From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [PATCH 6/7] scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc
Date: Mon, 24 Feb 2020 13:05:40 -0500 [thread overview]
Message-ID: <20200224180541.3654-6-trini@konsulko.com> (raw)
In-Reply-To: <20200224180541.3654-1-trini@konsulko.com>
From: Rob Herring <robh@kernel.org>
This adds the following commits from upstream:
84e414b0b5bc tests: Add a test case for the omit-if-no-ref keyword
4038fd90056e dtc: add ability to make nodes conditional on them being referenced
e1f139ea4900 checks: drop warning for missing PCI bridge bus-range
f4eba68d89ee checks: Print duplicate node name instead of parent name
46df1fb1b211 .travis.yml: Run valgrind checks via Travis
14a3002a1aee tests: Update valgrind suppressions for sw_tree1
02c5fe9debc0 tests: Remove valgrind error from tests/get_path
df536831d02c checks: add graph binding checks
2347c96edcbe checks: add a check for duplicate unit-addresses of child nodes
8f1b35f88395 Correct overlay syntactic sugar for generating target-path fragments
afbddcd418fb Suppress warnings on overlay fragments
119e27300359 Improve tests for dtc overlay generation
[From Linux Kernel commit 50aafd60898a8b3edf2f60e014a8288da3b2e5e3]
Signed-off-by: Rob Herring <robh@kernel.org>
[For applying to U-Boot]
Signed-off-by: Tom Rini <trini@konsulko.com>
---
scripts/dtc/checks.c | 186 +++++++++++++++++++++++++++++++++++++-
scripts/dtc/dtc-parser.y | 22 ++---
scripts/dtc/livetree.c | 12 ++-
scripts/dtc/version_gen.h | 2 +-
4 files changed, 206 insertions(+), 16 deletions(-)
diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c
index 40879677c8c3..c35aa6f88639 100644
--- a/scripts/dtc/checks.c
+++ b/scripts/dtc/checks.c
@@ -255,7 +255,7 @@ static void check_duplicate_node_names(struct check *c, struct dt_info *dti,
child2;
child2 = child2->next_sibling)
if (streq(child->name, child2->name))
- FAIL(c, dti, node, "Duplicate node name");
+ FAIL(c, dti, child2, "Duplicate node name");
}
ERROR(duplicate_node_names, check_duplicate_node_names, NULL);
@@ -317,6 +317,11 @@ static void check_unit_address_vs_reg(struct check *c, struct dt_info *dti,
const char *unitname = get_unitname(node);
struct property *prop = get_property(node, "reg");
+ if (get_subnode(node, "__overlay__")) {
+ /* HACK: Overlay fragments are a special case */
+ return;
+ }
+
if (!prop) {
prop = get_property(node, "ranges");
if (prop && !prop->val.len)
@@ -1030,6 +1035,36 @@ static void check_avoid_unnecessary_addr_size(struct check *c, struct dt_info *d
}
WARNING(avoid_unnecessary_addr_size, check_avoid_unnecessary_addr_size, NULL, &avoid_default_addr_size);
+static void check_unique_unit_address(struct check *c, struct dt_info *dti,
+ struct node *node)
+{
+ struct node *childa;
+
+ if (node->addr_cells < 0 || node->size_cells < 0)
+ return;
+
+ if (!node->children)
+ return;
+
+ for_each_child(node, childa) {
+ struct node *childb;
+ const char *addr_a = get_unitname(childa);
+
+ if (!strlen(addr_a))
+ continue;
+
+ for_each_child(node, childb) {
+ const char *addr_b = get_unitname(childb);
+ if (childa == childb)
+ break;
+
+ if (streq(addr_a, addr_b))
+ FAIL(c, dti, childb, "duplicate unit-address (also used in node %s)", childa->fullpath);
+ }
+ }
+}
+WARNING(unique_unit_address, check_unique_unit_address, NULL, &avoid_default_addr_size);
+
static void check_obsolete_chosen_interrupt_controller(struct check *c,
struct dt_info *dti,
struct node *node)
@@ -1370,6 +1405,152 @@ static void check_interrupts_property(struct check *c,
}
WARNING(interrupts_property, check_interrupts_property, &phandle_references);
+static const struct bus_type graph_port_bus = {
+ .name = "graph-port",
+};
+
+static const struct bus_type graph_ports_bus = {
+ .name = "graph-ports",
+};
+
+static void check_graph_nodes(struct check *c, struct dt_info *dti,
+ struct node *node)
+{
+ struct node *child;
+
+ for_each_child(node, child) {
+ if (!(strprefixeq(child->name, child->basenamelen, "endpoint") ||
+ get_property(child, "remote-endpoint")))
+ continue;
+
+ node->bus = &graph_port_bus;
+
+ /* The parent of 'port' nodes can be either 'ports' or a device */
+ if (!node->parent->bus &&
+ (streq(node->parent->name, "ports") || get_property(node, "reg")))
+ node->parent->bus = &graph_ports_bus;
+
+ break;
+ }
+
+}
+WARNING(graph_nodes, check_graph_nodes, NULL);
+
+static void check_graph_child_address(struct check *c, struct dt_info *dti,
+ struct node *node)
+{
+ int cnt = 0;
+ struct node *child;
+
+ if (node->bus != &graph_ports_bus && node->bus != &graph_port_bus)
+ return;
+
+ for_each_child(node, child) {
+ struct property *prop = get_property(child, "reg");
+
+ /* No error if we have any non-zero unit address */
+ if (prop && propval_cell(prop) != 0)
+ return;
+
+ cnt++;
+ }
+
+ if (cnt == 1 && node->addr_cells != -1)
+ FAIL(c, dti, node, "graph node has single child node '%s', #address-cells/#size-cells are not necessary",
+ node->children->name);
+}
+WARNING(graph_child_address, check_graph_child_address, NULL, &graph_nodes);
+
+static void check_graph_reg(struct check *c, struct dt_info *dti,
+ struct node *node)
+{
+ char unit_addr[9];
+ const char *unitname = get_unitname(node);
+ struct property *prop;
+
+ prop = get_property(node, "reg");
+ if (!prop || !unitname)
+ return;
+
+ if (!(prop->val.val && prop->val.len == sizeof(cell_t))) {
+ FAIL(c, dti, node, "graph node malformed 'reg' property");
+ return;
+ }
+
+ snprintf(unit_addr, sizeof(unit_addr), "%x", propval_cell(prop));
+ if (!streq(unitname, unit_addr))
+ FAIL(c, dti, node, "graph node unit address error, expected \"%s\"",
+ unit_addr);
+
+ if (node->parent->addr_cells != 1)
+ FAIL_PROP(c, dti, node, get_property(node, "#address-cells"),
+ "graph node '#address-cells' is %d, must be 1",
+ node->parent->addr_cells);
+ if (node->parent->size_cells != 0)
+ FAIL_PROP(c, dti, node, get_property(node, "#size-cells"),
+ "graph node '#size-cells' is %d, must be 0",
+ node->parent->size_cells);
+}
+
+static void check_graph_port(struct check *c, struct dt_info *dti,
+ struct node *node)
+{
+ if (node->bus != &graph_port_bus)
+ return;
+
+ if (!strprefixeq(node->name, node->basenamelen, "port"))
+ FAIL(c, dti, node, "graph port node name should be 'port'");
+
+ check_graph_reg(c, dti, node);
+}
+WARNING(graph_port, check_graph_port, NULL, &graph_nodes);
+
+static struct node *get_remote_endpoint(struct check *c, struct dt_info *dti,
+ struct node *endpoint)
+{
+ int phandle;
+ struct node *node;
+ struct property *prop;
+
+ prop = get_property(endpoint, "remote-endpoint");
+ if (!prop)
+ return NULL;
+
+ phandle = propval_cell(prop);
+ /* Give up if this is an overlay with external references */
+ if (phandle == 0 || phandle == -1)
+ return NULL;
+
+ node = get_node_by_phandle(dti->dt, phandle);
+ if (!node)
+ FAIL_PROP(c, dti, endpoint, prop, "graph phandle is not valid");
+
+ return node;
+}
+
+static void check_graph_endpoint(struct check *c, struct dt_info *dti,
+ struct node *node)
+{
+ struct node *remote_node;
+
+ if (!node->parent || node->parent->bus != &graph_port_bus)
+ return;
+
+ if (!strprefixeq(node->name, node->basenamelen, "endpoint"))
+ FAIL(c, dti, node, "graph endpont node name should be 'endpoint'");
+
+ check_graph_reg(c, dti, node);
+
+ remote_node = get_remote_endpoint(c, dti, node);
+ if (!remote_node)
+ return;
+
+ if (get_remote_endpoint(c, dti, remote_node) != node)
+ FAIL(c, dti, node, "graph connection to node '%s' is not bidirectional",
+ remote_node->fullpath);
+}
+WARNING(graph_endpoint, check_graph_endpoint, NULL, &graph_nodes);
+
static struct check *check_table[] = {
&duplicate_node_names, &duplicate_property_names,
&node_name_chars, &node_name_format, &property_name_chars,
@@ -1404,6 +1585,7 @@ static struct check *check_table[] = {
&avoid_default_addr_size,
&avoid_unnecessary_addr_size,
+ &unique_unit_address,
&obsolete_chosen_interrupt_controller,
&chosen_node_is_root, &chosen_node_bootargs, &chosen_node_stdout_path,
@@ -1430,6 +1612,8 @@ static struct check *check_table[] = {
&alias_paths,
+ &graph_nodes, &graph_child_address, &graph_port, &graph_endpoint,
+
&always_fail,
};
diff --git a/scripts/dtc/dtc-parser.y b/scripts/dtc/dtc-parser.y
index 66ff7f7d8eb7..011a5b25539a 100644
--- a/scripts/dtc/dtc-parser.y
+++ b/scripts/dtc/dtc-parser.y
@@ -191,18 +191,18 @@ devicetree:
}
| devicetree DT_REF nodedef
{
- struct node *target = get_node_by_ref($1, $2);
-
- if (target) {
- merge_nodes(target, $3);
+ /*
+ * We rely on the rule being always:
+ * versioninfo plugindecl memreserves devicetree
+ * so $-1 is what we want (plugindecl)
+ */
+ if ($<flags>-1 & DTSF_PLUGIN) {
+ add_orphan_node($1, $3, $2);
} else {
- /*
- * We rely on the rule being always:
- * versioninfo plugindecl memreserves devicetree
- * so $-1 is what we want (plugindecl)
- */
- if ($<flags>-1 & DTSF_PLUGIN)
- add_orphan_node($1, $3, $2);
+ struct node *target = get_node_by_ref($1, $2);
+
+ if (target)
+ merge_nodes(target, $3);
else
ERROR(&@2, "Label or path %s not found", $2);
}
diff --git a/scripts/dtc/livetree.c b/scripts/dtc/livetree.c
index 81b6c484542d..6e4c367f54b3 100644
--- a/scripts/dtc/livetree.c
+++ b/scripts/dtc/livetree.c
@@ -238,10 +238,16 @@ struct node * add_orphan_node(struct node *dt, struct node *new_node, char *ref)
struct data d = empty_data;
char *name;
- d = data_add_marker(d, REF_PHANDLE, ref);
- d = data_append_integer(d, 0xffffffff, 32);
+ if (ref[0] == '/') {
+ d = data_append_data(d, ref, strlen(ref) + 1);
- p = build_property("target", d);
+ p = build_property("target-path", d);
+ } else {
+ d = data_add_marker(d, REF_PHANDLE, ref);
+ d = data_append_integer(d, 0xffffffff, 32);
+
+ p = build_property("target", d);
+ }
xasprintf(&name, "fragment@%u",
next_orphan_fragment++);
diff --git a/scripts/dtc/version_gen.h b/scripts/dtc/version_gen.h
index ad87849e333b..b00f14ff7a17 100644
--- a/scripts/dtc/version_gen.h
+++ b/scripts/dtc/version_gen.h
@@ -1 +1 @@
-#define DTC_VERSION "DTC 1.4.6-gaadd0b65"
+#define DTC_VERSION "DTC 1.4.6-g84e414b0"
--
2.17.1
next prev parent reply other threads:[~2020-02-24 18:05 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-24 18:05 [PATCH 1/7] misc: Add more -I$(objtree)/$(obj) lines Tom Rini
2020-02-24 18:05 ` [PATCH 2/7] mx31pdk: Move CONFIG_SPL_LDSCRIPT to defconfig Tom Rini
2020-02-24 19:22 ` Magnus Lilja
2020-03-17 15:30 ` Tom Rini
2020-02-24 18:05 ` [PATCH 3/7] Kconfig: Escape variables to make in default strings Tom Rini
2020-02-26 2:35 ` Masahiro Yamada
2020-02-26 15:22 ` Tom Rini
2020-02-24 18:05 ` [PATCH 4/7] Kconfig: Remove redundant variable sets Tom Rini
2020-02-26 2:41 ` Masahiro Yamada
2020-02-26 15:23 ` Tom Rini
2020-02-24 18:05 ` [PATCH 5/7] Azure / GitLab / Travis: Add Kconfig unit tests to a job Tom Rini
2020-02-26 2:44 ` Masahiro Yamada
2020-02-24 18:05 ` Tom Rini [this message]
2020-02-24 18:05 ` [PATCH 7/7] kconfig / kbuild: re-sync with Linux 4.18 Tom Rini
2020-02-26 1:04 ` Masahiro Yamada
2020-02-26 3:32 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200224180541.3654-6-trini@konsulko.com \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox