From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [PATCH 07/26 v7] configs: enable CONFIG_RESTORE_EXCEPTION_VECTOR_BASE for all mtmips boards
Date: Tue, 21 Apr 2020 09:28:31 +0200 [thread overview]
Message-ID: <20200421072850.4970-8-sr@denx.de> (raw)
In-Reply-To: <20200421072850.4970-1-sr@denx.de>
From: Weijie Gao <weijie.gao@mediatek.com>
This patch enables CONFIG_RESTORE_EXCEPTION_VECTOR_BASE for all mtmips
boards.
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
---
Changes since v3: none
configs/gardena-smart-gateway-mt7688-ram_defconfig | 1 +
configs/gardena-smart-gateway-mt7688_defconfig | 1 +
configs/linkit-smart-7688-ram_defconfig | 1 +
configs/linkit-smart-7688_defconfig | 1 +
4 files changed, 4 insertions(+)
diff --git a/configs/gardena-smart-gateway-mt7688-ram_defconfig b/configs/gardena-smart-gateway-mt7688-ram_defconfig
index 5e10a4051e..48b7a43633 100644
--- a/configs/gardena-smart-gateway-mt7688-ram_defconfig
+++ b/configs/gardena-smart-gateway-mt7688-ram_defconfig
@@ -8,6 +8,7 @@ CONFIG_NR_DRAM_BANKS=1
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
CONFIG_ENV_OFFSET_REDUND=0xB0000
CONFIG_ARCH_MTMIPS=y
+CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
diff --git a/configs/gardena-smart-gateway-mt7688_defconfig b/configs/gardena-smart-gateway-mt7688_defconfig
index 7a496fe5b3..7f040f5762 100644
--- a/configs/gardena-smart-gateway-mt7688_defconfig
+++ b/configs/gardena-smart-gateway-mt7688_defconfig
@@ -11,6 +11,7 @@ CONFIG_ARCH_MTMIPS=y
CONFIG_BOOT_ROM=y
CONFIG_ONBOARD_DDR2_SIZE_1024MBIT=y
CONFIG_ONBOARD_DDR2_CHIP_WIDTH_16BIT=y
+CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
diff --git a/configs/linkit-smart-7688-ram_defconfig b/configs/linkit-smart-7688-ram_defconfig
index 7f29617ddc..1db94db41f 100644
--- a/configs/linkit-smart-7688-ram_defconfig
+++ b/configs/linkit-smart-7688-ram_defconfig
@@ -6,6 +6,7 @@ CONFIG_ENV_OFFSET=0x80000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARCH_MTMIPS=y
CONFIG_BOARD_LINKIT_SMART_7688=y
+CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_FIT=y
diff --git a/configs/linkit-smart-7688_defconfig b/configs/linkit-smart-7688_defconfig
index 484c338348..7993976443 100644
--- a/configs/linkit-smart-7688_defconfig
+++ b/configs/linkit-smart-7688_defconfig
@@ -9,6 +9,7 @@ CONFIG_BOARD_LINKIT_SMART_7688=y
CONFIG_BOOT_ROM=y
CONFIG_ONBOARD_DDR2_SIZE_1024MBIT=y
CONFIG_ONBOARD_DDR2_CHIP_WIDTH_16BIT=y
+CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_FIT=y
--
2.26.2
next prev parent reply other threads:[~2020-04-21 7:28 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-21 7:28 [PATCH 00/26 v7] Refactor the architecture parts of mt7628 Stefan Roese
2020-04-21 7:28 ` [PATCH 01/26 v7] mips: add support to restore exception vector base before booting linux Stefan Roese
2020-04-21 7:28 ` [PATCH 02/26 v7] mips: mtmips: add predefined i-cache/d-cache size and linesize Stefan Roese
2020-04-21 7:28 ` [PATCH 03/26 v7] mips: add an option to support initialize SRAM for initial stack Stefan Roese
2020-04-21 7:28 ` [PATCH 04/26 v7] mips: start.S: avoid overwriting outside gd when clearing global data in stack Stefan Roese
2020-04-21 7:28 ` [PATCH 05/26 v7] sysreset: add reset controller based reboot driver Stefan Roese
2020-04-21 7:28 ` [PATCH 06/26 v7] mips: mtmips: make use of sysreset-resetctrl for mt7628 soc Stefan Roese
2020-04-21 7:28 ` Stefan Roese [this message]
2020-04-21 7:28 ` [PATCH 08/26 v7] mips: add a mtmips-specific field to architecture-specific global data Stefan Roese
2020-04-21 7:28 ` [PATCH 09/26 v7] mips: add a option to support not reserving malloc space on initial stack Stefan Roese
2020-04-21 7:28 ` [PATCH 10/26 v7] mips: mtmips: rewrite lowlevel codes of mt7628 Stefan Roese
2020-04-21 7:28 ` [PATCH 11/26 v7] dts: mtmips: add alternative pinmux node for uart2 Stefan Roese
2020-04-21 7:28 ` [PATCH 12/26 v7] mips: enable support for appending dtb to spl binary Stefan Roese
2020-04-21 7:28 ` [PATCH 13/26 v7] mips: add an option to enable u_boot_list section for SPL loaders in u-boot-spl.lds Stefan Roese
2020-04-21 7:28 ` [PATCH 14/26 v7] lib: enable lzma decompression support for SPL build Stefan Roese
2020-04-21 7:28 ` [PATCH 15/26 v7] Makefile: add support to generate LZMA compressed u-boot image Stefan Roese
2020-04-21 7:28 ` [PATCH 16/26 v7] tools: binman: add etype file for u-boot-lzma-img Stefan Roese
2020-04-21 7:28 ` [PATCH 17/26 v7] spl: Extract legacy image handling into separate file Stefan Roese
2020-04-23 19:28 ` Daniel Schwierzeck
2020-04-21 7:28 ` [PATCH 18/26 v7] spl: spl_legacy: Use IS_ENABLED() to remove #ifdef Stefan Roese
2020-04-23 19:28 ` Daniel Schwierzeck
2020-04-21 7:28 ` [PATCH 19/26 v7] spl: spl_nor: Move legacy image loading into spl_legacy.c Stefan Roese
2020-04-23 19:29 ` Daniel Schwierzeck
2020-04-21 7:28 ` [PATCH 20/26 v7] spl: spl_nor: Remove unused variable 'ret' warning Stefan Roese
2020-04-23 19:30 ` Daniel Schwierzeck
2020-04-21 7:28 ` [PATCH 21/26 v7] spl: spl_legacy: Add lzma decompression support for legacy image Stefan Roese
2020-04-21 7:28 ` [PATCH 22/26 v7] mips: spl: Flush cache before jumping to U-Boot proper Stefan Roese
2020-04-23 19:26 ` Daniel Schwierzeck
2020-04-21 7:28 ` [PATCH 23/26 v7] mips: mtmips: add SPL support Stefan Roese
2020-04-21 11:28 ` Daniel Schwierzeck
2020-04-21 11:34 ` Stefan Roese
2020-04-21 11:57 ` Daniel Schwierzeck
2020-04-21 12:04 ` Stefan Roese
2020-04-21 7:28 ` [PATCH 24/26 v7] mips: mtmips: enable SPL for all boards Stefan Roese
2020-04-21 7:28 ` [PATCH 25/26 v7] mips: mtmips: add support for mt7628-rfb Stefan Roese
2020-04-21 7:28 ` [PATCH 26/26 v7] mips: mtmips: Increase CONFIG_SPL_SYS_MALLOC_F_LEN Stefan Roese
2020-04-27 13:35 ` [PATCH 00/26 v7] Refactor the architecture parts of mt7628 Daniel Schwierzeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200421072850.4970-8-sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox