From mboxrd@z Thu Jan 1 00:00:00 1970 From: sbabic at denx.de Date: Sat, 18 Apr 2020 12:51:05 +0200 (CEST) Subject: [PATCH v3] arm: imx6: configure NoC on i.MX6DQP In-Reply-To: <20200309095534.376249-1-bernhard.messerklinger@br-automation.com> Message-ID: <20200418105105.568C581C47@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > The i.MX6DP and i.MX6QP incorporate NoC interconnect logic > which needs to be configured in order to use external DDR memory. > This patch enables the SPL to configure the necessary registers > in accordance with the NXP engineering bulletin EB828. > Co-developed-by: Filip Brozovi? > Signed-off-by: Bernhard Messerklinger > Signed-off-by: Filip Brozovic Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================