doc/board/toradex/index.rst | 9 ++
> 3 files changed, 137 insertions(+)
> create mode 100644 doc/board/toradex/colibri_imx7.rst
> create mode 100644 doc/board/toradex/index.rst
>
> diff --git a/doc/board/index.rst b/doc/board/index.rst
> index 00e72f57cd..f2f5907b8c 100644
> --- a/doc/board/index.rst
> +++ b/doc/board/index.rst
> @@ -15,4 +15,5 @@ Board-specific doc
> intel/index
> renesas/index
> sifive/index
> + toradex/index
> xilinx/index
> diff --git a/doc/board/toradex/colibri_imx7.rst b/doc/board/toradex/colibri_imx7.rst
> new file mode 100644
> index 0000000000..0c7ae082d0
> --- /dev/null
> +++ b/doc/board/toradex/colibri_imx7.rst
> @@ -0,0 +1,127 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +Colibri iMX7
> +============
> +
> +Quick Start
> +-----------
> +
> +- Build U-Boot
> +- NAND IMX image adjustments before flashing
> +- Flashing manually U-Boot to eMMC
> +- Flashing manually U-Boot to NAND
> +- Using ``update_uboot`` script
> +
> +Build U-Boot
> +------------
> +
> +.. code-block:: bash
> +
> + $ export CROSS_COMPILE=arm-linux-gnueabi-
> + $ export ARCH=arm
> + $ make colibri_imx7_emmc_defconfig # For NAND: colibri_imx7_defconfig
> + $ make
> +
> +After build succeeds, you will obtain final ``u-boot-dtb.imx`` IMX specific
> +image, ready for flashing (but check next section for additional
> +adjustments).
> +
> +Final IMX program image includes (section ``6.6.7`` from `IMX7DRM
> +<https://www.nxp.com/webapp/Download?colCode=IMX7DRM>`_):
> +
> +* **Image vector table** (IVT) for BootROM
> +* **Boot data** -indicates the program image location, program image size
> + in bytes, and the plugin flag.
> +* **Device configuration data**
> +* **User image**: U-Boot image (``u-boot-dtb.bin``)
> +
> +
> +IMX image adjustments prior to flashing
> +--------------------------------------------
nits: title underline length should match the title
> +
> +1. U-Boot for both Colibri iMX7 NAND and eMMC versions
> +is built with HABv4 support (`AN4581.pdf
> +<https://www.nxp.com/docs/en/application-note/AN4581.pdf>`_)
> +enabled by default, which requires to generate a proper
> +Command Sequence File (CSF) by srktool from NXP (not included in the
> +U-Boot tree, check additional details in introduction_habv4.txt)
> +and concatenate it to the final ``u-boot-dtb.imx``.
> +
> +2. In case if you don't want to generate a proper ``CSF`` (for any reason),
> +you still need to pad the IMX image so i has the same size as specified in
> +in **Boot Data** section of IMX image.
> +To obtain this value, run:
> +
Will fix the nits when applying.
Tested the doc build, no warnings
Tested-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 2/6] doc: board: verdin-imx8mm: convert readme to reST
2020-02-12 15:14 [PATCH v5 0/6] doc: board: toradex reST documentation Igor Opaniuk
2020-02-12 15:14 ` [PATCH v5 1/6] doc: board: toradex: add colibri_imx7.rst Igor Opaniuk
@ 2020-02-12 15:14 ` Igor Opaniuk
2020-02-12 15:46 ` Oleksandr Suvorov
2020-02-20 13:24 ` Bin Meng
2020-02-12 15:14 ` [PATCH v5 3/6] doc: board: apalis-imx8: " Igor Opaniuk
` (4 subsequent siblings)
6 siblings, 2 replies; 19+ messages in thread
From: Igor Opaniuk @ 2020-02-12 15:14 UTC (permalink / raw)
To: u-boot
From: Igor Opaniuk <igor.opaniuk@toradex.com>
Convert README to reStructuredText format.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---
board/toradex/verdin-imx8mm/README | 88 ----------------------
doc/board/toradex/index.rst | 1 +
doc/board/toradex/verdin-imx8mm.rst | 112 ++++++++++++++++++++++++++++
3 files changed, 113 insertions(+), 88 deletions(-)
delete mode 100644 board/toradex/verdin-imx8mm/README
create mode 100644 doc/board/toradex/verdin-imx8mm.rst
diff --git a/board/toradex/verdin-imx8mm/README b/board/toradex/verdin-imx8mm/README
deleted file mode 100644
index 1dac969476..0000000000
--- a/board/toradex/verdin-imx8mm/README
+++ /dev/null
@@ -1,88 +0,0 @@
-U-Boot for the Toradex Verdin iMX8M Mini Module
-
-Quick Start
-===========
-
-- Build the ARM trusted firmware binary
-- Get the DDR firmware
-- Build U-Boot
-- Flash to eMMC
-- Boot
-
-Get and Build the ARM Trusted Firmware (Trusted Firmware A)
-===========================================================
-
-$ echo "Downloading and building TF-A..."
-$ git clone -b imx_4.14.98_2.3.0 https://source.codeaurora.org/external/imx/imx-atf
-$ cd imx-atf
-
-Please edit `plat/imx/imx8mm/include/platform_def.h` so it contains proper
-values for UART configuration and BL31 base address (correct values listed
-below):
-#define BL31_BASE 0x910000
-#define IMX_BOOT_UART_BASE 0x30860000
-#define DEBUG_CONSOLE 1
-
-Then build ATF (TF-A):
-$ make PLAT=imx8mm bl31
-
-Get the DDR Firmware
-====================
-
-$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.4.1.bin
-$ chmod +x firmware-imx-8.4.1.bin
-$ ./firmware-imx-8.4.1.bin
-$ cp firmware-imx-8.4.1/firmware/ddr/synopsys/lpddr4*.bin ./
-
-Build U-Boot
-============
-
-$ export CROSS_COMPILE=aarch64-linux-gnu-
-$ make verdin-imx8mm_defconfig
-$ make flash.bin
-
-Flash to eMMC
-=============
-
-> tftpboot ${loadaddr} flash.bin
-> setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
-> mmc dev 0 1 && mmc write ${loadaddr} 0x2 ${blkcnt}
-
-As a convenience, instead of the last two commands one may also use the update
-U-Boot wrapper:
-> run update_uboot
-
-Boot
-====
-
-ATF, U-boot proper and u-boot.dtb images are packed into FIT image,
-which is loaded and parsed by SPL.
-
-Boot sequence is:
-SPL ---> ATF (TF-A) ---> U-boot proper
-
-Output:
-U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
-Normal Boot
-Trying to boot from MMC1
-NOTICE: Configuring TZASC380
-NOTICE: RDC off
-NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty
-NOTICE: BL31: Built : 01:11:41, Jan 25 2020
-NOTICE: sip svc init
-
-
-U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
-
-CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz
-Reset cause: POR
-DRAM: 2 GiB
-MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
-Loading Environment from MMC... OK
-In: serial
-Out: serial
-Err: serial
-Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial# 06535149
-Net: eth0: ethernet at 30be0000
-Hit any key to stop autoboot: 0
-Verdin iMX8MM #
diff --git a/doc/board/toradex/index.rst b/doc/board/toradex/index.rst
index aa418d6bad..6cd2ade9f4 100644
--- a/doc/board/toradex/index.rst
+++ b/doc/board/toradex/index.rst
@@ -7,3 +7,4 @@ Toradex
:maxdepth: 2
colibri_imx7
+ verdin-imx8mm
diff --git a/doc/board/toradex/verdin-imx8mm.rst b/doc/board/toradex/verdin-imx8mm.rst
new file mode 100644
index 0000000000..4ed16fce34
--- /dev/null
+++ b/doc/board/toradex/verdin-imx8mm.rst
@@ -0,0 +1,112 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Verdin iMX8M Mini Module
+========================
+
+Quick Start
+-----------
+
+- Build the ARM trusted firmware binary
+- Get the DDR firmware
+- Build U-Boot
+- Flash to eMMC
+- Boot
+
+Get and Build the ARM Trusted Firmware (Trusted Firmware A)
+-----------------------------------------------------------
+
+.. code-block:: bash
+
+ $ echo "Downloading and building TF-A..."
+ $ git clone -b imx_4.14.98_2.3.0 \
+ https://source.codeaurora.org/external/imx/imx-atf
+ $ cd imx-atf
+
+Please edit ``plat/imx/imx8mm/include/platform_def.h`` so it contains proper
+values for UART configuration and BL31 base address (correct values listed
+below):
+
+.. code-block:: bash
+
+ #define BL31_BASE 0x910000
+ #define IMX_BOOT_UART_BASE 0x30860000
+ #define DEBUG_CONSOLE 1
+
+Then build ATF (TF-A):
+
+.. code-block:: bash
+
+ $ make PLAT=imx8mm bl31
+
+Get the DDR Firmware
+--------------------
+
+.. code-block:: bash
+
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.4.1.bin
+ $ chmod +x firmware-imx-8.4.1.bin
+ $ ./firmware-imx-8.4.1.bin
+ $ cp firmware-imx-8.4.1/firmware/ddr/synopsys/lpddr4*.bin ./
+
+Build U-Boot
+------------
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-linux-gnu-
+ $ make verdin-imx8mm_defconfig
+ $ make flash.bin
+
+Flash to eMMC
+-------------
+
+.. code-block:: bash
+
+ > tftpboot ${loadaddr} flash.bin
+ > setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
+ > mmc dev 0 1 && mmc write ${loadaddr} 0x2 ${blkcnt}
+
+As a convenience, instead of the last two commands one may also use the update
+U-Boot wrapper:
+
+.. code-block:: bash
+
+ > run update_uboot
+
+Boot
+----
+
+ATF, U-boot proper and u-boot.dtb images are packed into FIT image,
+which is loaded and parsed by SPL.
+
+Boot sequence is:
+
+* SPL ---> ATF (TF-A) ---> U-boot proper
+
+Output:
+
+.. code-block:: bash
+
+ U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
+ Normal Boot
+ Trying to boot from MMC1
+ NOTICE: Configuring TZASC380
+ NOTICE: RDC off
+ NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty
+ NOTICE: BL31: Built : 01:11:41, Jan 25 2020
+ NOTICE: sip svc init
+
+
+ U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
+
+ CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz
+ Reset cause: POR
+ DRAM: 2 GiB
+ MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
+ Loading Environment from MMC... OK
+ In: serial
+ Out: serial
+ Err: serial
+ Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial:
+ Net: eth0: ethernet at 30be0000
+ Hit any key to stop autoboot: 0
+ Verdin iMX8MM #
--
2.17.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v5 2/6] doc: board: verdin-imx8mm: convert readme to reST
2020-02-12 15:14 ` [PATCH v5 2/6] doc: board: verdin-imx8mm: convert readme to reST Igor Opaniuk
@ 2020-02-12 15:46 ` Oleksandr Suvorov
2020-02-20 13:24 ` Bin Meng
1 sibling, 0 replies; 19+ messages in thread
From: Oleksandr Suvorov @ 2020-02-12 15:46 UTC (permalink / raw)
To: u-boot
On Wed, Feb 12, 2020 at 5:15 PM Igor Opaniuk <igor.opaniuk@gmail.com> wrote:
>
> From: Igor Opaniuk <igor.opaniuk@toradex.com>
>
> Convert README to reStructuredText format.
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
> ---
>
> board/toradex/verdin-imx8mm/README | 88 ----------------------
> doc/board/toradex/index.rst | 1 +
> doc/board/toradex/verdin-imx8mm.rst | 112 ++++++++++++++++++++++++++++
> 3 files changed, 113 insertions(+), 88 deletions(-)
> delete mode 100644 board/toradex/verdin-imx8mm/README
> create mode 100644 doc/board/toradex/verdin-imx8mm.rst
>
> diff --git a/board/toradex/verdin-imx8mm/README b/board/toradex/verdin-imx8mm/README
> deleted file mode 100644
> index 1dac969476..0000000000
> --- a/board/toradex/verdin-imx8mm/README
> +++ /dev/null
> @@ -1,88 +0,0 @@
> -U-Boot for the Toradex Verdin iMX8M Mini Module
> -
> -Quick Start
> -===========
> -
> -- Build the ARM trusted firmware binary
> -- Get the DDR firmware
> -- Build U-Boot
> -- Flash to eMMC
> -- Boot
> -
> -Get and Build the ARM Trusted Firmware (Trusted Firmware A)
> -===========================================================
> -
> -$ echo "Downloading and building TF-A..."
> -$ git clone -b imx_4.14.98_2.3.0 https://source.codeaurora.org/external/imx/imx-atf
> -$ cd imx-atf
> -
> -Please edit `plat/imx/imx8mm/include/platform_def.h` so it contains proper
> -values for UART configuration and BL31 base address (correct values listed
> -below):
> -#define BL31_BASE 0x910000
> -#define IMX_BOOT_UART_BASE 0x30860000
> -#define DEBUG_CONSOLE 1
> -
> -Then build ATF (TF-A):
> -$ make PLAT=imx8mm bl31
> -
> -Get the DDR Firmware
> -====================
> -
> -$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.4.1.bin
> -$ chmod +x firmware-imx-8.4.1.bin
> -$ ./firmware-imx-8.4.1.bin
> -$ cp firmware-imx-8.4.1/firmware/ddr/synopsys/lpddr4*.bin ./
> -
> -Build U-Boot
> -============
> -
> -$ export CROSS_COMPILE=aarch64-linux-gnu-
> -$ make verdin-imx8mm_defconfig
> -$ make flash.bin
> -
> -Flash to eMMC
> -=============
> -
> -> tftpboot ${loadaddr} flash.bin
> -> setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
> -> mmc dev 0 1 && mmc write ${loadaddr} 0x2 ${blkcnt}
> -
> -As a convenience, instead of the last two commands one may also use the update
> -U-Boot wrapper:
> -> run update_uboot
> -
> -Boot
> -====
> -
> -ATF, U-boot proper and u-boot.dtb images are packed into FIT image,
> -which is loaded and parsed by SPL.
> -
> -Boot sequence is:
> -SPL ---> ATF (TF-A) ---> U-boot proper
> -
> -Output:
> -U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
> -Normal Boot
> -Trying to boot from MMC1
> -NOTICE: Configuring TZASC380
> -NOTICE: RDC off
> -NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty
> -NOTICE: BL31: Built : 01:11:41, Jan 25 2020
> -NOTICE: sip svc init
> -
> -
> -U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
> -
> -CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz
> -Reset cause: POR
> -DRAM: 2 GiB
> -MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
> -Loading Environment from MMC... OK
> -In: serial
> -Out: serial
> -Err: serial
> -Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial# 06535149
> -Net: eth0: ethernet at 30be0000
> -Hit any key to stop autoboot: 0
> -Verdin iMX8MM #
> diff --git a/doc/board/toradex/index.rst b/doc/board/toradex/index.rst
> index aa418d6bad..6cd2ade9f4 100644
> --- a/doc/board/toradex/index.rst
> +++ b/doc/board/toradex/index.rst
> @@ -7,3 +7,4 @@ Toradex
> :maxdepth: 2
>
> colibri_imx7
> + verdin-imx8mm
> diff --git a/doc/board/toradex/verdin-imx8mm.rst b/doc/board/toradex/verdin-imx8mm.rst
> new file mode 100644
> index 0000000000..4ed16fce34
> --- /dev/null
> +++ b/doc/board/toradex/verdin-imx8mm.rst
> @@ -0,0 +1,112 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +Verdin iMX8M Mini Module
> +========================
> +
> +Quick Start
> +-----------
> +
> +- Build the ARM trusted firmware binary
> +- Get the DDR firmware
> +- Build U-Boot
> +- Flash to eMMC
> +- Boot
> +
> +Get and Build the ARM Trusted Firmware (Trusted Firmware A)
> +-----------------------------------------------------------
> +
> +.. code-block:: bash
> +
> + $ echo "Downloading and building TF-A..."
> + $ git clone -b imx_4.14.98_2.3.0 \
> + https://source.codeaurora.org/external/imx/imx-atf
> + $ cd imx-atf
> +
> +Please edit ``plat/imx/imx8mm/include/platform_def.h`` so it contains proper
> +values for UART configuration and BL31 base address (correct values listed
> +below):
> +
> +.. code-block:: bash
> +
> + #define BL31_BASE 0x910000
> + #define IMX_BOOT_UART_BASE 0x30860000
> + #define DEBUG_CONSOLE 1
> +
> +Then build ATF (TF-A):
> +
> +.. code-block:: bash
> +
> + $ make PLAT=imx8mm bl31
> +
> +Get the DDR Firmware
> +--------------------
> +
> +.. code-block:: bash
> +
> + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.4.1.bin
> + $ chmod +x firmware-imx-8.4.1.bin
> + $ ./firmware-imx-8.4.1.bin
> + $ cp firmware-imx-8.4.1/firmware/ddr/synopsys/lpddr4*.bin ./
> +
> +Build U-Boot
> +------------
> +.. code-block:: bash
> +
> + $ export CROSS_COMPILE=aarch64-linux-gnu-
> + $ make verdin-imx8mm_defconfig
> + $ make flash.bin
> +
> +Flash to eMMC
> +-------------
> +
> +.. code-block:: bash
> +
> + > tftpboot ${loadaddr} flash.bin
> + > setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
> + > mmc dev 0 1 && mmc write ${loadaddr} 0x2 ${blkcnt}
> +
> +As a convenience, instead of the last two commands one may also use the update
> +U-Boot wrapper:
> +
> +.. code-block:: bash
> +
> + > run update_uboot
> +
> +Boot
> +----
> +
> +ATF, U-boot proper and u-boot.dtb images are packed into FIT image,
> +which is loaded and parsed by SPL.
> +
> +Boot sequence is:
> +
> +* SPL ---> ATF (TF-A) ---> U-boot proper
> +
> +Output:
> +
> +.. code-block:: bash
> +
> + U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
> + Normal Boot
> + Trying to boot from MMC1
> + NOTICE: Configuring TZASC380
> + NOTICE: RDC off
> + NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty
> + NOTICE: BL31: Built : 01:11:41, Jan 25 2020
> + NOTICE: sip svc init
> +
> +
> + U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
> +
> + CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz
> + Reset cause: POR
> + DRAM: 2 GiB
> + MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
> + Loading Environment from MMC... OK
> + In: serial
> + Out: serial
> + Err: serial
> + Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial:
> + Net: eth0: ethernet at 30be0000
> + Hit any key to stop autoboot: 0
> + Verdin iMX8MM #
> --
> 2.17.1
>
--
Best regards
Oleksandr Suvorov
Toradex AG
Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500
4800 (main line)
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH v5 2/6] doc: board: verdin-imx8mm: convert readme to reST
2020-02-12 15:14 ` [PATCH v5 2/6] doc: board: verdin-imx8mm: convert readme to reST Igor Opaniuk
2020-02-12 15:46 ` Oleksandr Suvorov
@ 2020-02-20 13:24 ` Bin Meng
1 sibling, 0 replies; 19+ messages in thread
From: Bin Meng @ 2020-02-20 13:24 UTC (permalink / raw)
To: u-boot
On Wed, Feb 12, 2020 at 11:14 PM Igor Opaniuk <igor.opaniuk@gmail.com> wrote:
>
> From: Igor Opaniuk <igor.opaniuk@toradex.com>
>
> Convert README to reStructuredText format.
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
> ---
>
> board/toradex/verdin-imx8mm/README | 88 ----------------------
> doc/board/toradex/index.rst | 1 +
> doc/board/toradex/verdin-imx8mm.rst | 112 ++++++++++++++++++++++++++++
> 3 files changed, 113 insertions(+), 88 deletions(-)
> delete mode 100644 board/toradex/verdin-imx8mm/README
> create mode 100644 doc/board/toradex/verdin-imx8mm.rst
>
> diff --git a/board/toradex/verdin-imx8mm/README b/board/toradex/verdin-imx8mm/README
> deleted file mode 100644
> index 1dac969476..0000000000
> --- a/board/toradex/verdin-imx8mm/README
> +++ /dev/null
> @@ -1,88 +0,0 @@
> -U-Boot for the Toradex Verdin iMX8M Mini Module
> -
> -Quick Start
> -===========
> -
> -- Build the ARM trusted firmware binary
> -- Get the DDR firmware
> -- Build U-Boot
> -- Flash to eMMC
> -- Boot
> -
> -Get and Build the ARM Trusted Firmware (Trusted Firmware A)
> -===========================================================
> -
> -$ echo "Downloading and building TF-A..."
> -$ git clone -b imx_4.14.98_2.3.0 https://source.codeaurora.org/external/imx/imx-atf
> -$ cd imx-atf
> -
> -Please edit `plat/imx/imx8mm/include/platform_def.h` so it contains proper
> -values for UART configuration and BL31 base address (correct values listed
> -below):
> -#define BL31_BASE 0x910000
> -#define IMX_BOOT_UART_BASE 0x30860000
> -#define DEBUG_CONSOLE 1
> -
> -Then build ATF (TF-A):
> -$ make PLAT=imx8mm bl31
> -
> -Get the DDR Firmware
> -====================
> -
> -$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.4.1.bin
> -$ chmod +x firmware-imx-8.4.1.bin
> -$ ./firmware-imx-8.4.1.bin
> -$ cp firmware-imx-8.4.1/firmware/ddr/synopsys/lpddr4*.bin ./
> -
> -Build U-Boot
> -============
> -
> -$ export CROSS_COMPILE=aarch64-linux-gnu-
> -$ make verdin-imx8mm_defconfig
> -$ make flash.bin
> -
> -Flash to eMMC
> -=============
> -
> -> tftpboot ${loadaddr} flash.bin
> -> setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
> -> mmc dev 0 1 && mmc write ${loadaddr} 0x2 ${blkcnt}
> -
> -As a convenience, instead of the last two commands one may also use the update
> -U-Boot wrapper:
> -> run update_uboot
> -
> -Boot
> -====
> -
> -ATF, U-boot proper and u-boot.dtb images are packed into FIT image,
nits: U-Boot
> -which is loaded and parsed by SPL.
> -
> -Boot sequence is:
> -SPL ---> ATF (TF-A) ---> U-boot proper
nits: U-Boot
> -
> -Output:
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Will fix the nits when applying
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 3/6] doc: board: apalis-imx8: convert readme to reST
2020-02-12 15:14 [PATCH v5 0/6] doc: board: toradex reST documentation Igor Opaniuk
2020-02-12 15:14 ` [PATCH v5 1/6] doc: board: toradex: add colibri_imx7.rst Igor Opaniuk
2020-02-12 15:14 ` [PATCH v5 2/6] doc: board: verdin-imx8mm: convert readme to reST Igor Opaniuk
@ 2020-02-12 15:14 ` Igor Opaniuk
2020-02-12 15:46 ` Oleksandr Suvorov
2020-02-20 13:35 ` Bin Meng
2020-02-12 15:14 ` [PATCH v5 4/6] doc: board: colibri-imx8x: " Igor Opaniuk
` (3 subsequent siblings)
6 siblings, 2 replies; 19+ messages in thread
From: Igor Opaniuk @ 2020-02-12 15:14 UTC (permalink / raw)
To: u-boot
From: Igor Opaniuk <igor.opaniuk@toradex.com>
Convert README to reStructuredText format.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---
board/toradex/apalis-imx8/README | 66 -------------------------
doc/board/toradex/apalix-imx8.rst | 82 +++++++++++++++++++++++++++++++
doc/board/toradex/index.rst | 1 +
3 files changed, 83 insertions(+), 66 deletions(-)
delete mode 100644 board/toradex/apalis-imx8/README
create mode 100644 doc/board/toradex/apalix-imx8.rst
diff --git a/board/toradex/apalis-imx8/README b/board/toradex/apalis-imx8/README
deleted file mode 100644
index e6e3dcb367..0000000000
--- a/board/toradex/apalis-imx8/README
+++ /dev/null
@@ -1,66 +0,0 @@
-U-Boot for the Toradex Apalis iMX8QM V1.0B Module
-
-Quick Start
-===========
-
-- Build the ARM trusted firmware binary
-- Get scfw_tcm.bin and ahab-container.img
-- Build U-Boot
-- Load U-Boot binary using uuu
-- Flash U-Boot binary into the eMMC
-- Boot
-
-Get and Build the ARM Trusted Firmware
-======================================
-
-$ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf
-$ cd imx-atf/
-$ make PLAT=imx8qm bl31
-
-Get scfw_tcm.bin and ahab-container.img
-=======================================
-
-$ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-bsp/imx-sc-firmware/files/mx8qm-apalis-scfw-tcm.bin?raw=true
-$ mv mx8qm-apalis-scfw-tcm.bin\?raw\=true mx8qm-apalis-scfw-tcm.bin
-$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
-$ chmod +x firmware-imx-8.0.bin
-$ ./firmware-imx-8.0.bin
-
-Copy the following binaries to the U-Boot folder:
-
-$ cp imx-atf/build/imx8qm/release/bl31.bin .
-$ cp u-boot/u-boot.bin .
-
-Copy the following firmware to the U-Boot folder:
-
-$ cp firmware-imx-8.0/firmware/seco/ahab-container.img .
-
-Build U-Boot
-============
-
-$ make apalis-imx8qm_defconfig
-$ make u-boot-dtb.imx
-
-Load the U-Boot Binary Using UUU
-================================
-
-Get the latest version of the universal update utility (uuu) aka mfgtools 3.0:
-
-https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
-
-Put the module into USB recovery aka serial downloader mode, connect USB device
-to your host and execute uuu:
-
-sudo ./uuu u-boot/u-boot-dtb.imx
-
-Flash the U-Boot Binary into the eMMC
-=====================================
-
-Burn the u-boot-dtb.imx binary to the primary eMMC hardware boot area partition:
-
-load mmc 1:1 $loadaddr u-boot-dtb.imx
-setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
-mmc dev 0 1
-mmc write ${loadaddr} 0x0 ${blkcnt}
-
-Boot
diff --git a/doc/board/toradex/apalix-imx8.rst b/doc/board/toradex/apalix-imx8.rst
new file mode 100644
index 0000000000..4b7ea65d31
--- /dev/null
+++ b/doc/board/toradex/apalix-imx8.rst
@@ -0,0 +1,82 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Apalis iMX8QM V1.0B Module
+==========================
+
+Quick Start
+-----------
+
+- Build the ARM trusted firmware binary
+- Get scfw_tcm.bin and ahab-container.img
+- Build U-Boot
+- Load U-Boot binary using uuu
+- Flash U-Boot binary into the eMMC
+- Boot
+
+Get and Build the ARM Trusted Firmware
+--------------------------------------
+
+.. code-block:: bash
+
+ $ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf
+ $ cd imx-atf/
+ $ make PLAT=imx8qm bl31
+
+Get scfw_tcm.bin and ahab-container.img
+---------------------------------------
+
+.. code-block:: bash
+
+ $ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-
+ bsp/imx-sc-firmware/files/mx8qm-apalis-scfw-tcm.bin?raw=true
+ $ mv mx8qm-apalis-scfw-tcm.bin\?raw\=true mx8qm-apalis-scfw-tcm.bin
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
+ $ chmod +x firmware-imx-8.0.bin
+ $ ./firmware-imx-8.0.bin
+
+Copy the following binaries to the U-Boot folder:
+
+.. code-block:: bash
+
+ $ cp imx-atf/build/imx8qm/release/bl31.bin .
+ $ cp u-boot/u-boot.bin .
+
+Copy the following firmware to the U-Boot folder:
+
+.. code-block:: bash
+
+ $ cp firmware-imx-8.0/firmware/seco/ahab-container.img .
+
+Build U-Boot
+------------
+.. code-block:: bash
+
+ $ make apalis-imx8qm_defconfig
+ $ make u-boot-dtb.imx
+
+Load the U-Boot Binary Using UUU
+--------------------------------
+
+Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``:
+
+https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
+
+Put the module into USB recovery aka serial downloader mode, connect USB device
+to your host and execute uuu:
+
+.. code-block:: bash
+
+ sudo ./uuu u-boot/u-boot-dtb.imx
+
+Flash the U-Boot Binary into the eMMC
+-------------------------------------
+
+Burn the ``u-boot-dtb.imx`` binary to the primary eMMC hardware boot area
+partition and boot:
+
+.. code-block:: bash
+
+ load mmc 1:1 $loadaddr u-boot-dtb.imx
+ setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
+ mmc dev 0 1
+ mmc write ${loadaddr} 0x0 ${blkcnt}
diff --git a/doc/board/toradex/index.rst b/doc/board/toradex/index.rst
index 6cd2ade9f4..da65ad2408 100644
--- a/doc/board/toradex/index.rst
+++ b/doc/board/toradex/index.rst
@@ -6,5 +6,6 @@ Toradex
.. toctree::
:maxdepth: 2
+ apalix-imx8
colibri_imx7
verdin-imx8mm
--
2.17.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v5 3/6] doc: board: apalis-imx8: convert readme to reST
2020-02-12 15:14 ` [PATCH v5 3/6] doc: board: apalis-imx8: " Igor Opaniuk
@ 2020-02-12 15:46 ` Oleksandr Suvorov
2020-02-20 13:35 ` Bin Meng
1 sibling, 0 replies; 19+ messages in thread
From: Oleksandr Suvorov @ 2020-02-12 15:46 UTC (permalink / raw)
To: u-boot
On Wed, Feb 12, 2020 at 5:15 PM Igor Opaniuk <igor.opaniuk@gmail.com> wrote:
>
> From: Igor Opaniuk <igor.opaniuk@toradex.com>
>
> Convert README to reStructuredText format.
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
> ---
>
> board/toradex/apalis-imx8/README | 66 -------------------------
> doc/board/toradex/apalix-imx8.rst | 82 +++++++++++++++++++++++++++++++
> doc/board/toradex/index.rst | 1 +
> 3 files changed, 83 insertions(+), 66 deletions(-)
> delete mode 100644 board/toradex/apalis-imx8/README
> create mode 100644 doc/board/toradex/apalix-imx8.rst
>
> diff --git a/board/toradex/apalis-imx8/README b/board/toradex/apalis-imx8/README
> deleted file mode 100644
> index e6e3dcb367..0000000000
> --- a/board/toradex/apalis-imx8/README
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -U-Boot for the Toradex Apalis iMX8QM V1.0B Module
> -
> -Quick Start
> -===========
> -
> -- Build the ARM trusted firmware binary
> -- Get scfw_tcm.bin and ahab-container.img
> -- Build U-Boot
> -- Load U-Boot binary using uuu
> -- Flash U-Boot binary into the eMMC
> -- Boot
> -
> -Get and Build the ARM Trusted Firmware
> -======================================
> -
> -$ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf
> -$ cd imx-atf/
> -$ make PLAT=imx8qm bl31
> -
> -Get scfw_tcm.bin and ahab-container.img
> -=======================================
> -
> -$ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-bsp/imx-sc-firmware/files/mx8qm-apalis-scfw-tcm.bin?raw=true
> -$ mv mx8qm-apalis-scfw-tcm.bin\?raw\=true mx8qm-apalis-scfw-tcm.bin
> -$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
> -$ chmod +x firmware-imx-8.0.bin
> -$ ./firmware-imx-8.0.bin
> -
> -Copy the following binaries to the U-Boot folder:
> -
> -$ cp imx-atf/build/imx8qm/release/bl31.bin .
> -$ cp u-boot/u-boot.bin .
> -
> -Copy the following firmware to the U-Boot folder:
> -
> -$ cp firmware-imx-8.0/firmware/seco/ahab-container.img .
> -
> -Build U-Boot
> -============
> -
> -$ make apalis-imx8qm_defconfig
> -$ make u-boot-dtb.imx
> -
> -Load the U-Boot Binary Using UUU
> -================================
> -
> -Get the latest version of the universal update utility (uuu) aka mfgtools 3.0:
> -
> -https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
> -
> -Put the module into USB recovery aka serial downloader mode, connect USB device
> -to your host and execute uuu:
> -
> -sudo ./uuu u-boot/u-boot-dtb.imx
> -
> -Flash the U-Boot Binary into the eMMC
> -=====================================
> -
> -Burn the u-boot-dtb.imx binary to the primary eMMC hardware boot area partition:
> -
> -load mmc 1:1 $loadaddr u-boot-dtb.imx
> -setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
> -mmc dev 0 1
> -mmc write ${loadaddr} 0x0 ${blkcnt}
> -
> -Boot
> diff --git a/doc/board/toradex/apalix-imx8.rst b/doc/board/toradex/apalix-imx8.rst
> new file mode 100644
> index 0000000000..4b7ea65d31
> --- /dev/null
> +++ b/doc/board/toradex/apalix-imx8.rst
> @@ -0,0 +1,82 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +Apalis iMX8QM V1.0B Module
> +==========================
> +
> +Quick Start
> +-----------
> +
> +- Build the ARM trusted firmware binary
> +- Get scfw_tcm.bin and ahab-container.img
> +- Build U-Boot
> +- Load U-Boot binary using uuu
> +- Flash U-Boot binary into the eMMC
> +- Boot
> +
> +Get and Build the ARM Trusted Firmware
> +--------------------------------------
> +
> +.. code-block:: bash
> +
> + $ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf
> + $ cd imx-atf/
> + $ make PLAT=imx8qm bl31
> +
> +Get scfw_tcm.bin and ahab-container.img
> +---------------------------------------
> +
> +.. code-block:: bash
> +
> + $ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-
> + bsp/imx-sc-firmware/files/mx8qm-apalis-scfw-tcm.bin?raw=true
> + $ mv mx8qm-apalis-scfw-tcm.bin\?raw\=true mx8qm-apalis-scfw-tcm.bin
> + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
> + $ chmod +x firmware-imx-8.0.bin
> + $ ./firmware-imx-8.0.bin
> +
> +Copy the following binaries to the U-Boot folder:
> +
> +.. code-block:: bash
> +
> + $ cp imx-atf/build/imx8qm/release/bl31.bin .
> + $ cp u-boot/u-boot.bin .
> +
> +Copy the following firmware to the U-Boot folder:
> +
> +.. code-block:: bash
> +
> + $ cp firmware-imx-8.0/firmware/seco/ahab-container.img .
> +
> +Build U-Boot
> +------------
> +.. code-block:: bash
> +
> + $ make apalis-imx8qm_defconfig
> + $ make u-boot-dtb.imx
> +
> +Load the U-Boot Binary Using UUU
> +--------------------------------
> +
> +Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``:
> +
> +https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
> +
> +Put the module into USB recovery aka serial downloader mode, connect USB device
> +to your host and execute uuu:
> +
> +.. code-block:: bash
> +
> + sudo ./uuu u-boot/u-boot-dtb.imx
> +
> +Flash the U-Boot Binary into the eMMC
> +-------------------------------------
> +
> +Burn the ``u-boot-dtb.imx`` binary to the primary eMMC hardware boot area
> +partition and boot:
> +
> +.. code-block:: bash
> +
> + load mmc 1:1 $loadaddr u-boot-dtb.imx
> + setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
> + mmc dev 0 1
> + mmc write ${loadaddr} 0x0 ${blkcnt}
> diff --git a/doc/board/toradex/index.rst b/doc/board/toradex/index.rst
> index 6cd2ade9f4..da65ad2408 100644
> --- a/doc/board/toradex/index.rst
> +++ b/doc/board/toradex/index.rst
> @@ -6,5 +6,6 @@ Toradex
> .. toctree::
> :maxdepth: 2
>
> + apalix-imx8
> colibri_imx7
> verdin-imx8mm
> --
> 2.17.1
>
--
Best regards
Oleksandr Suvorov
Toradex AG
Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500
4800 (main line)
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH v5 3/6] doc: board: apalis-imx8: convert readme to reST
2020-02-12 15:14 ` [PATCH v5 3/6] doc: board: apalis-imx8: " Igor Opaniuk
2020-02-12 15:46 ` Oleksandr Suvorov
@ 2020-02-20 13:35 ` Bin Meng
1 sibling, 0 replies; 19+ messages in thread
From: Bin Meng @ 2020-02-20 13:35 UTC (permalink / raw)
To: u-boot
On Wed, Feb 12, 2020 at 11:14 PM Igor Opaniuk <igor.opaniuk@gmail.com> wrote:
>
> From: Igor Opaniuk <igor.opaniuk@toradex.com>
>
> Convert README to reStructuredText format.
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
> ---
>
> board/toradex/apalis-imx8/README | 66 -------------------------
> doc/board/toradex/apalix-imx8.rst | 82 +++++++++++++++++++++++++++++++
> doc/board/toradex/index.rst | 1 +
> 3 files changed, 83 insertions(+), 66 deletions(-)
> delete mode 100644 board/toradex/apalis-imx8/README
> create mode 100644 doc/board/toradex/apalix-imx8.rst
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 4/6] doc: board: colibri-imx8x: convert readme to reST
2020-02-12 15:14 [PATCH v5 0/6] doc: board: toradex reST documentation Igor Opaniuk
` (2 preceding siblings ...)
2020-02-12 15:14 ` [PATCH v5 3/6] doc: board: apalis-imx8: " Igor Opaniuk
@ 2020-02-12 15:14 ` Igor Opaniuk
2020-02-13 10:10 ` Oleksandr Suvorov
2020-02-20 13:37 ` Bin Meng
2020-02-12 15:14 ` [PATCH v5 5/6] toradex: MAINTAINERS: entries for new reST docs Igor Opaniuk
` (2 subsequent siblings)
6 siblings, 2 replies; 19+ messages in thread
From: Igor Opaniuk @ 2020-02-12 15:14 UTC (permalink / raw)
To: u-boot
From: Igor Opaniuk <igor.opaniuk@toradex.com>
Convert README to reStructuredText format.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---
board/toradex/colibri-imx8x/README | 66 -----------------------
doc/board/toradex/colibri-imx8x.rst | 82 +++++++++++++++++++++++++++++
doc/board/toradex/index.rst | 1 +
3 files changed, 83 insertions(+), 66 deletions(-)
delete mode 100644 board/toradex/colibri-imx8x/README
create mode 100644 doc/board/toradex/colibri-imx8x.rst
diff --git a/board/toradex/colibri-imx8x/README b/board/toradex/colibri-imx8x/README
deleted file mode 100644
index 708bb3e51c..0000000000
--- a/board/toradex/colibri-imx8x/README
+++ /dev/null
@@ -1,66 +0,0 @@
-U-Boot for the Toradex Colibri iMX8QXP V1.0B Module
-
-Quick Start
-===========
-
-- Build the ARM trusted firmware binary
-- Get scfw_tcm.bin and ahab-container.img
-- Build U-Boot
-- Load U-Boot binary using uuu
-- Flash U-Boot binary into the eMMC
-- Boot
-
-Get and Build the ARM Trusted Firmware
-======================================
-
-$ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf
-$ cd imx-atf/
-$ make PLAT=imx8qxp bl31
-
-Get scfw_tcm.bin and ahab-container.img
-=======================================
-
-$ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-bsp/imx-sc-firmware/files/mx8qx-colibri-scfw-tcm.bin?raw=true
-$ mv mx8qx-colibri-scfw-tcm.bin\?raw\=true mx8qx-colibri-scfw-tcm.bin
-$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
-$ chmod +x firmware-imx-8.0.bin
-$ ./firmware-imx-8.0.bin
-
-Copy the following binaries to the U-Boot folder:
-
-$ cp imx-atf/build/imx8qxp/release/bl31.bin .
-$ cp u-boot/u-boot.bin .
-
-Copy the following firmware to the U-Boot folder:
-
-$ cp firmware-imx-8.0/firmware/seco/ahab-container.img .
-
-Build U-Boot
-============
-
-$ make colibri-imx8qxp_defconfig
-$ make u-boot-dtb.imx
-
-Load the U-Boot Binary Using UUU
-================================
-
-Get the latest version of the universal update utility (uuu) aka mfgtools 3.0:
-
-https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
-
-Put the module into USB recovery aka serial downloader mode, connect USB device
-to your host and execute uuu:
-
-sudo ./uuu u-boot/u-boot-dtb.imx
-
-Flash the U-Boot Binary into the eMMC
-=====================================
-
-Burn the u-boot-dtb.imx binary to the primary eMMC hardware boot area partition:
-
-load mmc 1:1 $loadaddr u-boot-dtb.imx
-setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
-mmc dev 0 1
-mmc write ${loadaddr} 0x0 ${blkcnt}
-
-Boot
diff --git a/doc/board/toradex/colibri-imx8x.rst b/doc/board/toradex/colibri-imx8x.rst
new file mode 100644
index 0000000000..244e5a4c04
--- /dev/null
+++ b/doc/board/toradex/colibri-imx8x.rst
@@ -0,0 +1,82 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Colibri iMX8QXP V1.0B Module
+============================
+
+Quick Start
+-----------
+
+- Build the ARM trusted firmware binary
+- Get scfw_tcm.bin and ahab-container.img
+- Build U-Boot
+- Load U-Boot binary using uuu
+- Flash U-Boot binary into the eMMC
+- Boot
+
+Get and Build the ARM Trusted Firmware
+--------------------------------------
+
+.. code-block:: bash
+
+ $ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf
+ $ cd imx-atf/
+ $ make PLAT=imx8qxp bl31
+
+Get scfw_tcm.bin and ahab-container.img
+---------------------------------------
+.. code-block:: bash
+
+ $ wget https://github.com/toradex/meta-fsl-bsp-release/blob/
+ toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-
+ bsp/imx-sc-firmware/files/mx8qx-colibri-scfw-tcm.bin?raw=true
+ $ mv mx8qx-colibri-scfw-tcm.bin\?raw\=true mx8qx-colibri-scfw-tcm.bin
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
+ $ chmod +x firmware-imx-8.0.bin
+ $ ./firmware-imx-8.0.bin
+
+Copy the following binaries to the U-Boot folder:
+
+.. code-block:: bash
+
+ $ cp imx-atf/build/imx8qxp/release/bl31.bin .
+ $ cp u-boot/u-boot.bin .
+
+Copy the following firmware to the U-Boot folder:
+
+.. code-block:: bash
+
+ $ cp firmware-imx-8.0/firmware/seco/ahab-container.img .
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+ $ make colibri-imx8qxp_defconfig
+ $ make u-boot-dtb.imx
+
+Load the U-Boot Binary Using UUU
+--------------------------------
+
+Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``:
+
+https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
+
+Put the module into USB recovery aka serial downloader mode, connect USB device
+to your host and execute ``uuu``:
+
+.. code-block:: bash
+
+ sudo ./uuu u-boot/u-boot-dtb.imx
+
+Flash the U-Boot Binary into the eMMC
+-------------------------------------
+
+Burn the ``u-boot-dtb.imx`` binary to the primary eMMC hardware boot area partition:
+
+.. code-block:: bash
+
+ load mmc 1:1 $loadaddr u-boot-dtb.imx
+ setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
+ mmc dev 0 1
+ mmc write ${loadaddr} 0x0 ${blkcnt}
diff --git a/doc/board/toradex/index.rst b/doc/board/toradex/index.rst
index da65ad2408..16b5a0770d 100644
--- a/doc/board/toradex/index.rst
+++ b/doc/board/toradex/index.rst
@@ -8,4 +8,5 @@ Toradex
apalix-imx8
colibri_imx7
+ colibri-imx8x
verdin-imx8mm
--
2.17.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v5 4/6] doc: board: colibri-imx8x: convert readme to reST
2020-02-12 15:14 ` [PATCH v5 4/6] doc: board: colibri-imx8x: " Igor Opaniuk
@ 2020-02-13 10:10 ` Oleksandr Suvorov
2020-02-20 13:37 ` Bin Meng
1 sibling, 0 replies; 19+ messages in thread
From: Oleksandr Suvorov @ 2020-02-13 10:10 UTC (permalink / raw)
To: u-boot
On Wed, Feb 12, 2020 at 5:15 PM Igor Opaniuk <igor.opaniuk@gmail.com> wrote:
>
> From: Igor Opaniuk <igor.opaniuk@toradex.com>
>
> Convert README to reStructuredText format.
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
> ---
>
> board/toradex/colibri-imx8x/README | 66 -----------------------
> doc/board/toradex/colibri-imx8x.rst | 82 +++++++++++++++++++++++++++++
> doc/board/toradex/index.rst | 1 +
> 3 files changed, 83 insertions(+), 66 deletions(-)
> delete mode 100644 board/toradex/colibri-imx8x/README
> create mode 100644 doc/board/toradex/colibri-imx8x.rst
>
> diff --git a/board/toradex/colibri-imx8x/README b/board/toradex/colibri-imx8x/README
> deleted file mode 100644
> index 708bb3e51c..0000000000
> --- a/board/toradex/colibri-imx8x/README
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -U-Boot for the Toradex Colibri iMX8QXP V1.0B Module
> -
> -Quick Start
> -===========
> -
> -- Build the ARM trusted firmware binary
> -- Get scfw_tcm.bin and ahab-container.img
> -- Build U-Boot
> -- Load U-Boot binary using uuu
> -- Flash U-Boot binary into the eMMC
> -- Boot
> -
> -Get and Build the ARM Trusted Firmware
> -======================================
> -
> -$ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf
> -$ cd imx-atf/
> -$ make PLAT=imx8qxp bl31
> -
> -Get scfw_tcm.bin and ahab-container.img
> -=======================================
> -
> -$ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-bsp/imx-sc-firmware/files/mx8qx-colibri-scfw-tcm.bin?raw=true
> -$ mv mx8qx-colibri-scfw-tcm.bin\?raw\=true mx8qx-colibri-scfw-tcm.bin
> -$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
> -$ chmod +x firmware-imx-8.0.bin
> -$ ./firmware-imx-8.0.bin
> -
> -Copy the following binaries to the U-Boot folder:
> -
> -$ cp imx-atf/build/imx8qxp/release/bl31.bin .
> -$ cp u-boot/u-boot.bin .
> -
> -Copy the following firmware to the U-Boot folder:
> -
> -$ cp firmware-imx-8.0/firmware/seco/ahab-container.img .
> -
> -Build U-Boot
> -============
> -
> -$ make colibri-imx8qxp_defconfig
> -$ make u-boot-dtb.imx
> -
> -Load the U-Boot Binary Using UUU
> -================================
> -
> -Get the latest version of the universal update utility (uuu) aka mfgtools 3.0:
> -
> -https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
> -
> -Put the module into USB recovery aka serial downloader mode, connect USB device
> -to your host and execute uuu:
> -
> -sudo ./uuu u-boot/u-boot-dtb.imx
> -
> -Flash the U-Boot Binary into the eMMC
> -=====================================
> -
> -Burn the u-boot-dtb.imx binary to the primary eMMC hardware boot area partition:
> -
> -load mmc 1:1 $loadaddr u-boot-dtb.imx
> -setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
> -mmc dev 0 1
> -mmc write ${loadaddr} 0x0 ${blkcnt}
> -
> -Boot
> diff --git a/doc/board/toradex/colibri-imx8x.rst b/doc/board/toradex/colibri-imx8x.rst
> new file mode 100644
> index 0000000000..244e5a4c04
> --- /dev/null
> +++ b/doc/board/toradex/colibri-imx8x.rst
> @@ -0,0 +1,82 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +Colibri iMX8QXP V1.0B Module
> +============================
> +
> +Quick Start
> +-----------
> +
> +- Build the ARM trusted firmware binary
> +- Get scfw_tcm.bin and ahab-container.img
> +- Build U-Boot
> +- Load U-Boot binary using uuu
> +- Flash U-Boot binary into the eMMC
> +- Boot
> +
> +Get and Build the ARM Trusted Firmware
> +--------------------------------------
> +
> +.. code-block:: bash
> +
> + $ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf
> + $ cd imx-atf/
> + $ make PLAT=imx8qxp bl31
> +
> +Get scfw_tcm.bin and ahab-container.img
> +---------------------------------------
> +.. code-block:: bash
> +
> + $ wget https://github.com/toradex/meta-fsl-bsp-release/blob/
> + toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-
> + bsp/imx-sc-firmware/files/mx8qx-colibri-scfw-tcm.bin?raw=true
> + $ mv mx8qx-colibri-scfw-tcm.bin\?raw\=true mx8qx-colibri-scfw-tcm.bin
> + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
> + $ chmod +x firmware-imx-8.0.bin
> + $ ./firmware-imx-8.0.bin
> +
> +Copy the following binaries to the U-Boot folder:
> +
> +.. code-block:: bash
> +
> + $ cp imx-atf/build/imx8qxp/release/bl31.bin .
> + $ cp u-boot/u-boot.bin .
> +
> +Copy the following firmware to the U-Boot folder:
> +
> +.. code-block:: bash
> +
> + $ cp firmware-imx-8.0/firmware/seco/ahab-container.img .
> +
> +Build U-Boot
> +------------
> +
> +.. code-block:: bash
> +
> + $ make colibri-imx8qxp_defconfig
> + $ make u-boot-dtb.imx
> +
> +Load the U-Boot Binary Using UUU
> +--------------------------------
> +
> +Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``:
> +
> +https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
> +
> +Put the module into USB recovery aka serial downloader mode, connect USB device
> +to your host and execute ``uuu``:
> +
> +.. code-block:: bash
> +
> + sudo ./uuu u-boot/u-boot-dtb.imx
> +
> +Flash the U-Boot Binary into the eMMC
> +-------------------------------------
> +
> +Burn the ``u-boot-dtb.imx`` binary to the primary eMMC hardware boot area partition:
> +
> +.. code-block:: bash
> +
> + load mmc 1:1 $loadaddr u-boot-dtb.imx
> + setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
> + mmc dev 0 1
> + mmc write ${loadaddr} 0x0 ${blkcnt}
> diff --git a/doc/board/toradex/index.rst b/doc/board/toradex/index.rst
> index da65ad2408..16b5a0770d 100644
> --- a/doc/board/toradex/index.rst
> +++ b/doc/board/toradex/index.rst
> @@ -8,4 +8,5 @@ Toradex
>
> apalix-imx8
> colibri_imx7
> + colibri-imx8x
> verdin-imx8mm
> --
> 2.17.1
>
--
Best regards
Oleksandr Suvorov
Toradex AG
Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500
4800 (main line)
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH v5 4/6] doc: board: colibri-imx8x: convert readme to reST
2020-02-12 15:14 ` [PATCH v5 4/6] doc: board: colibri-imx8x: " Igor Opaniuk
2020-02-13 10:10 ` Oleksandr Suvorov
@ 2020-02-20 13:37 ` Bin Meng
1 sibling, 0 replies; 19+ messages in thread
From: Bin Meng @ 2020-02-20 13:37 UTC (permalink / raw)
To: u-boot
On Wed, Feb 12, 2020 at 11:14 PM Igor Opaniuk <igor.opaniuk@gmail.com> wrote:
>
> From: Igor Opaniuk <igor.opaniuk@toradex.com>
>
> Convert README to reStructuredText format.
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
> ---
>
> board/toradex/colibri-imx8x/README | 66 -----------------------
> doc/board/toradex/colibri-imx8x.rst | 82 +++++++++++++++++++++++++++++
> doc/board/toradex/index.rst | 1 +
> 3 files changed, 83 insertions(+), 66 deletions(-)
> delete mode 100644 board/toradex/colibri-imx8x/README
> create mode 100644 doc/board/toradex/colibri-imx8x.rst
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 5/6] toradex: MAINTAINERS: entries for new reST docs
2020-02-12 15:14 [PATCH v5 0/6] doc: board: toradex reST documentation Igor Opaniuk
` (3 preceding siblings ...)
2020-02-12 15:14 ` [PATCH v5 4/6] doc: board: colibri-imx8x: " Igor Opaniuk
@ 2020-02-12 15:14 ` Igor Opaniuk
2020-02-20 13:19 ` Bin Meng
2020-02-12 15:14 ` [PATCH v5 6/6] doc: board: add rockchip subfolder Igor Opaniuk
2020-02-20 13:39 ` [PATCH v5 0/6] doc: board: toradex reST documentation Bin Meng
6 siblings, 1 reply; 19+ messages in thread
From: Igor Opaniuk @ 2020-02-12 15:14 UTC (permalink / raw)
To: u-boot
From: Igor Opaniuk <igor.opaniuk@toradex.com>
Add entries for the newly created documentation files in reST
format.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---
board/toradex/apalis-imx8/MAINTAINERS | 1 +
board/toradex/colibri-imx8x/MAINTAINERS | 1 +
board/toradex/colibri_imx7/MAINTAINERS | 1 +
board/toradex/verdin-imx8mm/MAINTAINERS | 1 +
4 files changed, 4 insertions(+)
diff --git a/board/toradex/apalis-imx8/MAINTAINERS b/board/toradex/apalis-imx8/MAINTAINERS
index c9ac58b47b..feacf7eded 100644
--- a/board/toradex/apalis-imx8/MAINTAINERS
+++ b/board/toradex/apalis-imx8/MAINTAINERS
@@ -6,4 +6,5 @@ F: arch/arm/dts/fsl-imx8-apalis.dts
F: arch/arm/dts/fsl-imx8-apalis-u-boot.dtsi
F: board/toradex/apalis-imx8/
F: configs/apalis-imx8qm_defconfig
+F: doc/board/toradex/apalix-imx8.rst
F: include/configs/apalis-imx8.h
diff --git a/board/toradex/colibri-imx8x/MAINTAINERS b/board/toradex/colibri-imx8x/MAINTAINERS
index e91b9975c2..f6853586c8 100644
--- a/board/toradex/colibri-imx8x/MAINTAINERS
+++ b/board/toradex/colibri-imx8x/MAINTAINERS
@@ -6,4 +6,5 @@ F: arch/arm/dts/fsl-imx8x-colibri.dts
F: arch/arm/dts/fsl-imx8x-colibri-u-boot.dtsi
F: board/toradex/colibri-imx8x/
F: configs/colibri-imx8qxp_defconfig
+F: doc/board/toradex/colibri-imx8x.rst
F: include/configs/colibri-imx8x.h
diff --git a/board/toradex/colibri_imx7/MAINTAINERS b/board/toradex/colibri_imx7/MAINTAINERS
index 178dece797..82246be160 100644
--- a/board/toradex/colibri_imx7/MAINTAINERS
+++ b/board/toradex/colibri_imx7/MAINTAINERS
@@ -4,6 +4,7 @@ W: http://developer.toradex.com/software/linux/linux-software
W: https://www.toradex.com/community
S: Maintained
F: board/toradex/colibri_imx7/
+F: doc/board/toradex/colibri_imx7.rst
F: include/configs/colibri_imx7.h
F: configs/colibri_imx7_defconfig
F: configs/colibri_imx7_emmc_defconfig
diff --git a/board/toradex/verdin-imx8mm/MAINTAINERS b/board/toradex/verdin-imx8mm/MAINTAINERS
index 3b4fae5c66..2495696e9d 100644
--- a/board/toradex/verdin-imx8mm/MAINTAINERS
+++ b/board/toradex/verdin-imx8mm/MAINTAINERS
@@ -6,4 +6,5 @@ F: arch/arm/dts/imx8mm-verdin.dts
F: arch/arm/dts/imx8mm-verdin-u-boot.dtsi
F: board/toradex/verdin-imx8mm/
F: configs/verdin-imx8mm_defconfig
+F: doc/board/toradex/verdin-imx8mm.rst
F: include/configs/verdin-imx8mm.h
--
2.17.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v5 5/6] toradex: MAINTAINERS: entries for new reST docs
2020-02-12 15:14 ` [PATCH v5 5/6] toradex: MAINTAINERS: entries for new reST docs Igor Opaniuk
@ 2020-02-20 13:19 ` Bin Meng
0 siblings, 0 replies; 19+ messages in thread
From: Bin Meng @ 2020-02-20 13:19 UTC (permalink / raw)
To: u-boot
On Wed, Feb 12, 2020 at 11:14 PM Igor Opaniuk <igor.opaniuk@gmail.com> wrote:
>
> From: Igor Opaniuk <igor.opaniuk@toradex.com>
>
> Add entries for the newly created documentation files in reST
> format.
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
> ---
>
> board/toradex/apalis-imx8/MAINTAINERS | 1 +
> board/toradex/colibri-imx8x/MAINTAINERS | 1 +
> board/toradex/colibri_imx7/MAINTAINERS | 1 +
> board/toradex/verdin-imx8mm/MAINTAINERS | 1 +
> 4 files changed, 4 insertions(+)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 6/6] doc: board: add rockchip subfolder
2020-02-12 15:14 [PATCH v5 0/6] doc: board: toradex reST documentation Igor Opaniuk
` (4 preceding siblings ...)
2020-02-12 15:14 ` [PATCH v5 5/6] toradex: MAINTAINERS: entries for new reST docs Igor Opaniuk
@ 2020-02-12 15:14 ` Igor Opaniuk
2020-02-12 15:48 ` Oleksandr Suvorov
2020-02-20 13:14 ` Bin Meng
2020-02-20 13:39 ` [PATCH v5 0/6] doc: board: toradex reST documentation Bin Meng
6 siblings, 2 replies; 19+ messages in thread
From: Igor Opaniuk @ 2020-02-12 15:14 UTC (permalink / raw)
To: u-boot
From: Igor Opaniuk <igor.opaniuk@toradex.com>
This fixes a warning when invoking make htmldocs:
checking consistency...
doc/board/rockchip/index.rst: WARNING: document isn't included in any toctree
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
---
doc/board/index.rst | 1 +
1 file changed, 1 insertion(+)
diff --git a/doc/board/index.rst b/doc/board/index.rst
index f2f5907b8c..f061e8ecfc 100644
--- a/doc/board/index.rst
+++ b/doc/board/index.rst
@@ -14,6 +14,7 @@ Board-specific doc
google/index
intel/index
renesas/index
+ rockchip/index
sifive/index
toradex/index
xilinx/index
--
2.17.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v5 6/6] doc: board: add rockchip subfolder
2020-02-12 15:14 ` [PATCH v5 6/6] doc: board: add rockchip subfolder Igor Opaniuk
@ 2020-02-12 15:48 ` Oleksandr Suvorov
2020-02-20 13:14 ` Bin Meng
1 sibling, 0 replies; 19+ messages in thread
From: Oleksandr Suvorov @ 2020-02-12 15:48 UTC (permalink / raw)
To: u-boot
On Wed, Feb 12, 2020 at 5:15 PM Igor Opaniuk <igor.opaniuk@gmail.com> wrote:
>
> From: Igor Opaniuk <igor.opaniuk@toradex.com>
>
> This fixes a warning when invoking make htmldocs:
> checking consistency...
> doc/board/rockchip/index.rst: WARNING: document isn't included in any toctree
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
> ---
>
> doc/board/index.rst | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/doc/board/index.rst b/doc/board/index.rst
> index f2f5907b8c..f061e8ecfc 100644
> --- a/doc/board/index.rst
> +++ b/doc/board/index.rst
> @@ -14,6 +14,7 @@ Board-specific doc
> google/index
> intel/index
> renesas/index
> + rockchip/index
> sifive/index
> toradex/index
> xilinx/index
> --
> 2.17.1
>
--
Best regards
Oleksandr Suvorov
Toradex AG
Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500
4800 (main line)
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 6/6] doc: board: add rockchip subfolder
2020-02-12 15:14 ` [PATCH v5 6/6] doc: board: add rockchip subfolder Igor Opaniuk
2020-02-12 15:48 ` Oleksandr Suvorov
@ 2020-02-20 13:14 ` Bin Meng
1 sibling, 0 replies; 19+ messages in thread
From: Bin Meng @ 2020-02-20 13:14 UTC (permalink / raw)
To: u-boot
On Wed, Feb 12, 2020 at 11:14 PM Igor Opaniuk <igor.opaniuk@gmail.com> wrote:
>
> From: Igor Opaniuk <igor.opaniuk@toradex.com>
>
> This fixes a warning when invoking make htmldocs:
> checking consistency...
> doc/board/rockchip/index.rst: WARNING: document isn't included in any toctree
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
> ---
>
> doc/board/index.rst | 1 +
> 1 file changed, 1 insertion(+)
>
This patch does not apply as there is one already in the mainline.
Heinrich did the same below, but not sure how he gave a RB tag to this
one as well :)
Will drop this patch.
commit 7d92204bc0eb0a775810f887838a93a218a22f96
Author: Heinrich Schuchardt <xypron.glpk@gmx.de>
Date: Fri Feb 7 21:25:09 2020 +0100
doc: board: add Rockchip to doc/board/index.rst
Fix a build error
Regards,
Bin
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 0/6] doc: board: toradex reST documentation
2020-02-12 15:14 [PATCH v5 0/6] doc: board: toradex reST documentation Igor Opaniuk
` (5 preceding siblings ...)
2020-02-12 15:14 ` [PATCH v5 6/6] doc: board: add rockchip subfolder Igor Opaniuk
@ 2020-02-20 13:39 ` Bin Meng
6 siblings, 0 replies; 19+ messages in thread
From: Bin Meng @ 2020-02-20 13:39 UTC (permalink / raw)
To: u-boot
On Wed, Feb 12, 2020 at 11:14 PM Igor Opaniuk <igor.opaniuk@gmail.com> wrote:
>
> This patch-series adds/converts existing README files for Toradex modules
> to reStructureFormat.
>
> To verify please run:
> $ make htmldocs
>
> v5:
> - Fixed markup for headers [Bin Meng]
> - Applied R-b tag for colibri_imx7.rst [Bin Beng]
>
This was assigned to me on patchwork, so
series applied to u-boot-x86, thanks!
^ permalink raw reply [flat|nested] 19+ messages in thread