[RFT PATCH v1 5/5] usb: Handle QT_TOKEN_STATUS_XACTERR error when sending data

[Lukasz Majewski <lukma@denx.de>]

Hi Marek,

> On 3/22/20 2:00 PM, Lukasz Majewski wrote:
> > This code adds check if QT_TOKEN_STATUS_XACTERR error occurred.
> > When it is detected the token is reconfigured and transmission is
> > retried.
> > 
> > This code is the port to newest U-Boot of the fix from - "rayvt"
> > (from [1]).
> > 
> > Links:
> > [1] - https://forum.doozan.com/read.php?3,35295,35295#msg-35295
> > [2] -
> > https://www.dropbox.com/s/nrkrd1no63viuu8/uboot-bodhi-2016.05-timeoutTD.patch?dl=0
> > 
> > 
> > Signed-off-by: Lukasz Majewski <lukma@denx.de>
> > [Unfortunately, the original patch [2] did not contain S-o-B from
> > the original author - "rayvt"]
> > ---
> > 
> >  drivers/usb/host/ehci-hcd.c | 27 ++++++++++++++++++++++++++-
> >  1 file changed, 26 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/usb/host/ehci-hcd.c
> > b/drivers/usb/host/ehci-hcd.c index 0a77111f80..45eda7ad24 100644
> > --- a/drivers/usb/host/ehci-hcd.c
> > +++ b/drivers/usb/host/ehci-hcd.c
> > @@ -315,6 +315,7 @@ ehci_submit_async(struct usb_device *dev,
> > unsigned long pipe, void *buffer, int timeout;
> >  	int ret = 0;
> >  	struct ehci_ctrl *ctrl = ehci_get_ctrl(dev);
> > +	int trynum;
> >  
> >  	debug("dev=%p, pipe=%lx, buffer=%p, length=%d, req=%p\n",
> > dev, pipe, buffer, length, req);
> > @@ -560,6 +561,10 @@ ehci_submit_async(struct usb_device *dev,
> > unsigned long pipe, void *buffer,
> > ehci_writel(&ctrl->hcor->or_usbsts, (usbsts & 0x3f)); 
> >  	/* Enable async. schedule. */
> > +	trynum = 1;	/* No more than 2 tries, in case of
> > XACTERR. */ +retry_xacterr:;
> > +	vtd = &qtd[qtd_counter - 1];
> > +
> >  	cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
> >  	cmd |= CMD_ASE;
> >  	ehci_writel(&ctrl->hcor->or_usbcmd, cmd);  
> 
> Are you sure always retrying the transfer if you get XACTERR is the
> right thing to do, even if you get that e.g. on filesystem writes ?

Please correct me if I'm wrong, but this function - ehci_submit_async
- doesn't work with filesystem. It just setups proper EHCI descriptor
  and checks if it was sent with or without errors.

When the XACTERR happens, proper flag is cleared and the transmission
is retried.


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200323/d6546ec7/attachment.sig>