public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Sean Anderson <seanga2@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v7 03/22] clk: Unconditionally recursively en-/dis-able clocks
Date: Thu, 19 Mar 2020 16:54:01 -0400	[thread overview]
Message-ID: <20200319205420.720815-4-seanga2@gmail.com> (raw)
In-Reply-To: <20200319205420.720815-1-seanga2@gmail.com>

For clocks not in the CCF, their parents will not have UCLASS_CLK, so we
just enable them as normal. The enable count is local to the struct clk,
but this will never result in the actual en-/dis-able op being called
(unless the same struct clk is enabled twice).

For clocks in the CCF, we always traverse up the tree when enabling.
Previously, CCF clocks without id set would be skipped, stopping the
traversal too early.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
---

Changes in v6:
- Fix disable incorrectly recursing into non-clock devices

Changes in v5:
- Clear enable_count on request

Changes in v4:
- Lint

Changes in v3:
- New

 drivers/clk/clk-uclass.c | 60 ++++++++++++++++++----------------------
 1 file changed, 27 insertions(+), 33 deletions(-)

diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c
index 71878474eb..aa8dd9d027 100644
--- a/drivers/clk/clk-uclass.c
+++ b/drivers/clk/clk-uclass.c
@@ -410,6 +410,7 @@ int clk_request(struct udevice *dev, struct clk *clk)
 	ops = clk_dev_ops(dev);
 
 	clk->dev = dev;
+	clk->enable_count = 0;
 
 	if (!ops->request)
 		return 0;
@@ -521,7 +522,6 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 int clk_enable(struct clk *clk)
 {
 	const struct clk_ops *ops;
-	struct clk *clkp = NULL;
 	int ret;
 
 	debug("%s(clk=%p)\n", __func__, clk);
@@ -530,32 +530,29 @@ int clk_enable(struct clk *clk)
 	ops = clk_dev_ops(clk->dev);
 
 	if (CONFIG_IS_ENABLED(CLK_CCF)) {
-		/* Take id 0 as a non-valid clk, such as dummy */
-		if (clk->id && !clk_get_by_id(clk->id, &clkp)) {
-			if (clkp->enable_count) {
-				clkp->enable_count++;
-				return 0;
-			}
-			if (clkp->dev->parent &&
-			    device_get_uclass_id(clkp->dev) == UCLASS_CLK) {
-				ret = clk_enable(dev_get_clk_ptr(clkp->dev->parent));
-				if (ret) {
-					printf("Enable %s failed\n",
-					       clkp->dev->parent->name);
-					return ret;
-				}
+		if (clk->enable_count) {
+			clk->enable_count++;
+			return 0;
+		}
+		if (clk->dev->parent &&
+		    device_get_uclass_id(clk->dev->parent) == UCLASS_CLK) {
+			ret = clk_enable(dev_get_clk_ptr(clk->dev->parent));
+			if (ret) {
+				printf("Enable %s failed\n",
+				       clk->dev->parent->name);
+				return ret;
 			}
 		}
 
 		if (ops->enable) {
 			ret = ops->enable(clk);
 			if (ret) {
-				printf("Enable %s failed\n", clk->dev->name);
+				printf("Enable %s failed (error %d)\n",
+				       clk->dev->name, ret);
 				return ret;
 			}
 		}
-		if (clkp)
-			clkp->enable_count++;
+		clk->enable_count++;
 	} else {
 		if (!ops->enable)
 			return -ENOSYS;
@@ -581,7 +578,6 @@ int clk_enable_bulk(struct clk_bulk *bulk)
 int clk_disable(struct clk *clk)
 {
 	const struct clk_ops *ops;
-	struct clk *clkp = NULL;
 	int ret;
 
 	debug("%s(clk=%p)\n", __func__, clk);
@@ -590,29 +586,27 @@ int clk_disable(struct clk *clk)
 	ops = clk_dev_ops(clk->dev);
 
 	if (CONFIG_IS_ENABLED(CLK_CCF)) {
-		if (clk->id && !clk_get_by_id(clk->id, &clkp)) {
-			if (clkp->enable_count == 0) {
-				printf("clk %s already disabled\n",
-				       clkp->dev->name);
-				return 0;
-			}
-
-			if (--clkp->enable_count > 0)
-				return 0;
+		if (clk->enable_count == 0) {
+			printf("clk %s already disabled\n",
+			       clk->dev->name);
+			return 0;
 		}
 
+		if (--clk->enable_count > 0)
+			return 0;
+
 		if (ops->disable) {
 			ret = ops->disable(clk);
 			if (ret)
 				return ret;
 		}
 
-		if (clkp && clkp->dev->parent &&
-		    device_get_uclass_id(clkp->dev) == UCLASS_CLK) {
-			ret = clk_disable(dev_get_clk_ptr(clkp->dev->parent));
+		if (clk->dev->parent &&
+		    device_get_uclass_id(clk->dev->parent) == UCLASS_CLK) {
+			ret = clk_disable(dev_get_clk_ptr(clk->dev->parent));
 			if (ret) {
-				printf("Disable %s failed\n",
-				       clkp->dev->parent->name);
+				printf("Disable %s failed (error %d)\n",
+				       clk->dev->parent->name, ret);
 				return ret;
 			}
 		}
-- 
2.25.1

  parent reply	other threads:[~2020-03-19 20:54 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-19 20:53 [PATCH v7 00/22] riscv: Add Sipeed Maix support Sean Anderson
2020-03-19 20:53 ` [PATCH v7 01/22] clk: Always use the supplied struct clk Sean Anderson
2020-03-19 20:54 ` [PATCH v7 02/22] clk: Check that ops of composite clock components exist before calling Sean Anderson
2020-03-19 20:54 ` Sean Anderson [this message]
2020-03-19 20:54 ` [PATCH v7 04/22] clk: Fix clk_get_by_* handling of index Sean Anderson
2020-03-30  6:42   ` Rick Chen
2020-03-19 20:54 ` [PATCH v7 05/22] clk: Add functions to register CCF clock structs Sean Anderson
2020-03-30  7:05   ` Rick Chen
2020-03-19 20:54 ` [PATCH v7 06/22] clk: Add K210 pll support Sean Anderson
2020-03-19 20:54 ` [PATCH v7 07/22] clk: Add a bypass clock for K210 Sean Anderson
2020-03-19 20:54 ` [PATCH v7 08/22] clk: Add K210 clock support Sean Anderson
2020-03-19 20:54 ` [PATCH v7 09/22] dm: Add support for simple-pm-bus Sean Anderson
2020-03-19 20:54 ` [PATCH v7 10/22] dm: Fix error handling for dev_read_addr_ptr Sean Anderson
2020-03-19 20:54 ` [PATCH v7 11/22] reset: Add generic reset driver Sean Anderson
2020-03-19 20:54 ` [PATCH v7 12/22] lib: Always set errno in hcreate_r Sean Anderson
2020-03-19 20:54 ` [PATCH v7 13/22] riscv: Add headers for asm/global_data.h Sean Anderson
2020-03-19 20:54 ` [PATCH v7 14/22] riscv: Clear pending interrupts before enabling IPIs Sean Anderson
2020-03-27  9:04   ` Rick Chen
2020-03-19 20:54 ` [PATCH v7 15/22] riscv: Clean up IPI initialization code Sean Anderson
2020-03-27  9:03   ` Rick Chen
2020-03-30  7:39     ` Rick Chen
2020-03-19 20:54 ` [PATCH v7 16/22] riscv: Add option to support RISC-V privileged spec 1.9 Sean Anderson
2020-03-19 20:54 ` [PATCH v7 17/22] riscv: Allow use of reset drivers Sean Anderson
2020-03-19 20:54 ` [PATCH v7 18/22] riscv: Try to get cpu frequency from a "clocks" node if it exists Sean Anderson
2020-03-19 20:54 ` [PATCH v7 19/22] riscv: Enable cpu clock if it is present Sean Anderson
2020-03-19 20:54 ` [PATCH v7 20/22] riscv: Add device tree for K210 and Sipeed Maix BitM Sean Anderson
2020-03-19 20:54 ` [PATCH v7 21/22] doc: riscv: Add documentation for Sipeed Maix Bit Sean Anderson
2020-03-19 20:54 ` [PATCH v7 22/22] riscv: Add Sipeed Maix support Sean Anderson
2020-03-30  7:14   ` Rick Chen
2020-03-30  8:39     ` Sean Anderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200319205420.720815-4-seanga2@gmail.com \
    --to=seanga2@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox