[PATCH 2/5] pmic: pfuze100: Change error message level to debug

Fabio Estevam
2020-04-17T00:10:45Z

On systems that can run on multiple board variants, such as wandboard,
which versions with and without the PMIC populated, it is not useful
to get PMIC error on systems that do not have the PMIC populated.

Change error message level to debug instead.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
drivers/power/pmic/pfuze100.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/power/pmic/pfuze100.c b/drivers/power/pmic/pfuze100.c
index 6cf5f35f0f..db630f3ad0 100644
--- a/drivers/power/pmic/pfuze100.c
+++ b/drivers/power/pmic/pfuze100.c
@@ -41,7 +41,7 @@ static int pfuze100_write(struct udevice *dev, uint reg, const uint8_t *buff,
static int pfuze100_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
{
if (dm_i2c_read(dev, reg, buff, len)) {
- pr_err("read error from device: %p register: %#x!\n", dev, reg);
+ debug("read error from device: %p register: %#x!\n", dev, reg);
return -EIO;
}

--
2.17.1