[PATCH] versal: watchdog: Add support for Xilinx window watchdog

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Wed, Mar 11, 2020 at 11:48:23AM +0100, Michal Simek wrote:
> From: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
> 
> Add support for Xilinx window watchdog, which can be found on
> Versal platforms.

...

> +config WWDT_XILINX

Even though I don't think extra W is a good idea.

> +	bool "Xilinx window watchdog timer support"
> +	depends on WDT && ARCH_VERSAL
> +	imply WATCHDOG
> +	help
> +	  Select this to enable Xilinx window watchdog timer, which can be found on
> +	  Xilinx Versal Platforms.

> +struct wwdt_regs {

> +	u32 reserved0[1024];

These are not needed. Use regmap with register offsets.

> +	u32 refresh;		/* Refresh Register [0x1000] */

> +	u32 reserved1[1023];

Ditto.

> +	u32 csr;		/* Control/Status Register [0x2000] */
> +	u32 reserved2;
> +	u32 offset;		/* Offset Register [0x2008] */
> +	u32 reserved3;
> +	u32 cmp0;		/* Compare Value Register0 [0x2010] */
> +	u32 cmp1;		/* Compare Value Register1 [0x2014] */

> +	u32 reserved4[1006];

Ditto.

> +	u32 warmrst;		/* Warm Reset Register [0x2FD0] */
> +};

> +static int xlnx_wwdt_reset(struct udevice *dev)
> +{
> +	struct xlnx_wwdt_priv *wdt = dev_get_priv(dev);
> +

> +	dev_dbg(dev, "%s ", __func__);

Usually this is noise.

> +
> +	writel(XWT_WWREF_GWRR_MASK, &wdt->regs->refresh);
> +
> +	return 0;

And taking above into consideration, I don't see any value of this helper.
writel() can be used in-place.

> +}

-- 
With Best Regards,
Andy Shevchenko