From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Mon, 17 Feb 2020 10:13:46 -0500 Subject: use invd instead of wbinvd in real mode start code In-Reply-To: <20200217150929.95930240036@gemini.denx.de> References: <20200217150929.95930240036@gemini.denx.de> Message-ID: <20200217151346.GI18302@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Feb 17, 2020 at 04:09:29PM +0100, Wolfgang Denk wrote: > Dear Andy, > > In message you wrote: > > > > > > git bisect is the usual way to figure out the culprit. > > > > > > Too much work to do this way. > > If you find bisecting is too much work you probably still do it > manually. Why don't you use tbot to automize such boring and time > consuming tasks? The problem with bisect'ing problems like these is always "how do I wire up updating the board" and not so much "how do I bisect it quickly". If you can update the board automatically you can let 'git bisect run' go off on the problem with a simple script that updates + runs our test.py code and just the version check test. That's what I do anyhow :) While I think the programmer I have for my minnowboard could be wired up in such a way, I have not due to general fear of wearing out the SPI. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: