[PATCH] mx6ulz_14x14_evk: Disable CONFIG_NET

[PATCH] mx6ulz_14x14_evk: Disable CONFIG_NET

[Fabio Estevam]

Currently the following build warning is seen:
    
===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
===================================================

Since the mx6ulz-evk board does not have networking support, explicitly
disable networking to avoid the board removal.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
 configs/mx6ulz_14x14_evk_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/mx6ulz_14x14_evk_defconfig b/configs/mx6ulz_14x14_evk_defconfig
index b854c36c77..92d73a85c8 100644
--- a/configs/mx6ulz_14x14_evk_defconfig
+++ b/configs/mx6ulz_14x14_evk_defconfig
@@ -29,6 +29,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6ulz-14x14-evk"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+# CONFIG_NET is not set
 CONFIG_DM_74X164=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
-- 
2.17.1

[PATCH] mx6ulz_14x14_evk: Disable CONFIG_NET

[sbabic at denx.de]

> Currently the following build warning is seen:
>     
> ===================== WARNING ======================
> This board does not use CONFIG_DM_ETH (Driver Model
> for Ethernet drivers). Please update the board to use
> CONFIG_DM_ETH before the v2020.07 release. Failure to
> update by the deadline may result in board removal.
> See doc/driver-model/migration.rst for more info.
> ===================================================
> Since the mx6ulz-evk board does not have networking support, explicitly
> disable networking to avoid the board removal.
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================