From: Igor Opaniuk <igor.opaniuk@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v2 02/13] ARM: dts: imx8qxp-colibri: replace dm-spl with dm-pre-proper
Date: Fri, 27 Mar 2020 12:28:14 +0200 [thread overview]
Message-ID: <20200327102825.10230-3-igor.opaniuk@gmail.com> (raw)
In-Reply-To: <20200327102825.10230-1-igor.opaniuk@gmail.com>
From: Igor Opaniuk <igor.opaniuk@toradex.com>
For non-SPL/TPL setups dm-spl, dm-tpl, dm-pre-proper, dm-pre-reloc are
handled equally, forcing the nodes with these properties
to be accessible and device being probed
before pre-relocation of U-Boot proper (drivers/core/util.c):
bool ofnode_pre_reloc(ofnode node)
{
/* for SPL and TPL the remaining nodes after the fdtgrep 1st pass
* had property dm-pre-reloc or u-boot,dm-spl/tpl.
* They are removed in final dtb (fdtgrep 2nd pass)
*/
return true;
if (ofnode_read_bool(node, "u-boot,dm-pre-reloc"))
return true;
if (ofnode_read_bool(node, "u-boot,dm-pre-proper"))
return true;
/*
* In regular builds individual spl and tpl handling both
* count as handled pre-relocation for later second init.
*/
if (ofnode_read_bool(node, "u-boot,dm-spl") ||
ofnode_read_bool(node, "u-boot,dm-tpl"))
return true;
return false;
}
Howewer, to avoid confusion in future, replace dm-spl
`%s/dm-spl/dm-pre-proper/g` properties to dm-pre-proper
to explicitly state that they are handled during pre-relocation
stage of U-Boot proper.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
---
arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi | 56 ++++++++++----------
1 file changed, 28 insertions(+), 28 deletions(-)
diff --git a/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi b/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi
index 5b061f94ba..87de9b5653 100644
--- a/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi
@@ -5,113 +5,113 @@
&{/imx8qx-pm} {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&mu {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&clk {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&iomuxc {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&pd_lsio {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&pd_lsio_gpio0 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&pd_lsio_gpio1 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&pd_lsio_gpio2 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&pd_lsio_gpio3 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&pd_lsio_gpio4 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&pd_lsio_gpio5 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&pd_lsio_gpio6 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&pd_lsio_gpio7 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&pd_conn {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&pd_conn_sdch0 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&pd_conn_sdch1 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&pd_conn_sdch2 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&gpio0 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&gpio1 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&gpio2 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&gpio3 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&gpio4 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&gpio5 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&gpio6 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&gpio7 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&lpuart3 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&usdhc1 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
&usdhc2 {
- u-boot,dm-spl;
+ u-boot,dm-pre-proper;
};
--
2.17.1
next prev parent reply other threads:[~2020-03-27 10:28 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-27 10:28 [PATCH v2 00/13] bugfix/improvements for IMX-based modules Igor Opaniuk
2020-03-27 10:28 ` [PATCH v2 01/13] ARM: dts: imx8qm-apalis: replace dm-spl with dm-pre-proper Igor Opaniuk
2020-03-27 10:28 ` Igor Opaniuk [this message]
2020-03-27 10:28 ` [PATCH v2 03/13] ARM: dts: imx8qm-apalis: dm-pre-proper for pd_dma nodes Igor Opaniuk
2020-03-27 10:28 ` [PATCH v2 04/13] ARM: dts: imx8qxp-colibri: " Igor Opaniuk
2020-03-27 10:28 ` [PATCH v2 05/13] colibri_imx6: set gpr1 ENET_CLK_SEL Igor Opaniuk
2020-03-27 10:28 ` [PATCH v2 06/13] verdin-imx8mm: adjust dram size in case bl32 is used Igor Opaniuk
2020-04-18 10:50 ` sbabic at denx.de
2020-03-27 10:28 ` [PATCH v2 07/13] imx8mm_evk: " Igor Opaniuk
2020-03-27 10:49 ` Oleksandr Suvorov
2020-04-18 10:50 ` sbabic at denx.de
2020-03-27 10:28 ` [PATCH v2 08/13] verdin-imx8mm: add nfsboot wrapper to env Igor Opaniuk
2020-03-27 10:43 ` Oleksandr Suvorov
2020-04-18 10:51 ` sbabic at denx.de
2020-03-27 10:28 ` [PATCH v2 09/13] colibri_vf: enable relocation of fdt and initrd Igor Opaniuk
2020-04-18 10:50 ` sbabic at denx.de
2020-03-27 10:28 ` [PATCH v2 10/13] colibri_imx7: " Igor Opaniuk
2020-04-18 10:51 ` sbabic at denx.de
2020-03-27 10:28 ` [PATCH v2 11/13] apalis_imx6: " Igor Opaniuk
2020-04-18 10:51 ` sbabic at denx.de
2020-03-27 10:28 ` [PATCH v2 12/13] colibri-imx6ull: " Igor Opaniuk
2020-04-18 10:50 ` sbabic at denx.de
2020-03-27 10:28 ` [PATCH v2 13/13] colibri_imx6: " Igor Opaniuk
2020-04-18 10:50 ` sbabic at denx.de
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200327102825.10230-3-igor.opaniuk@gmail.com \
--to=igor.opaniuk@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox