[PATCH v2 3/8] clk: rk3399: Add enable/disable clks

public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed

From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [PATCH v2 3/8] clk: rk3399: Add enable/disable clks
Date: Thu, 30 Apr 2020 12:34:07 +0530	[thread overview]
Message-ID: <20200430070412.12499-4-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20200430070412.12499-1-jagan@amarulasolutions.com>

Yes, most of the high speed peripheral clocks
in rk3399 enabled by default.

But it would be better to handle them via clk
enable/disable API for handling proper reset
conditions like 'usb reset' over command line.

So, enable USB, GMAC clock via enable/disable ops.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- new patch

 drivers/clk/rockchip/clk_rk3399.c | 148 ++++++++++++++++++++++++++++++
 1 file changed, 148 insertions(+)

diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c
index d822acace1..df70e9fa88 100644
--- a/drivers/clk/rockchip/clk_rk3399.c
+++ b/drivers/clk/rockchip/clk_rk3399.c
@@ -1071,12 +1071,160 @@ static int __maybe_unused rk3399_clk_set_parent(struct clk *clk,
 	return -ENOENT;
 }
 
+static int rk3399_clk_enable(struct clk *clk)
+{
+	struct rk3399_clk_priv *priv = dev_get_priv(clk->dev);
+
+	switch (clk->id) {
+	case SCLK_MAC:
+		rk_clrreg(&priv->cru->clkgate_con[5], BIT(5));
+		break;
+	case SCLK_MAC_RX:
+		rk_clrreg(&priv->cru->clkgate_con[5], BIT(8));
+		break;
+	case SCLK_MAC_TX:
+		rk_clrreg(&priv->cru->clkgate_con[5], BIT(9));
+		break;
+	case SCLK_MACREF:
+		rk_clrreg(&priv->cru->clkgate_con[5], BIT(7));
+		break;
+	case SCLK_MACREF_OUT:
+		rk_clrreg(&priv->cru->clkgate_con[5], BIT(6));
+		break;
+	case ACLK_GMAC:
+		rk_clrreg(&priv->cru->clkgate_con[32], BIT(0));
+		break;
+	case PCLK_GMAC:
+		rk_clrreg(&priv->cru->clkgate_con[32], BIT(2));
+		break;
+	case SCLK_USB3OTG0_REF:
+		rk_clrreg(&priv->cru->clksel_con[12], BIT(1));
+		break;
+	case SCLK_USB3OTG1_REF:
+		rk_clrreg(&priv->cru->clksel_con[12], BIT(2));
+		break;
+	case SCLK_USB3OTG0_SUSPEND:
+		rk_clrreg(&priv->cru->clkgate_con[12], BIT(3));
+		break;
+	case SCLK_USB3OTG1_SUSPEND:
+		rk_clrreg(&priv->cru->clkgate_con[12], BIT(4));
+		break;
+	case ACLK_USB3OTG0:
+		rk_clrreg(&priv->cru->clkgate_con[30], BIT(1));
+		break;
+	case ACLK_USB3OTG1:
+		rk_clrreg(&priv->cru->clkgate_con[30], BIT(2));
+		break;
+	case ACLK_USB3_RKSOC_AXI_PERF:
+		rk_clrreg(&priv->cru->clkgate_con[30], BIT(3));
+		break;
+	case ACLK_USB3:
+		rk_clrreg(&priv->cru->clkgate_con[12], BIT(0));
+		break;
+	case ACLK_USB3_GRF:
+		rk_clrreg(&priv->cru->clkgate_con[30], BIT(4));
+		break;
+	case HCLK_HOST0:
+		rk_clrreg(&priv->cru->clksel_con[20], BIT(5));
+		break;
+	case HCLK_HOST0_ARB:
+		rk_clrreg(&priv->cru->clksel_con[20], BIT(6));
+		break;
+	case HCLK_HOST1:
+		rk_clrreg(&priv->cru->clksel_con[20], BIT(7));
+		break;
+	case HCLK_HOST1_ARB:
+		rk_clrreg(&priv->cru->clksel_con[20], BIT(8));
+		break;
+	default:
+		debug("%s: unsupported clk %ld\n", __func__, clk->id);
+		return -ENOENT;
+	}
+
+	return 0;
+}
+
+static int rk3399_clk_disable(struct clk *clk)
+{
+	struct rk3399_clk_priv *priv = dev_get_priv(clk->dev);
+
+	switch (clk->id) {
+	case SCLK_MAC:
+		rk_setreg(&priv->cru->clkgate_con[5], BIT(5));
+		break;
+	case SCLK_MAC_RX:
+		rk_setreg(&priv->cru->clkgate_con[5], BIT(8));
+		break;
+	case SCLK_MAC_TX:
+		rk_setreg(&priv->cru->clkgate_con[5], BIT(9));
+		break;
+	case SCLK_MACREF:
+		rk_setreg(&priv->cru->clkgate_con[5], BIT(7));
+		break;
+	case SCLK_MACREF_OUT:
+		rk_setreg(&priv->cru->clkgate_con[5], BIT(6));
+		break;
+	case ACLK_GMAC:
+		rk_setreg(&priv->cru->clkgate_con[32], BIT(0));
+		break;
+	case PCLK_GMAC:
+		rk_setreg(&priv->cru->clkgate_con[32], BIT(2));
+		break;
+	case SCLK_USB3OTG0_REF:
+		rk_setreg(&priv->cru->clksel_con[12], BIT(1));
+		break;
+	case SCLK_USB3OTG1_REF:
+		rk_setreg(&priv->cru->clksel_con[12], BIT(2));
+		break;
+	case SCLK_USB3OTG0_SUSPEND:
+		rk_setreg(&priv->cru->clkgate_con[12], BIT(3));
+		break;
+	case SCLK_USB3OTG1_SUSPEND:
+		rk_setreg(&priv->cru->clkgate_con[12], BIT(4));
+		break;
+	case ACLK_USB3OTG0:
+		rk_setreg(&priv->cru->clkgate_con[30], BIT(1));
+		break;
+	case ACLK_USB3OTG1:
+		rk_setreg(&priv->cru->clkgate_con[30], BIT(2));
+		break;
+	case ACLK_USB3_RKSOC_AXI_PERF:
+		rk_setreg(&priv->cru->clkgate_con[30], BIT(3));
+		break;
+	case ACLK_USB3:
+		rk_setreg(&priv->cru->clkgate_con[12], BIT(0));
+		break;
+	case ACLK_USB3_GRF:
+		rk_setreg(&priv->cru->clkgate_con[30], BIT(4));
+		break;
+	case HCLK_HOST0:
+		rk_setreg(&priv->cru->clksel_con[20], BIT(5));
+		break;
+	case HCLK_HOST0_ARB:
+		rk_setreg(&priv->cru->clksel_con[20], BIT(6));
+		break;
+	case HCLK_HOST1:
+		rk_setreg(&priv->cru->clksel_con[20], BIT(7));
+		break;
+	case HCLK_HOST1_ARB:
+		rk_setreg(&priv->cru->clksel_con[20], BIT(8));
+		break;
+	default:
+		debug("%s: unsupported clk %ld\n", __func__, clk->id);
+		return -ENOENT;
+	}
+
+	return 0;
+}
+
 static struct clk_ops rk3399_clk_ops = {
 	.get_rate = rk3399_clk_get_rate,
 	.set_rate = rk3399_clk_set_rate,
 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
 	.set_parent = rk3399_clk_set_parent,
 #endif
+	.enable = rk3399_clk_enable,
+	.disable = rk3399_clk_disable,
 };
 
 #ifdef CONFIG_SPL_BUILD
-- 
2.17.1

next prev parent reply	other threads:[~2020-04-30  7:04 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-30  7:04 [PATCH v2 0/8] rockchip: Add PCIe host support Jagan Teki
2020-04-30  7:04 ` [PATCH v2 1/8] iopoll: Add dealy to read poll Jagan Teki
2020-04-30 14:46   ` Tom Rini
2020-04-30 21:03     ` Jagan Teki
2020-04-30 22:06       ` Tom Rini
2020-05-01 14:52         ` Jagan Teki
2020-04-30  7:04 ` [PATCH v2 2/8] iopoll: Add readl_poll_sleep_timeout Jagan Teki
2020-04-30  7:04 ` Jagan Teki [this message]
2020-04-30  7:04 ` [PATCH v2 4/8] clk: rk3399: Enable/Disable the PCIEPHY clk Jagan Teki
2020-04-30  7:04 ` [PATCH v2 5/8] pci: Add Rockchip PCIe controller driver Jagan Teki
2020-04-30  7:04 ` [PATCH v2 6/8] pci: Add Rockchip PCIe PHY " Jagan Teki
2020-04-30  7:04 ` [PATCH v2 7/8] rockchip: Enable PCIe/M.2 on rk3399 board w/ M.2 Jagan Teki
2020-04-30  7:04 ` [PATCH v2 8/8] rockchip: Enable PCIe/M.2 on rock960 board Jagan Teki
2020-05-03 13:39   ` Manivannan Sadhasivam
2020-05-09 16:46     ` Jagan Teki

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:d822acace dfblob:df70e9fa8 )
 OR (
bs:"[PATCH v2 3/8] clk: rk3399: Add enable/disable clks" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200430070412.12499-4-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox