From mboxrd@z Thu Jan 1 00:00:00 1970 From: Giulio Benetti Date: Mon, 27 Apr 2020 17:11:04 +0200 Subject: [PATCH v2 1/4] imxrt1050-evk: README: fix dd command destination In-Reply-To: <20200427151107.101075-1-giulio.benetti@benettiengineering.com> References: <20200427151107.101075-1-giulio.benetti@benettiengineering.com> Message-ID: <20200427151107.101075-2-giulio.benetti@benettiengineering.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Make "of=" the same for the 2 commands since we're writing to the same sd-card. Signed-off-by: Giulio Benetti --- board/freescale/imxrt1050-evk/README | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/freescale/imxrt1050-evk/README b/board/freescale/imxrt1050-evk/README index f7e2894025..55b6a0877a 100644 --- a/board/freescale/imxrt1050-evk/README +++ b/board/freescale/imxrt1050-evk/README @@ -11,7 +11,7 @@ This will generate the SPL image called SPL and the u-boot.img. - Flash the SPL image into the micro SD card: -sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync +sudo dd if=SPL of=/dev/sdb bs=1k seek=1; sync - Flash the u-boot.img image into the micro SD card: -- 2.20.1