[PATCH v2 0/2] ARM: at91: Allow running SPL with DTB append

Eugen.Hristev at microchip.com
2020-06-18T11:30:47Z

On 05.06.2020 11:43, Gregory CLEMENT wrote:
> Hello,
>
> a few months ago I submitted a small series allowing to run SPL with
> DTB append. Indeed according to the linker BSS section was all the
> time separated for SPL but the symbol SPL_SEPARATE_BSS was only
> enabled on some boards.
>
> In this v2 the changes are:
> - add reviewed-by Stefan Roese <sr@denx.de>
> - modify a new defconfig sama5d3_xplained_nandflash_defconfig
>
> Thanks,
>
> Gregory
>
>
> Gregory CLEMENT (2):
> ARM: at91: Enable SPL_SEPARATE_BSS by default
> configs: atmel: cleanup CONFIG_SPL_SEPARATE_BSS
>
> arch/arm/Kconfig | 1 +
> configs/gardena-smart-gateway-at91sam_defconfig | 1 -
> configs/sama5d27_som1_ek_mmc1_defconfig | 1 -
> configs/sama5d27_som1_ek_mmc_defconfig | 1 -
> configs/sama5d27_som1_ek_qspiflash_defconfig | 1 -
> configs/sama5d27_wlsom1_ek_mmc_defconfig | 1 -
> configs/sama5d27_wlsom1_ek_qspiflash_defconfig | 1 -
> configs/sama5d2_icp_mmc_defconfig | 1 -
> configs/sama5d2_xplained_emmc_defconfig | 1 -
> configs/sama5d2_xplained_mmc_defconfig | 1 -
> configs/sama5d2_xplained_qspiflash_defconfig | 1 -
> configs/sama5d3_xplained_mmc_defconfig | 1 -
> configs/sama5d3xek_mmc_defconfig | 1 -
> configs/sama5d4_xplained_mmc_defconfig | 1 -
> configs/sama5d4ek_mmc_defconfig | 1 -
> 15 files changed, 1 insertion(+), 14 deletions(-)
>
> --
> 2.26.2
>

Applied to u-boot-atmel/master,
Thanks!