From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [PATCH 05/26 v6] sysreset: add reset controller based reboot driver
Date: Wed, 8 Apr 2020 10:09:21 +0200 [thread overview]
Message-ID: <20200408080942.7694-6-sr@denx.de> (raw)
In-Reply-To: <20200408080942.7694-1-sr@denx.de>
From: Weijie Gao <weijie.gao@mediatek.com>
Some chips provide their sysreset function in reset controller, which is
normally a bit written to 1 to perform the sysreset.
This patch adds a new sysreset driver to take advantage of it.
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
---
Changes since v3: none
drivers/sysreset/Kconfig | 6 ++++
drivers/sysreset/Makefile | 1 +
drivers/sysreset/sysreset_resetctl.c | 48 ++++++++++++++++++++++++++++
3 files changed, 55 insertions(+)
create mode 100644 drivers/sysreset/sysreset_resetctl.c
diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig
index f09e138bb8..4be7433404 100644
--- a/drivers/sysreset/Kconfig
+++ b/drivers/sysreset/Kconfig
@@ -101,6 +101,12 @@ config SYSRESET_WATCHDOG
help
Reboot support for generic watchdog reset.
+config SYSRESET_RESETCTL
+ bool "Enable support for reset controller reboot driver"
+ select DM_RESET
+ help
+ Reboot support using generic reset controller.
+
config SYSRESET_X86
bool "Enable support for x86 processor reboot driver"
depends on X86
diff --git a/drivers/sysreset/Makefile b/drivers/sysreset/Makefile
index 51af68fad3..3ed4bab9e3 100644
--- a/drivers/sysreset/Makefile
+++ b/drivers/sysreset/Makefile
@@ -16,5 +16,6 @@ obj-$(CONFIG_SYSRESET_SOCFPGA_S10) += sysreset_socfpga_s10.o
obj-$(CONFIG_SYSRESET_TI_SCI) += sysreset-ti-sci.o
obj-$(CONFIG_SYSRESET_SYSCON) += sysreset_syscon.o
obj-$(CONFIG_SYSRESET_WATCHDOG) += sysreset_watchdog.o
+obj-$(CONFIG_SYSRESET_RESETCTL) += sysreset_resetctl.o
obj-$(CONFIG_$(SPL_TPL_)SYSRESET_X86) += sysreset_x86.o
obj-$(CONFIG_TARGET_XTFPGA) += sysreset_xtfpga.o
diff --git a/drivers/sysreset/sysreset_resetctl.c b/drivers/sysreset/sysreset_resetctl.c
new file mode 100644
index 0000000000..b8203ba605
--- /dev/null
+++ b/drivers/sysreset/sysreset_resetctl.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <sysreset.h>
+#include <reset.h>
+
+struct resetctl_reboot_priv {
+ struct reset_ctl_bulk resets;
+};
+
+static int resetctl_reboot_request(struct udevice *dev, enum sysreset_t type)
+{
+ struct resetctl_reboot_priv *priv = dev_get_priv(dev);
+
+ return reset_assert_bulk(&priv->resets);
+}
+
+static struct sysreset_ops resetctl_reboot_ops = {
+ .request = resetctl_reboot_request,
+};
+
+int resetctl_reboot_probe(struct udevice *dev)
+{
+ struct resetctl_reboot_priv *priv = dev_get_priv(dev);
+
+ return reset_get_bulk(dev, &priv->resets);
+}
+
+static const struct udevice_id resetctl_reboot_ids[] = {
+ { .compatible = "resetctl-reboot" },
+ { }
+};
+
+U_BOOT_DRIVER(resetctl_reboot) = {
+ .id = UCLASS_SYSRESET,
+ .name = "resetctl_reboot",
+ .of_match = resetctl_reboot_ids,
+ .ops = &resetctl_reboot_ops,
+ .priv_auto_alloc_size = sizeof(struct resetctl_reboot_priv),
+ .probe = resetctl_reboot_probe,
+};
--
2.26.0
next prev parent reply other threads:[~2020-04-08 8:09 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-08 8:09 [PATCH 00/26 v6] Refactor the architecture parts of mt7628 Stefan Roese
2020-04-08 8:09 ` [PATCH 01/26 v6] mips: add support to restore exception vector base before booting linux Stefan Roese
2020-04-08 8:09 ` [PATCH 02/26 v6] mips: mtmips: add predefined i-cache/d-cache size and linesize Stefan Roese
2020-04-08 8:09 ` [PATCH 03/26 v6] mips: add an option to support initialize SRAM for initial stack Stefan Roese
2020-04-08 8:09 ` [PATCH 04/26 v6] mips: start.S: avoid overwriting outside gd when clearing global data in stack Stefan Roese
2020-04-08 8:09 ` Stefan Roese [this message]
2020-04-08 8:09 ` [PATCH 06/26 v6] mips: mtmips: make use of sysreset-resetctrl for mt7628 soc Stefan Roese
2020-04-08 8:09 ` [PATCH 07/26 v6] configs: enable CONFIG_RESTORE_EXCEPTION_VECTOR_BASE for all mtmips boards Stefan Roese
2020-04-08 8:09 ` [PATCH 08/26 v6] mips: add a mtmips-specific field to architecture-specific global data Stefan Roese
2020-04-08 8:09 ` [PATCH 09/26 v6] mips: add a option to support not reserving malloc space on initial stack Stefan Roese
2020-04-08 8:09 ` [PATCH 10/26 v6] mips: mtmips: rewrite lowlevel codes of mt7628 Stefan Roese
2020-04-08 8:09 ` [PATCH 11/26 v6] dts: mtmips: add alternative pinmux node for uart2 Stefan Roese
2020-04-08 8:09 ` [PATCH 12/26 v6] mips: enable support for appending dtb to spl binary Stefan Roese
2020-04-08 8:09 ` [PATCH 13/26 v6] mips: add an option to enable u_boot_list section for SPL loaders in u-boot-spl.lds Stefan Roese
2020-04-08 8:09 ` [PATCH 14/26 v6] lib: enable lzma decompression support for SPL build Stefan Roese
2020-04-08 8:09 ` [PATCH 15/26 v6] Makefile: add support to generate LZMA compressed u-boot image Stefan Roese
2020-04-08 8:09 ` [PATCH 16/26 v6] tools: binman: add etype file for u-boot-lzma-img Stefan Roese
2020-04-08 8:09 ` [PATCH 17/26 v6] spl: Extract legacy image handling into separate file Stefan Roese
2020-04-08 8:09 ` [PATCH 18/26 v6] spl: spl_legacy: Use IS_ENABLED() to remove #ifdef Stefan Roese
2020-04-08 8:09 ` [PATCH 19/26 v6] spl: spl_nor: Copy image header to local struct Stefan Roese
2020-04-09 7:24 ` Simon Goldschmidt
2020-04-08 8:09 ` [PATCH 20/26 v6] spl: spl_nor: Move legacy image loading into spl_legacy.c Stefan Roese
2020-04-09 18:51 ` Daniel Schwierzeck
2020-04-10 8:02 ` Stefan Roese
2020-04-08 8:09 ` [PATCH 21/26 v6] spl: spl_legacy: Add lzma decompression support for legacy image Stefan Roese
2020-04-08 8:09 ` [PATCH 22/26 v6] spl: spl_legacy: Add cache flush after reading U-Boot image Stefan Roese
2020-04-09 7:29 ` Simon Goldschmidt
2020-04-09 7:43 ` Stefan Roese
2020-04-09 16:47 ` Daniel Schwierzeck
2020-04-10 7:50 ` Stefan Roese
2020-04-09 18:15 ` Simon Goldschmidt
2020-04-08 8:09 ` [PATCH 23/26 v6] mips: mtmips: add SPL support Stefan Roese
2020-04-08 8:09 ` [PATCH 24/26 v6] mips: mtmips: enable SPL for all boards Stefan Roese
2020-04-08 8:09 ` [PATCH 25/26 v6] mips: mtmips: add support for mt7628-rfb Stefan Roese
2020-04-08 8:09 ` [PATCH 26/26 v6] mips: mtmips: Increase CONFIG_SPL_SYS_MALLOC_F_LEN Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200408080942.7694-6-sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox