From mboxrd@z Thu Jan  1 00:00:00 1970
From: sbabic at denx.de <sbabic@denx.de>
Date: Fri,  1 May 2020 18:31:16 +0200 (CEST)
Subject: [PATCH v2 3/5] verdin-imx8mm: Change board phy skew values for our
 ksz9031
In-Reply-To: <20200311105926.1610-4-philippe.schenker@toradex.com>
Message-ID: <20200501163116.1452981CCC@phobos.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> This patches uses the existing functions for interacting with the
> KSZ9031 and uses the values appropriate for our board.
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> Tested-by: Igor Opaniuk <igor.opaniuk@toradex.com>
> Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================