From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [PATCH 20/26 v6] spl: spl_nor: Move legacy image loading into spl_legacy.c
Date: Wed, 8 Apr 2020 10:09:36 +0200 [thread overview]
Message-ID: <20200408080942.7694-21-sr@denx.de> (raw)
In-Reply-To: <20200408080942.7694-1-sr@denx.de>
Move the legacy image loading into spl_legacy.c. This makes it easier
to extend the legacy image handling with new features that other
SPL loaders might use (e.g. spl_spi.c etc).
No functional change indended.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
---
Changes in v6:
- New patch
common/spl/spl_legacy.c | 17 +++++++++++++++++
common/spl/spl_nor.c | 34 +++++++++++++++++-----------------
include/spl.h | 14 ++++++++++++++
3 files changed, 48 insertions(+), 17 deletions(-)
diff --git a/common/spl/spl_legacy.c b/common/spl/spl_legacy.c
index 772135193e..d0fc4b111e 100644
--- a/common/spl/spl_legacy.c
+++ b/common/spl/spl_legacy.c
@@ -51,3 +51,20 @@ int spl_parse_legacy_header(struct spl_image_info *spl_image,
return 0;
}
+
+int spl_load_legacy_img(struct spl_image_info *spl_image,
+ const struct image_header *header,
+ uintptr_t dataptr, struct spl_load_info *info)
+{
+ int ret;
+
+ ret = spl_parse_image_header(spl_image, header);
+ if (ret)
+ return ret;
+
+ dataptr = (uintptr_t)header + sizeof(struct image_header);
+ info->read(info, dataptr, spl_image->size,
+ (void *)(unsigned long)spl_image->load_addr);
+
+ return 0;
+}
diff --git a/common/spl/spl_nor.c b/common/spl/spl_nor.c
index cb8e06fe1f..d55165b772 100644
--- a/common/spl/spl_nor.c
+++ b/common/spl/spl_nor.c
@@ -24,11 +24,8 @@ unsigned long __weak spl_nor_get_uboot_base(void)
static int spl_nor_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
{
- int ret;
__maybe_unused const struct image_header *header;
__maybe_unused struct spl_load_info load;
- struct image_header hdr;
- uintptr_t dataptr;
/*
* Loading of the payload to SDRAM is done with skipping of
@@ -45,6 +42,8 @@ static int spl_nor_load_image(struct spl_image_info *spl_image,
header = (const struct image_header *)CONFIG_SYS_OS_BASE;
#ifdef CONFIG_SPL_LOAD_FIT
if (image_get_magic(header) == FDT_MAGIC) {
+ int ret;
+
debug("Found FIT\n");
load.bl_len = 1;
load.read = spl_nor_load_read;
@@ -63,6 +62,7 @@ static int spl_nor_load_image(struct spl_image_info *spl_image,
#endif
if (image_get_os(header) == IH_OS_LINUX) {
/* happy - was a Linux */
+ int ret;
ret = spl_parse_image_header(spl_image, header);
if (ret)
@@ -95,11 +95,9 @@ static int spl_nor_load_image(struct spl_image_info *spl_image,
debug("Found FIT format U-Boot\n");
load.bl_len = 1;
load.read = spl_nor_load_read;
- ret = spl_load_simple_fit(spl_image, &load,
- spl_nor_get_uboot_base(),
- (void *)header);
-
- return ret;
+ return spl_load_simple_fit(spl_image, &load,
+ spl_nor_get_uboot_base(),
+ (void *)header);
}
#endif
if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER)) {
@@ -109,17 +107,19 @@ static int spl_nor_load_image(struct spl_image_info *spl_image,
spl_nor_get_uboot_base());
}
- ret = spl_parse_image_header(spl_image,
- (const struct image_header *)spl_nor_get_uboot_base());
- if (ret)
- return ret;
+ if (IS_ENABLED(CONFIG_SPL_LEGACY_IMAGE_SUPPORT)) {
+ struct image_header hdr;
+ uintptr_t dataptr;
- /* Payload image may not be aligned, so copy it for safety */
- memcpy(&hdr, (void *)spl_nor_get_uboot_base(), sizeof(hdr));
- dataptr = spl_nor_get_uboot_base() + sizeof(struct image_header);
+ /* Payload image may not be aligned, so copy it for safety */
+ memcpy(&hdr, (void *)spl_nor_get_uboot_base(), sizeof(hdr));
+ dataptr = spl_nor_get_uboot_base() + sizeof(hdr);
- memcpy((void *)(unsigned long)spl_image->load_addr,
- (void *)dataptr, spl_image->size);
+ /* Legacy image handling */
+ load.bl_len = 1;
+ load.read = spl_nor_load_read;
+ return spl_load_legacy_img(spl_image, &hdr, dataptr, &load);
+ }
return 0;
}
diff --git a/include/spl.h b/include/spl.h
index 6087cd793c..5331591db5 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -219,6 +219,20 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
#define SPL_COPY_PAYLOAD_ONLY 1
#define SPL_FIT_FOUND 2
+/**
+ * spl_load_legacy_img() - Loads a legacy image from a device.
+ * @spl_image: Image description to set up
+ * @dataptr: Source location of the image
+ * @header: Image header to parse
+ *
+ * Reads an legacy image from the device. Loads u-boot image to
+ * specified load address.
+ * Returns 0 on success.
+ */
+int spl_load_legacy_img(struct spl_image_info *spl_image,
+ const struct image_header *header,
+ uintptr_t dataptr, struct spl_load_info *load);
+
/**
* spl_load_imx_container() - Loads a imx container image from a device.
* @spl_image: Image description to set up
--
2.26.0
next prev parent reply other threads:[~2020-04-08 8:09 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-08 8:09 [PATCH 00/26 v6] Refactor the architecture parts of mt7628 Stefan Roese
2020-04-08 8:09 ` [PATCH 01/26 v6] mips: add support to restore exception vector base before booting linux Stefan Roese
2020-04-08 8:09 ` [PATCH 02/26 v6] mips: mtmips: add predefined i-cache/d-cache size and linesize Stefan Roese
2020-04-08 8:09 ` [PATCH 03/26 v6] mips: add an option to support initialize SRAM for initial stack Stefan Roese
2020-04-08 8:09 ` [PATCH 04/26 v6] mips: start.S: avoid overwriting outside gd when clearing global data in stack Stefan Roese
2020-04-08 8:09 ` [PATCH 05/26 v6] sysreset: add reset controller based reboot driver Stefan Roese
2020-04-08 8:09 ` [PATCH 06/26 v6] mips: mtmips: make use of sysreset-resetctrl for mt7628 soc Stefan Roese
2020-04-08 8:09 ` [PATCH 07/26 v6] configs: enable CONFIG_RESTORE_EXCEPTION_VECTOR_BASE for all mtmips boards Stefan Roese
2020-04-08 8:09 ` [PATCH 08/26 v6] mips: add a mtmips-specific field to architecture-specific global data Stefan Roese
2020-04-08 8:09 ` [PATCH 09/26 v6] mips: add a option to support not reserving malloc space on initial stack Stefan Roese
2020-04-08 8:09 ` [PATCH 10/26 v6] mips: mtmips: rewrite lowlevel codes of mt7628 Stefan Roese
2020-04-08 8:09 ` [PATCH 11/26 v6] dts: mtmips: add alternative pinmux node for uart2 Stefan Roese
2020-04-08 8:09 ` [PATCH 12/26 v6] mips: enable support for appending dtb to spl binary Stefan Roese
2020-04-08 8:09 ` [PATCH 13/26 v6] mips: add an option to enable u_boot_list section for SPL loaders in u-boot-spl.lds Stefan Roese
2020-04-08 8:09 ` [PATCH 14/26 v6] lib: enable lzma decompression support for SPL build Stefan Roese
2020-04-08 8:09 ` [PATCH 15/26 v6] Makefile: add support to generate LZMA compressed u-boot image Stefan Roese
2020-04-08 8:09 ` [PATCH 16/26 v6] tools: binman: add etype file for u-boot-lzma-img Stefan Roese
2020-04-08 8:09 ` [PATCH 17/26 v6] spl: Extract legacy image handling into separate file Stefan Roese
2020-04-08 8:09 ` [PATCH 18/26 v6] spl: spl_legacy: Use IS_ENABLED() to remove #ifdef Stefan Roese
2020-04-08 8:09 ` [PATCH 19/26 v6] spl: spl_nor: Copy image header to local struct Stefan Roese
2020-04-09 7:24 ` Simon Goldschmidt
2020-04-08 8:09 ` Stefan Roese [this message]
2020-04-09 18:51 ` [PATCH 20/26 v6] spl: spl_nor: Move legacy image loading into spl_legacy.c Daniel Schwierzeck
2020-04-10 8:02 ` Stefan Roese
2020-04-08 8:09 ` [PATCH 21/26 v6] spl: spl_legacy: Add lzma decompression support for legacy image Stefan Roese
2020-04-08 8:09 ` [PATCH 22/26 v6] spl: spl_legacy: Add cache flush after reading U-Boot image Stefan Roese
2020-04-09 7:29 ` Simon Goldschmidt
2020-04-09 7:43 ` Stefan Roese
2020-04-09 16:47 ` Daniel Schwierzeck
2020-04-10 7:50 ` Stefan Roese
2020-04-09 18:15 ` Simon Goldschmidt
2020-04-08 8:09 ` [PATCH 23/26 v6] mips: mtmips: add SPL support Stefan Roese
2020-04-08 8:09 ` [PATCH 24/26 v6] mips: mtmips: enable SPL for all boards Stefan Roese
2020-04-08 8:09 ` [PATCH 25/26 v6] mips: mtmips: add support for mt7628-rfb Stefan Roese
2020-04-08 8:09 ` [PATCH 26/26 v6] mips: mtmips: Increase CONFIG_SPL_SYS_MALLOC_F_LEN Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200408080942.7694-21-sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox