U-Boot Logo showing incorrect colors with eLCDIF

U-Boot Logo showing incorrect colors with eLCDIF

[Fabio Estevam]

Hi,

We are converting imx7d-sdb and imx6sx-sdb boards to DM_VIDEO, but we
are seeing the Freescale logo with incorrect colors (white area is
being shown blue, for example).

imx6ul-evk has already been converted to DM_VIDEO and also show the
incorrect colors.

We haven't started to investigate this issue yet, but just wanted to
report in case this is a known issue.

Does U-Boot logo appear with the correct color on your boards with
eLCDIF controller?

Thanks,

Fabio Estevam

U-Boot Logo showing incorrect colors with eLCDIF

[Anatolij Gustschin]

Hi Fabio,

On Thu, 23 Jan 2020 10:19:08 -0300
Fabio Estevam festevam at gmail.com wrote:
...
> We are converting imx7d-sdb and imx6sx-sdb boards to DM_VIDEO, but we
> are seeing the Freescale logo with incorrect colors (white area is
> being shown blue, for example).
> 
> imx6ul-evk has already been converted to DM_VIDEO and also show the
> incorrect colors.
> 
> We haven't started to investigate this issue yet, but just wanted to
> report in case this is a known issue.

Do you have 'bits-per-pixel' property in your display node in DT?
Is suitable CONFIG_VIDEO_BPPxx option enabled in your board_defconfig ?

Maybe the video uclass code doesn't have correct code four your
bits-per-pixel configuration. Please also try with this patch [1]
applied.
 
> Does U-Boot logo appear with the correct color on your boards with
> eLCDIF controller?

I do not have a board with eLCDIF, so cannot say for sure.

Thanks,
Anatolij

[1] https://gitlab.denx.de/u-boot/custodians/u-boot-video/commit/9a9cf3198e607497a4a900e13930a836e16611f9

U-Boot Logo showing incorrect colors with eLCDIF

[Fabio Estevam]

Hi Anatolij,

On Thu, Jan 23, 2020 at 11:36 AM Anatolij Gustschin <agust@denx.de> wrote:

> Do you have 'bits-per-pixel' property in your display node in DT?
> Is suitable CONFIG_VIDEO_BPPxx option enabled in your board_defconfig ?

Yes, I have it, but it has the wrong value. It should be 24bpp instead of 16bpp.

I did the following change:

--- a/arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi
@@ -4,7 +4,6 @@
  */

        display0: display at 0 {
-               bits-per-pixel = <16>;
+               bits-per-pixel = <24>;
                bus-width = <24>;

                display-timings {

And now I see the U-Boot strings showing with a correct white color.

However, the logo does not print and I have the following error:

Error: 32 bit/pixel mode, but BMP has 8 bit/pixel

How can I fix this mismatch?

Thanks

U-Boot Logo showing incorrect colors with eLCDIF

[Anatolij Gustschin]

Hi Fabio,

On Fri, 24 Jan 2020 16:26:26 -0300
Fabio Estevam festevam at gmail.com wrote:

> > Do you have 'bits-per-pixel' property in your display node in DT?
> > Is suitable CONFIG_VIDEO_BPPxx option enabled in your board_defconfig ?  
> 
> Yes, I have it, but it has the wrong value. It should be 24bpp instead of 16bpp.
> 
> I did the following change:
> 
> --- a/arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi
> +++ b/arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi
> @@ -4,7 +4,6 @@
>   */
> 
>         display0: display at 0 {
> -               bits-per-pixel = <16>;
> +               bits-per-pixel = <24>;
>                 bus-width = <24>;
> 
>                 display-timings {
> 
> And now I see the U-Boot strings showing with a correct white color.
> 
> However, the logo does not print and I have the following error:
> 
> Error: 32 bit/pixel mode, but BMP has 8 bit/pixel
> 
> How can I fix this mismatch?

Now I see that bitmap rendering code for video-uclass driver
doesn't support displaying 8bpp bitmaps on 24bpp frame buffer.

Before DM_VIDEO conversion cfb_console driver was used and
it supports such rendering. I'm working on a fix for this.
Thanks for testing!

--
Anatolij

U-Boot Logo showing incorrect colors with eLCDIF

[Fabio Estevam]

Hi Anatolij,

On Sat, Jan 25, 2020 at 3:36 PM Anatolij Gustschin <agust@denx.de> wrote:

> Now I see that bitmap rendering code for video-uclass driver
> doesn't support displaying 8bpp bitmaps on 24bpp frame buffer.
>
> Before DM_VIDEO conversion cfb_console driver was used and
> it supports such rendering. I'm working on a fix for this.
> Thanks for testing!

Excellent, I will be glad to test it when you have it ready.

I think this is the last remaining issue with mxsfb DM_VIDEO conversion.

Thanks!

U-Boot Logo showing incorrect colors with eLCDIF

[Fabio Estevam]

Hi Anatolij,

On Sat, Jan 25, 2020 at 3:36 PM Anatolij Gustschin <agust@denx.de> wrote:

> Before DM_VIDEO conversion cfb_console driver was used and
> it supports such rendering. I'm working on a fix for this.
> Thanks for testing!

Have you been able to fix this?

Thanks

U-Boot Logo showing incorrect colors with eLCDIF

[Anatolij Gustschin]

Hi Fabio,

On Mon, 3 Feb 2020 12:15:09 -0300
Fabio Estevam festevam at gmail.com wrote:

> Hi Anatolij,
> 
> On Sat, Jan 25, 2020 at 3:36 PM Anatolij Gustschin <agust@denx.de> wrote:
> 
> > Before DM_VIDEO conversion cfb_console driver was used and
> > it supports such rendering. I'm working on a fix for this.
> > Thanks for testing!  
> 
> Have you been able to fix this?

I tried to extend the BMP code to fix this, but my testing with
sandbox SDL end of last week has shown incorrect colors in 24bpp
mode, and I didn't find the reason for it. I do not see what is
wrong in the code, maybe there is some issue with sandbox SDL.
So I've submitted some patches [1], [2], [3]. Could you please
test them on mx6ul-14x14-evk ? Thanks!

[1] http://patchwork.ozlabs.org/patch/1233910
[2] http://patchwork.ozlabs.org/patch/1233911
[3] http://patchwork.ozlabs.org/patch/1233912

--
Anatolij

U-Boot Logo showing incorrect colors with eLCDIF

[Fabio Estevam]

Hi Anatolij,

On Wed, Feb 5, 2020 at 2:00 PM Anatolij Gustschin <agust@denx.de> wrote:

> I tried to extend the BMP code to fix this, but my testing with
> sandbox SDL end of last week has shown incorrect colors in 24bpp
> mode, and I didn't find the reason for it. I do not see what is
> wrong in the code, maybe there is some issue with sandbox SDL.
> So I've submitted some patches [1], [2], [3]. Could you please
> test them on mx6ul-14x14-evk ? Thanks!

Thanks for the patches.

I can see the logo colors correctly now, but there is some breakage now.

Please see the result at:
https://ibb.co/0YKwTxJ

Thanks!

U-Boot Logo showing incorrect colors with eLCDIF

[Fabio Estevam]

Hi Anatolij,

On Wed, Feb 5, 2020 at 2:45 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Anatolij,
>
> On Wed, Feb 5, 2020 at 2:00 PM Anatolij Gustschin <agust@denx.de> wrote:
>
> > I tried to extend the BMP code to fix this, but my testing with
> > sandbox SDL end of last week has shown incorrect colors in 24bpp
> > mode, and I didn't find the reason for it. I do not see what is
> > wrong in the code, maybe there is some issue with sandbox SDL.
> > So I've submitted some patches [1], [2], [3]. Could you please
> > test them on mx6ul-14x14-evk ? Thanks!
>
> Thanks for the patches.
>
> I can see the logo colors correctly now, but there is some breakage now.
>
> Please see the result at:
> https://ibb.co/0YKwTxJ

Would you have a fix for this?

Thanks

U-Boot Logo showing incorrect colors with eLCDIF

[Anatolij Gustschin]

Hi Fabio,

On Mon, 24 Feb 2020 09:38:04 -0300
Fabio Estevam festevam at gmail.com wrote:

> Hi Anatolij,
> 
> On Wed, Feb 5, 2020 at 2:45 PM Fabio Estevam <festevam@gmail.com> wrote:
> >
> > Hi Anatolij,
> >
> > On Wed, Feb 5, 2020 at 2:00 PM Anatolij Gustschin <agust@denx.de> wrote:
> >  
> > > I tried to extend the BMP code to fix this, but my testing with
> > > sandbox SDL end of last week has shown incorrect colors in 24bpp
> > > mode, and I didn't find the reason for it. I do not see what is
> > > wrong in the code, maybe there is some issue with sandbox SDL.
> > > So I've submitted some patches [1], [2], [3]. Could you please
> > > test them on mx6ul-14x14-evk ? Thanks!  
> >
> > Thanks for the patches.
> >
> > I can see the logo colors correctly now, but there is some breakage now.
> >
> > Please see the result at:
> > https://ibb.co/0YKwTxJ  
> 
> Would you have a fix for this?

it seems this is not video driver related, I didn't find a solution
for this yet. First I guessed that this could be caused by removed
lcd pads init in board code, but this is not the case. I tried to
bisect but it is pretty difficult since the older released U-Boot
versions do not boot on this board. I didn't have enough time to
finish this, sorry. I hope we still can address this before release.

--
Anatolij

U-Boot Logo showing incorrect colors with eLCDIF

[Anatolij Gustschin]

Hi Fabio,

On Mon, 24 Feb 2020 09:38:04 -0300
Fabio Estevam festevam at gmail.com wrote:

> Hi Anatolij,
> 
> On Wed, Feb 5, 2020 at 2:45 PM Fabio Estevam <festevam@gmail.com> wrote:
> >
> > Hi Anatolij,
> >
> > On Wed, Feb 5, 2020 at 2:00 PM Anatolij Gustschin <agust@denx.de> wrote:
> >  
> > > I tried to extend the BMP code to fix this, but my testing with
> > > sandbox SDL end of last week has shown incorrect colors in 24bpp
> > > mode, and I didn't find the reason for it. I do not see what is
> > > wrong in the code, maybe there is some issue with sandbox SDL.
> > > So I've submitted some patches [1], [2], [3]. Could you please
> > > test them on mx6ul-14x14-evk ? Thanks!  
> >
> > Thanks for the patches.
> >
> > I can see the logo colors correctly now, but there is some breakage now.
> >
> > Please see the result at:
> > https://ibb.co/0YKwTxJ  
> 
> Would you have a fix for this?

I've tested on mx6ul-14x14-evk, with current U-Boot master I do not
see this problem any more.

--
Anatolij

U-Boot Logo showing incorrect colors with eLCDIF

[Fabio Estevam]

Hi Anatolij,

On Mon, Jun 29, 2020 at 4:31 AM Anatolij Gustschin <agust@denx.de> wrote:

> I've tested on mx6ul-14x14-evk, with current U-Boot master I do not
> see this problem any more.

Excellent! I saw Ye Li's patches that fixed the problem.

Thanks

U-Boot Logo showing incorrect colors with eLCDIF

[Oleksandr Suvorov]

Hi Fabio,

On Thu, Jan 23, 2020 at 3:19 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi,
>
> We are converting imx7d-sdb and imx6sx-sdb boards to DM_VIDEO, but we
> are seeing the Freescale logo with incorrect colors (white area is
> being shown blue, for example).
>
We had a similar issue when mxsfb driver tried to use 18-bit elcdif
bus in 24-bit mode.

> imx6ul-evk has already been converted to DM_VIDEO and also show the
> incorrect colors.
>
> We haven't started to investigate this issue yet, but just wanted to
> report in case this is a known issue.
>
> Does U-Boot logo appear with the correct color on your boards with
> eLCDIF controller?
>
> Thanks,
>
> Fabio Estevam



-- 
Best regards

Oleksandr Suvorov
cryosay at gmail.com

U-Boot Logo showing incorrect colors with eLCDIF

[Fabio Estevam]

Hi Oleksandr,

On Thu, Jan 23, 2020 at 12:46 PM Oleksandr Suvorov <cryosay@gmail.com> wrote:

> We had a similar issue when mxsfb driver tried to use 18-bit elcdif
> bus in 24-bit mode.

Is there a patch to fix this problem?

Does U-Boot logo appear correctly in colibri_imx7 and colibri_imx6ull?

Thanks