From mboxrd@z Thu Jan 1 00:00:00 1970 From: Giulio Benetti Date: Mon, 27 Apr 2020 17:53:03 +0200 Subject: [PATCH v3 1/4] imxrt1050-evk: README: change dd command destination In-Reply-To: <20200427155306.105284-1-giulio.benetti@benettiengineering.com> References: <20200427155306.105284-1-giulio.benetti@benettiengineering.com> Message-ID: <20200427155306.105284-2-giulio.benetti@benettiengineering.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Set dd "of=" to "of=/dev/sdX" to be generic and prevent host hard drive damage. Signed-off-by: Giulio Benetti --- V2->V3: * change /dev/sdb to /dev/sdX as suggested by Fabio --- board/freescale/imxrt1050-evk/README | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/board/freescale/imxrt1050-evk/README b/board/freescale/imxrt1050-evk/README index f7e2894025..a7e68fa9b3 100644 --- a/board/freescale/imxrt1050-evk/README +++ b/board/freescale/imxrt1050-evk/README @@ -11,11 +11,11 @@ This will generate the SPL image called SPL and the u-boot.img. - Flash the SPL image into the micro SD card: -sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync +sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync - Flash the u-boot.img image into the micro SD card: -sudo dd if=u-boot.img of=/dev/sdb bs=1k seek=128; sync +sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128; sync - Jumper settings: -- 2.20.1