[PATCH v4 1/4] Makefile: Drop to handle rkspi image type

Jagan Teki
2020-06-08T18:17:05Z

On rockchip platforms, SPI boot image creation is not
straightforward like MMC boot image creation where former
requires to specify tpl, spl in multimage format in mkimage,
and later simply do a concatenate mkimaged-tpl with spl.

On this note, let drop rkspi image type creation via kbuild
and let inform via rockchip.rst

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v4:
- none

Makefile | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/Makefile b/Makefile
index 3851dd9fa0..db3b6b9991 100644
--- a/Makefile
+++ b/Makefile
@@ -1438,22 +1438,15 @@ u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE

ifeq ($(CONFIG_ARCH_ROCKCHIP),y)

-# rockchip image type
-ifeq ($(CONFIG_SPL_SPI_LOAD),y)
-ROCKCHIP_IMG_TYPE := rkspi
-else
-ROCKCHIP_IMG_TYPE := rksd
-endif
-
# TPL + SPL
ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy)
-MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE)
+MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T rksd
tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE
$(call if_changed,mkimage)
idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE
$(call if_changed,cat)
else
-MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE)
+MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T rksd
idbloader.img: spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
endif
--
2.20.1