[PATCH v3 4/5] rockchip: Separate the reset cause from display cpuinfo

[Jagan Teki <jagan@amarulasolutions.com>]

reset cause is a generic functionality based on the soc
cru registers in rockchip. This can be used for printing
the cause of reset in cpuinfo or some other place where
reset cause is needed.?

Other than cpuinfo, reset cause can also be using during
bootcount for checking the specific reset cause and glow
the led based on the reset cause.

So, let's separate the reset cause code from cpuinfo, and
add a check to build it for rk3399, rk3288 since these two
soc are supporting reset cause as of now.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com>
---
Changes for v3:
- none

 arch/arm/include/asm/arch-rockchip/cru.h |  2 ++
 arch/arm/mach-rockchip/Makefile          |  5 ++++-
 arch/arm/mach-rockchip/cpu-info.c        | 20 ++++++++++++--------
 3 files changed, 18 insertions(+), 9 deletions(-)

diff --git a/arch/arm/include/asm/arch-rockchip/cru.h b/arch/arm/include/asm/arch-rockchip/cru.h
index 5eb17f9d55..317eb61049 100644
--- a/arch/arm/include/asm/arch-rockchip/cru.h
+++ b/arch/arm/include/asm/arch-rockchip/cru.h
@@ -31,4 +31,6 @@ enum {
 
 #define MHz		1000000
 
+char *get_reset_cause(void);
+
 #endif /* _ROCKCHIP_CLOCK_H */
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 5b38526fe0..ef4898e00c 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -15,6 +15,10 @@ obj-tpl-$(CONFIG_ROCKCHIP_PX30) += px30-board-tpl.o
 
 obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
 
+ifeq ($(CONFIG_ROCKCHIP_RK3288)$(CONFIG_ROCKCHIP_RK3399), y)
+obj-y += cpu-info.o
+endif
+
 ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
 
 # Always include boot_mode.o, as we bypass it (i.e. turn it off)
@@ -22,7 +26,6 @@ ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
 # we can have the preprocessor correctly recognise both 0x0 and 0
 # meaning "turn it off".
 obj-y += boot_mode.o
-obj-$(CONFIG_DISPLAY_CPUINFO) += cpu-info.o
 obj-$(CONFIG_ROCKCHIP_COMMON_BOARD) += board.o
 obj-$(CONFIG_MISC_INIT_R) += misc.o
 endif
diff --git a/arch/arm/mach-rockchip/cpu-info.c b/arch/arm/mach-rockchip/cpu-info.c
index 21ca9dedce..76a840e2c3 100644
--- a/arch/arm/mach-rockchip/cpu-info.c
+++ b/arch/arm/mach-rockchip/cpu-info.c
@@ -13,7 +13,7 @@
 #include <asm/arch-rockchip/hardware.h>
 #include <linux/err.h>
 
-static char *get_reset_cause(void)
+char *get_reset_cause(void)
 {
 	struct rockchip_cru *cru = rockchip_get_cru();
 	char *cause = NULL;
@@ -41,12 +41,6 @@ static char *get_reset_cause(void)
 		cause = "unknown reset";
 	}
 
-	/**
-	 * reset_reason env is used by rk3288, due to special use case
-	 * to figure it the boot behavior. so keep this as it is.
-	 */
-	env_set("reset_reason", cause);
-
 	/*
 	 * Clear glb_rst_st, so we can determine the last reset cause
 	 * for following resets.
@@ -56,12 +50,22 @@ static char *get_reset_cause(void)
 	return cause;
 }
 
+#ifdef CONFIG_DISPLAY_CPUINFO
 int print_cpuinfo(void)
 {
+	char *cause = get_reset_cause();
+
 	printf("SoC: Rockchip %s\n", CONFIG_SYS_SOC);
-	printf("Reset cause: %s\n", get_reset_cause());
+	printf("Reset cause: %s\n", cause);
+
+	/**
+	 * reset_reason env is used by rk3288, due to special use case
+	 * to figure it the boot behavior. so keep this as it is.
+	 */
+	env_set("reset_reason", cause);
 
 	/* TODO print operating temparature and clock */
 
 	return 0;
 }
+#endif
-- 
2.20.1