From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [PATCH v2 7/7] usb: dwc3: add dis_del_phy_power_chg_quirk
Date: Wed, 6 May 2020 13:20:25 +0530 [thread overview]
Message-ID: <20200506075025.1677-8-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20200506075025.1677-1-jagan@amarulasolutions.com>
Add a quirk to clear the GUSB3PIPECTL.DELAYP1TRANS bit,
which specifies whether disable delay PHY power change
from P0 to P1/P2/P3 when link state changing from U0
to U1/U2/U3 respectively.
Reference from below Linux commit,
commit <00fe081dc3a3> ("usb: dwc3: add dis_del_phy_power_chg_quirk")
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- new patch
drivers/usb/dwc3/core.c | 6 ++++++
drivers/usb/dwc3/core.h | 1 +
include/dwc3-uboot.h | 1 +
3 files changed, 8 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 4ec3f6df6a..6e438e5604 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -377,6 +377,9 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->dis_u3_susphy_quirk)
reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
+ if (dwc->dis_del_phy_power_chg_quirk)
+ reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
+
dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
mdelay(100);
@@ -715,6 +718,7 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
dwc->rx_detect_poll_quirk = dwc3_dev->rx_detect_poll_quirk;
dwc->dis_u3_susphy_quirk = dwc3_dev->dis_u3_susphy_quirk;
dwc->dis_u2_susphy_quirk = dwc3_dev->dis_u2_susphy_quirk;
+ dwc->dis_del_phy_power_chg_quirk = dwc3_dev->dis_del_phy_power_chg_quirk;
dwc->tx_de_emphasis_quirk = dwc3_dev->tx_de_emphasis_quirk;
if (dwc3_dev->tx_de_emphasis)
@@ -975,6 +979,8 @@ void dwc3_of_parse(struct dwc3 *dwc)
"snps,dis_u3_susphy_quirk");
dwc->dis_u2_susphy_quirk = dev_read_bool(dev,
"snps,dis_u2_susphy_quirk");
+ dwc->dis_del_phy_power_chg_quirk = dev_read_bool(dev,
+ "snps,dis-del-phy-power-chg-quirk");
dwc->tx_de_emphasis_quirk = dev_read_bool(dev,
"snps,tx_de_emphasis_quirk");
tmp = dev_read_u8_array_ptr(dev, "snps,tx_de_emphasis", 1);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 1c08a2c5b6..7f45a9c459 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -821,6 +821,7 @@ struct dwc3 {
unsigned rx_detect_poll_quirk:1;
unsigned dis_u3_susphy_quirk:1;
unsigned dis_u2_susphy_quirk:1;
+ unsigned dis_del_phy_power_chg_quirk:1;
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
diff --git a/include/dwc3-uboot.h b/include/dwc3-uboot.h
index 3c9e204cf0..f5086fb946 100644
--- a/include/dwc3-uboot.h
+++ b/include/dwc3-uboot.h
@@ -32,6 +32,7 @@ struct dwc3_device {
unsigned rx_detect_poll_quirk;
unsigned dis_u3_susphy_quirk;
unsigned dis_u2_susphy_quirk;
+ unsigned dis_del_phy_power_chg_quirk;
unsigned tx_de_emphasis_quirk;
unsigned tx_de_emphasis;
int index;
--
2.17.1
next prev parent reply other threads:[~2020-05-06 7:50 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-06 7:50 [PATCH v2 0/7] rockchip: PHY drivers (USB) Jagan Teki
2020-05-06 7:50 ` [PATCH v2 1/7] clk: rk3399: Enable/Disable the USB2PHY clk Jagan Teki
2020-05-06 7:50 ` [PATCH v2 2/7] clk: rk3399: Set empty for TCPHY assigned-clocks Jagan Teki
2020-05-06 7:50 ` [PATCH v2 3/7] clk: rk3399: Enable/Disable TCPHY clocks Jagan Teki
2020-05-06 7:50 ` [PATCH v2 4/7] phy: rockchip: Add Rockchip USB2PHY driver Jagan Teki
2020-05-06 7:50 ` [PATCH v2 5/7] arm64: dts: rk3399: Move u2phy into root port Jagan Teki
2020-05-06 7:50 ` [PATCH v2 6/7] phy: rockchip: Add Rockchip USB TypeC PHY driver Jagan Teki
2020-05-06 7:50 ` Jagan Teki [this message]
2020-05-06 11:44 ` [PATCH v2 7/7] usb: dwc3: add dis_del_phy_power_chg_quirk Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200506075025.1677-8-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox