From: Dan Murphy <dmurphy@ti.com>
To: u-boot@lists.denx.de
Subject: [PATCH v2 3/3] net: phy: Add DP8382x phy registration to TI PHY init
Date: Tue, 28 Apr 2020 14:26:06 -0500 [thread overview]
Message-ID: <20200428192606.1808-4-dmurphy@ti.com> (raw)
In-Reply-To: <20200428192606.1808-1-dmurphy@ti.com>
Add the DP8382X generic PHY registration to the TI PHY init file.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
drivers/net/phy/ti_phy_init.c | 91 +++++++++++++++++++++++++++++++++++
1 file changed, 91 insertions(+)
diff --git a/drivers/net/phy/ti_phy_init.c b/drivers/net/phy/ti_phy_init.c
index 277b29a26342..47f32a528361 100644
--- a/drivers/net/phy/ti_phy_init.c
+++ b/drivers/net/phy/ti_phy_init.c
@@ -7,12 +7,103 @@
* Copyright (C) 2019-20 Texas Instruments Inc.
*/
+
+#include <phy.h>
#include "ti_phy_init.h"
+#define DP83822_PHY_ID 0x2000a240
+#define DP83825S_PHY_ID 0x2000a140
+#define DP83825I_PHY_ID 0x2000a150
+#define DP83825CM_PHY_ID 0x2000a160
+#define DP83825CS_PHY_ID 0x2000a170
+#define DP83826C_PHY_ID 0x2000a130
+#define DP83826NC_PHY_ID 0x2000a110
+
+#ifdef CONFIG_PHY_TI_GENERIC
+static struct phy_driver dp83822_driver = {
+ .name = "TI DP83822",
+ .uid = DP83822_PHY_ID,
+ .mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &genphy_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver dp83825s_driver = {
+ .name = "TI DP83825S",
+ .uid = DP83825S_PHY_ID,
+ .mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &genphy_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver dp83825i_driver = {
+ .name = "TI DP83825I",
+ .uid = DP83825I_PHY_ID,
+ .mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &genphy_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver dp83825m_driver = {
+ .name = "TI DP83825M",
+ .uid = DP83825CM_PHY_ID,
+ .mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &genphy_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver dp83825cs_driver = {
+ .name = "TI DP83825CS",
+ .uid = DP83825CS_PHY_ID,
+ .mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &genphy_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver dp83826c_driver = {
+ .name = "TI DP83826C",
+ .uid = DP83826C_PHY_ID,
+ .mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &genphy_startup,
+ .shutdown = &genphy_shutdown,
+};
+static struct phy_driver dp83826nc_driver = {
+ .name = "TI DP83826NC",
+ .uid = DP83826NC_PHY_ID,
+ .mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &genphy_startup,
+ .shutdown = &genphy_shutdown,
+};
+#endif /* CONFIG_PHY_TI_GENERIC */
+
int phy_ti_init(void)
{
#ifdef CONFIG_PHY_TI_DP83867
phy_dp83867_init();
#endif
+
+#ifdef CONFIG_PHY_TI_GENERIC
+ phy_register(&dp83822_driver);
+ phy_register(&dp83825s_driver);
+ phy_register(&dp83825i_driver);
+ phy_register(&dp83825m_driver);
+ phy_register(&dp83825cs_driver);
+ phy_register(&dp83826c_driver);
+ phy_register(&dp83826nc_driver);
+#endif
return 0;
}
--
2.25.1
next prev parent reply other threads:[~2020-04-28 19:26 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-28 19:26 [PATCH v2 0/3] TI Ethernet PHY changes Dan Murphy
2020-04-28 19:26 ` [PATCH v2 1/3] net: phy: Add helper routines to set and clear bits Dan Murphy
2020-04-30 8:00 ` Michal Simek
2020-04-30 11:43 ` Dan Murphy
2020-04-28 19:26 ` [PATCH v2 2/3] net: phy: Add support for TI PHY init Dan Murphy
2020-04-30 8:01 ` Michal Simek
2020-04-28 19:26 ` Dan Murphy [this message]
2020-04-30 8:04 ` [PATCH v2 3/3] net: phy: Add DP8382x phy registration to " Michal Simek
2020-04-30 11:47 ` Dan Murphy
2020-04-30 12:14 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200428192606.1808-4-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox