From: Sean Anderson <seanga2@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v5 31/33] riscv: Enable cpu clock if it is present
Date: Fri, 28 Feb 2020 16:05:49 -0500 [thread overview]
Message-ID: <20200228210552.615672-32-seanga2@gmail.com> (raw)
In-Reply-To: <20200228210552.615672-1-seanga2@gmail.com>
The cpu clock is probably already enabled if we are executing code (though
we could be executing from a different core). This patch prevents the cpu
clock or its parents from being disabled.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
This patch was previously submitted on its own as
https://patchwork.ozlabs.org/patch/1232420/
Changes in v4:
- New
drivers/cpu/riscv_cpu.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/cpu/riscv_cpu.c b/drivers/cpu/riscv_cpu.c
index c6ed060abc..9ce58695aa 100644
--- a/drivers/cpu/riscv_cpu.c
+++ b/drivers/cpu/riscv_cpu.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
+ * Copyright (C) 2020, Sean Anderson <seanga2@gmail.com>
*/
#include <clk.h>
@@ -117,6 +118,24 @@ static int riscv_cpu_bind(struct udevice *dev)
return 0;
}
+static int riscv_cpu_probe(struct udevice *dev)
+{
+ int ret = 0;
+ struct clk clk;
+
+ /* Get a clock if it exists */
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret)
+ return 0;
+
+ ret = clk_enable(&clk);
+ clk_free(&clk);
+ if (ret == -ENOSYS || ret == -ENOTSUPP)
+ return 0;
+ else
+ return ret;
+}
+
static const struct cpu_ops riscv_cpu_ops = {
.get_desc = riscv_cpu_get_desc,
.get_info = riscv_cpu_get_info,
@@ -133,6 +152,7 @@ U_BOOT_DRIVER(riscv_cpu) = {
.id = UCLASS_CPU,
.of_match = riscv_cpu_ids,
.bind = riscv_cpu_bind,
+ .probe = riscv_cpu_probe,
.ops = &riscv_cpu_ops,
.flags = DM_FLAG_PRE_RELOC,
};
--
2.25.0
next prev parent reply other threads:[~2020-02-28 21:05 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-28 21:05 [PATCH v5 00/33] riscv: Add Sipeed Maix support Sean Anderson
2020-02-28 21:05 ` [PATCH v5 01/33] clk: Always use the supplied struct clk Sean Anderson
2020-02-28 21:05 ` [PATCH v5 02/33] clk: Check that ops of composite clock components exist before calling Sean Anderson
2020-02-28 21:05 ` [PATCH v5 03/33] clk: Unconditionally recursively en-/dis-able clocks Sean Anderson
2020-03-04 6:50 ` Rick Chen
2020-02-28 21:05 ` [PATCH v5 04/33] clk: Add functions to register CCF clock structs Sean Anderson
2020-02-28 21:05 ` [PATCH v5 05/33] clk: Add K210 pll support Sean Anderson
2020-02-28 21:05 ` [PATCH v5 06/33] clk: Add a bypass clock for K210 Sean Anderson
2020-02-28 21:05 ` [PATCH v5 07/33] clk: Add K210 clock support Sean Anderson
2020-03-04 6:58 ` Rick Chen
2020-03-04 14:54 ` Sean Anderson
2020-02-28 21:05 ` [PATCH v5 08/33] doc: Fix typo in FIT documentation Sean Anderson
2020-03-02 2:21 ` Bin Meng
2020-02-28 21:05 ` [PATCH v5 09/33] dm: Add support for simple-pm-bus Sean Anderson
2020-02-28 21:05 ` [PATCH v5 10/33] dm: Fix error handling for dev_read_addr_ptr Sean Anderson
2020-03-02 2:22 ` Bin Meng
2020-03-02 19:46 ` Simon Glass
2020-02-28 21:05 ` [PATCH v5 11/33] reset: Add generic reset driver Sean Anderson
2020-02-28 21:05 ` [PATCH v5 12/33] lib: Always set errno in hcreate_r Sean Anderson
2020-03-02 2:24 ` Bin Meng
2020-02-28 21:05 ` [PATCH v5 13/33] pinctrl: Add support for Kendryte K210 FPIOA Sean Anderson
2020-03-04 6:47 ` Rick Chen
2020-03-04 15:00 ` Sean Anderson
2020-02-28 21:05 ` [PATCH v5 14/33] gpio: sifive: Use generic reg read function Sean Anderson
2020-03-02 2:24 ` Bin Meng
2020-02-28 21:05 ` [PATCH v5 15/33] gpio: dw: Fix warnings about casting int to pointer Sean Anderson
2020-03-02 2:27 ` Bin Meng
2020-03-02 3:50 ` Sean Anderson
2020-02-28 21:05 ` [PATCH v5 16/33] gpio: dw: Add a trailing underscore to generated name Sean Anderson
2020-02-28 21:05 ` [PATCH v5 17/33] gpio: dw: Return output value when direction is out Sean Anderson
2020-02-28 21:05 ` [PATCH v5 18/33] led: gpio: Default to using node name if label is absent Sean Anderson
2020-02-28 21:05 ` [PATCH v5 19/33] spi: dw: Add device tree properties for fields in CTRL1 Sean Anderson
2020-03-04 6:15 ` Rick Chen
2020-03-04 15:01 ` Sean Anderson
2020-02-28 21:05 ` [PATCH v5 20/33] spi: dw: Rename "cs-gpio" to "cs-gpios" Sean Anderson
2020-02-28 21:05 ` [PATCH v5 21/33] spi: dw: Use generic function to read reg address Sean Anderson
2020-02-28 21:05 ` [PATCH v5 22/33] spi: dw: Speed up transfer loops Sean Anderson
2020-02-28 21:05 ` [PATCH v5 23/33] spi: dw: Properly set rx_end when not recieving Sean Anderson
2020-02-29 17:47 ` Sean Anderson
2020-02-28 21:05 ` [PATCH v5 24/33] spi: dw: Add mem_ops Sean Anderson
2020-02-28 21:05 ` [PATCH v5 25/33] wdt: Move asm/utils.h to log2.h Sean Anderson
2020-02-28 21:46 ` Marek Vasut
2020-02-28 22:43 ` Sean Anderson
2020-02-28 23:27 ` Marek Vasut
2020-03-03 6:58 ` Rick Chen
2020-03-03 14:11 ` Sean Anderson
2020-02-28 21:05 ` [PATCH v5 26/33] riscv: Add headers for asm/global_data.h Sean Anderson
2020-02-28 21:05 ` [PATCH v5 27/33] riscv: Fix race conditions when initializing IPI Sean Anderson
2020-03-02 9:08 ` Rick Chen
2020-03-02 15:43 ` Sean Anderson
2020-03-02 23:15 ` Lukas Auer
2020-03-03 8:27 ` Rick Chen
2020-03-05 2:18 ` Rick Chen
2020-03-02 23:17 ` Lukas Auer
2020-03-02 23:43 ` Sean Anderson
2020-03-03 21:53 ` Lukas Auer
2020-03-03 21:57 ` Sean Anderson
2020-03-04 15:25 ` Lukas Auer
2020-02-28 21:05 ` [PATCH v5 28/33] riscv: Add option to support RISC-V privileged spec 1.9 Sean Anderson
2020-03-04 6:20 ` Rick Chen
2020-02-28 21:05 ` [PATCH v5 29/33] riscv: Allow use of reset drivers Sean Anderson
2020-02-28 21:05 ` [PATCH v5 30/33] riscv: Try to get cpu frequency from a "clocks" node if it exists Sean Anderson
2020-02-28 21:05 ` Sean Anderson [this message]
2020-02-28 21:05 ` [PATCH v5 32/33] riscv: Add device tree for K210 and Sipeed Maix BitM Sean Anderson
2020-02-28 21:05 ` [PATCH v5 33/33] riscv: Add Sipeed Maix support Sean Anderson
2020-03-04 6:04 ` Rick Chen
2020-03-04 7:47 ` Rick Chen
2020-03-04 15:11 ` Sean Anderson
2020-03-05 3:40 ` Bin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200228210552.615672-32-seanga2@gmail.com \
--to=seanga2@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox