From: Chris Packham <judge.packham@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH 2/2] mv_ddr: ddr3: Update {min,max}_read_sample calculation
Date: Wed, 27 May 2020 13:31:30 +1200 [thread overview]
Message-ID: <20200527013131.1663-3-judge.packham@gmail.com> (raw)
In-Reply-To: <20200527013131.1663-1-judge.packham@gmail.com>
From: Chris Packham <chris.packham@alliedtelesis.co.nz>
Measurements on actual hardware shown that the read ODT is early by 3
clocks. Adjust the calculation to avoid this.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
[upstream https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/22]
Signed-off-by: Chris Packham <judge.packham@gmail.com>
---
drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c b/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c
index ce9a47fc2ce0..58ffb205072e 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c
@@ -91,8 +91,8 @@ int ddr3_tip_write_additional_odt_setting(u32 dev_num, u32 if_id)
min_read_sample = read_sample[cs_num];
}
- min_read_sample = min_read_sample - 1;
- max_read_sample = max_read_sample + 4 + (max_phase + 1) / 2 + 1;
+ min_read_sample = min_read_sample + 2;
+ max_read_sample = max_read_sample + 7 + (max_phase + 1) / 2 + 1;
if (min_read_sample >= 0xf)
min_read_sample = 0xf;
if (max_read_sample >= 0x1f)
--
2.25.1
next prev parent reply other threads:[~2020-05-27 1:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 1:31 [PATCH 0/2] mvebu: ddr3: Armada-385 read ODT configuration Chris Packham
2020-05-27 1:31 ` [PATCH 1/2] mv_ddr: ddr3: Use correct bitmask for read sample delay Chris Packham
2020-05-27 5:41 ` Stefan Roese
2020-05-27 1:31 ` Chris Packham [this message]
2020-05-27 4:50 ` [PATCH 2/2] mv_ddr: ddr3: Update {min, max}_read_sample calculation Baruch Siach
2020-05-27 5:41 ` [PATCH 2/2] mv_ddr: ddr3: Update {min,max}_read_sample calculation Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200527013131.1663-3-judge.packham@gmail.com \
--to=judge.packham@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox