From mboxrd@z Thu Jan 1 00:00:00 1970 From: sbabic at denx.de Date: Fri, 1 May 2020 18:32:56 +0200 (CEST) Subject: [PATCH v2 4/5] board: verdin-imx8mm: Add KSZ9131 phy skew settings In-Reply-To: <20200311105926.1610-5-philippe.schenker@toradex.com> Message-ID: <20200501163256.8B43081CE3@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > This patch determines which phy is placed on the board with the PHY ID > then it sets the same settings for KSZ9031 as before but for KSZ9131 > it enables both RXC and TXC delay lines in the PHY. > This will compensate the missing delay from the MAC. Other skew > settings are not needed as the traces on board are routed exactly the > same length > Signed-off-by: Philippe Schenker > Tested-by: Igor Opaniuk > Acked-by: Igor Opaniuk Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================