[PATCH 1/8] imx: convert embest boards to DM_VIDEO

[PATCH 1/8] imx: convert embest boards to DM_VIDEO

[Anatolij Gustschin]

Migration to DM_VIDEO driver is long overdue. Update defconfigs
to enable usage of converted ipuv3 driver DM configuration.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 configs/marsboard_defconfig     | 9 +++++++--
 configs/riotboard_defconfig     | 9 +++++++--
 configs/riotboard_spl_defconfig | 9 +++++++--
 3 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/configs/marsboard_defconfig b/configs/marsboard_defconfig
index 765a3ca2b6..9551c63f00 100644
--- a/configs/marsboard_defconfig
+++ b/configs/marsboard_defconfig
@@ -38,7 +38,12 @@ CONFIG_DM_THERMAL=y
 CONFIG_USB=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
+CONFIG_DM_VIDEO=y
+# CONFIG_BACKLIGHT is not set
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
+# CONFIG_PANEL is not set
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_OF_LIBFDT=y
diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig
index 73656017d1..d2160d7793 100644
--- a/configs/riotboard_defconfig
+++ b/configs/riotboard_defconfig
@@ -38,7 +38,12 @@ CONFIG_DM_THERMAL=y
 CONFIG_USB=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
+CONFIG_DM_VIDEO=y
+# CONFIG_BACKLIGHT is not set
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
+# CONFIG_PANEL is not set
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_OF_LIBFDT=y
diff --git a/configs/riotboard_spl_defconfig b/configs/riotboard_spl_defconfig
index 5ff8da0355..a7435c6427 100644
--- a/configs/riotboard_spl_defconfig
+++ b/configs/riotboard_spl_defconfig
@@ -48,8 +48,13 @@ CONFIG_DM_THERMAL=y
 CONFIG_USB=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
+CONFIG_DM_VIDEO=y
+# CONFIG_BACKLIGHT is not set
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
+# CONFIG_PANEL is not set
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_OF_LIBFDT=y
 CONFIG_SPL_OF_LIBFDT=y
-- 
2.17.1

[PATCH 2/8] imx: convert pico-imx6 to DM_VIDEO

[Anatolij Gustschin]

Update defconfig to enable usage of converted ipuv3
driver DM configuration.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
---
 configs/pico-imx6_defconfig | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/configs/pico-imx6_defconfig b/configs/pico-imx6_defconfig
index 0bc7e4fc95..503b47f2b1 100644
--- a/configs/pico-imx6_defconfig
+++ b/configs/pico-imx6_defconfig
@@ -73,5 +73,11 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
+# CONFIG_BACKLIGHT is not set
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
+# CONFIG_PANEL is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
-- 
2.17.1

[PATCH 3/8] imx: convert dms-ba16 boards to DM_VIDEO

[Anatolij Gustschin]

Migration to DM_VIDEO driver is long overdue. Update defconfigs
to enable usage of converted ipuv3 driver DM configuration.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Akshay Bhat <akshaybhat@timesys.com>
Cc: Ken Lin <Ken.Lin@advantech.com.tw>
---
 configs/dms-ba16-1g_defconfig        | 9 +++++++--
 configs/dms-ba16_defconfig           | 9 +++++++--
 include/configs/advantech_dms-ba16.h | 2 --
 3 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/configs/dms-ba16-1g_defconfig b/configs/dms-ba16-1g_defconfig
index 0739527037..64f3a0ff04 100644
--- a/configs/dms-ba16-1g_defconfig
+++ b/configs/dms-ba16-1g_defconfig
@@ -58,7 +58,12 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
+# CONFIG_BACKLIGHT is not set
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
+# CONFIG_PANEL is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_OF_LIBFDT=y
diff --git a/configs/dms-ba16_defconfig b/configs/dms-ba16_defconfig
index 03a2c59bad..b2e042c222 100644
--- a/configs/dms-ba16_defconfig
+++ b/configs/dms-ba16_defconfig
@@ -57,7 +57,12 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
+# CONFIG_BACKLIGHT is not set
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
+# CONFIG_PANEL is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_OF_LIBFDT=y
diff --git a/include/configs/advantech_dms-ba16.h b/include/configs/advantech_dms-ba16.h
index d44028d510..9cbdb1face 100644
--- a/include/configs/advantech_dms-ba16.h
+++ b/include/configs/advantech_dms-ba16.h
@@ -202,7 +202,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM        3
 
 /* Framebuffer */
-#ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
@@ -211,7 +210,6 @@
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
-#endif
 
 #define CONFIG_IMX6_PWM_PER_CLK         66000000
 
-- 
2.17.1

[PATCH 4/8] imx: convert cgtqmx6eval board to DM_VIDEO

[Anatolij Gustschin]

Migration to DM_VIDEO driver is long overdue. Update defconfig
to enable usage of converted ipuv3 driver DM configuration.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
---
 board/congatec/cgtqmx6eval/cgtqmx6eval.c | 5 +++++
 configs/cgtqmx6eval_defconfig            | 9 +++++++--
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c b/board/congatec/cgtqmx6eval/cgtqmx6eval.c
index 044cefd979..392a3f8f1d 100644
--- a/board/congatec/cgtqmx6eval/cgtqmx6eval.c
+++ b/board/congatec/cgtqmx6eval/cgtqmx6eval.c
@@ -627,6 +627,11 @@ int board_video_skip(void)
 	return 0;
 }
 
+int ipu_displays_init(void)
+{
+	return board_video_skip();
+}
+
 static void setup_display(void)
 {
 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
diff --git a/configs/cgtqmx6eval_defconfig b/configs/cgtqmx6eval_defconfig
index a934336f41..94c6e3d908 100644
--- a/configs/cgtqmx6eval_defconfig
+++ b/configs/cgtqmx6eval_defconfig
@@ -79,7 +79,12 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
+# CONFIG_BACKLIGHT is not set
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
+# CONFIG_PANEL is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_OF_LIBFDT=y
-- 
2.17.1

[PATCH 5/8] imx: convert mx6cuboxi board to DM_VIDEO

[Anatolij Gustschin]

Migration to DM_VIDEO driver is long overdue. Update defconfig
to enable usage of converted ipuv3 driver DM configuration.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
---
 configs/mx6cuboxi_defconfig | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig
index df7e4611a0..69783310c2 100644
--- a/configs/mx6cuboxi_defconfig
+++ b/configs/mx6cuboxi_defconfig
@@ -22,7 +22,7 @@ CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
 CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin  serial,usbkbd; setenv stdout serial,vga; setenv stderr serial,vga; else setenv stdin  serial; setenv stdout serial; setenv stderr serial; fi;"
+CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin  serial,usbkbd; setenv stdout serial,vidconsole; setenv stderr serial,vidconsole; else setenv stdin  serial; setenv stdout serial; setenv stderr serial; fi;"
 CONFIG_BOUNCE_BUFFER=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_FS_EXT4=y
@@ -59,6 +59,11 @@ CONFIG_DM_THERMAL=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_KEYBOARD=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
+# CONFIG_BACKLIGHT is not set
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
+# CONFIG_PANEL is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
-- 
2.17.1

[PATCH 6/8] imx: convert gwventana board to DM_VIDEO

[Anatolij Gustschin]

Migration to DM_VIDEO driver is long overdue. Update defconfigs
to enable usage of converted ipuv3 driver DM configuration.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
---
 configs/gwventana_emmc_defconfig   | 9 +++++++--
 configs/gwventana_gw5904_defconfig | 9 +++++++--
 configs/gwventana_nand_defconfig   | 9 +++++++--
 3 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig
index 639cb99862..1bfd1d2112 100644
--- a/configs/gwventana_emmc_defconfig
+++ b/configs/gwventana_emmc_defconfig
@@ -90,8 +90,13 @@ CONFIG_USB_ETH_CDC=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
+# CONFIG_BACKLIGHT is not set
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
+# CONFIG_PANEL is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_OF_LIBFDT=y
 CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig
index 67ea57c7fc..ad23670d03 100644
--- a/configs/gwventana_gw5904_defconfig
+++ b/configs/gwventana_gw5904_defconfig
@@ -94,8 +94,13 @@ CONFIG_USB_ETH_CDC=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
+# CONFIG_BACKLIGHT is not set
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
+# CONFIG_PANEL is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_OF_LIBFDT=y
 CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig
index f6e85b680b..a71c04fb7f 100644
--- a/configs/gwventana_nand_defconfig
+++ b/configs/gwventana_nand_defconfig
@@ -95,8 +95,13 @@ CONFIG_USB_ETH_CDC=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
+# CONFIG_BACKLIGHT is not set
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
+# CONFIG_PANEL is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_OF_LIBFDT=y
 CONFIG_FDT_FIXUP_PARTITIONS=y
-- 
2.17.1

[PATCH 7/8] imx: convert mx51evk board to DM_VIDEO

[Anatolij Gustschin]

Migration to DM_VIDEO driver is long overdue. Update defconfig
to enable usage of converted ipuv3 driver DM configuration.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
---
 configs/mx51evk_defconfig | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/configs/mx51evk_defconfig b/configs/mx51evk_defconfig
index dbc4d85a22..b8e3ba205f 100644
--- a/configs/mx51evk_defconfig
+++ b/configs/mx51evk_defconfig
@@ -36,7 +36,12 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
+# CONFIG_BACKLIGHT is not set
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
+# CONFIG_PANEL is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_OF_LIBFDT=y
-- 
2.17.1

[PATCH 8/8] imx: convert mx53loco board to DM_VIDEO

[Anatolij Gustschin]

Migration to DM_VIDEO driver is long overdue. Update defconfig
to enable usage of converted ipuv3 driver DM configuration.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Jason Liu <jason.hui.liu@nxp.com>
---
 configs/mx53loco_defconfig | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/configs/mx53loco_defconfig b/configs/mx53loco_defconfig
index e5d842a75d..40fab2016c 100644
--- a/configs/mx53loco_defconfig
+++ b/configs/mx53loco_defconfig
@@ -37,7 +37,12 @@ CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_MCS7830=y
 CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
+# CONFIG_BACKLIGHT is not set
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
+# CONFIG_PANEL is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_OF_LIBFDT=y
-- 
2.17.1

[PATCH 8/8] imx: convert mx53loco board to DM_VIDEO

[Jason Liu]

> -----Original Message-----
> From: Anatolij Gustschin <agust@denx.de>
> Sent: Tuesday, May 26, 2020 7:42 AM
> To: u-boot at lists.denx.de
> Cc: Jason Liu <jason.hui.liu@nxp.com>
> Subject: [PATCH 8/8] imx: convert mx53loco board to DM_VIDEO
> 
> Migration to DM_VIDEO driver is long overdue. Update defconfig to enable
> usage of converted ipuv3 driver DM configuration.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Jason Liu <jason.hui.liu@nxp.com>
> ---
>  configs/mx53loco_defconfig | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)


Acked-by: Jason Liu<jason.hui.liu@nxp.com>

> 
> diff --git a/configs/mx53loco_defconfig b/configs/mx53loco_defconfig index
> e5d842a75d..40fab2016c 100644
> --- a/configs/mx53loco_defconfig
> +++ b/configs/mx53loco_defconfig
> @@ -37,7 +37,12 @@ CONFIG_USB_HOST_ETHER=y
> CONFIG_USB_ETHER_ASIX=y  CONFIG_USB_ETHER_MCS7830=y
> CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_DM_VIDEO=y
>  CONFIG_VIDEO_IPUV3=y
> -CONFIG_VIDEO=y
> -# CONFIG_VIDEO_SW_CURSOR is not set
> +# CONFIG_BACKLIGHT is not set
> +# CONFIG_VIDEO_BPP8 is not set
> +# CONFIG_VIDEO_BPP32 is not set
> +# CONFIG_VIDEO_ANSI is not set
> +# CONFIG_PANEL is not set
> +CONFIG_SYS_WHITE_ON_BLACK=y
>  CONFIG_OF_LIBFDT=y
> --
> 2.17.1

[PATCH 1/8] imx: convert embest boards to DM_VIDEO

[Anatolij Gustschin]

On Tue, 26 May 2020 01:41:30 +0200
Anatolij Gustschin agust at denx.de wrote:

> Migration to DM_VIDEO driver is long overdue. Update defconfigs
> to enable usage of converted ipuv3 driver DM configuration.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  configs/marsboard_defconfig     | 9 +++++++--
>  configs/riotboard_defconfig     | 9 +++++++--
>  configs/riotboard_spl_defconfig | 9 +++++++--
>  3 files changed, 21 insertions(+), 6 deletions(-)

Applied to u-boot-video/next, thanks!

--
Anatolij

[PATCH 2/8] imx: convert pico-imx6 to DM_VIDEO

[Anatolij Gustschin]

On Tue, 26 May 2020 01:41:31 +0200
Anatolij Gustschin agust at denx.de wrote:

> Update defconfig to enable usage of converted ipuv3
> driver DM configuration.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Fabio Estevam <festevam@gmail.com>
> ---
>  configs/pico-imx6_defconfig | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)

Applied to u-boot-video/next, thanks!

--
Anatolij

[PATCH 3/8] imx: convert dms-ba16 boards to DM_VIDEO

[Anatolij Gustschin]

On Tue, 26 May 2020 01:41:32 +0200
Anatolij Gustschin agust at denx.de wrote:

> Migration to DM_VIDEO driver is long overdue. Update defconfigs
> to enable usage of converted ipuv3 driver DM configuration.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Akshay Bhat <akshaybhat@timesys.com>
> Cc: Ken Lin <Ken.Lin@advantech.com.tw>
> ---
>  configs/dms-ba16-1g_defconfig        | 9 +++++++--
>  configs/dms-ba16_defconfig           | 9 +++++++--
>  include/configs/advantech_dms-ba16.h | 2 --
>  3 files changed, 14 insertions(+), 6 deletions(-)

Applied to u-boot-video/next, thanks!

--
Anatolij

[PATCH 4/8] imx: convert cgtqmx6eval board to DM_VIDEO

[Anatolij Gustschin]

On Tue, 26 May 2020 01:41:33 +0200
Anatolij Gustschin agust at denx.de wrote:

> Migration to DM_VIDEO driver is long overdue. Update defconfig
> to enable usage of converted ipuv3 driver DM configuration.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Otavio Salvador <otavio@ossystems.com.br>
> ---
>  board/congatec/cgtqmx6eval/cgtqmx6eval.c | 5 +++++
>  configs/cgtqmx6eval_defconfig            | 9 +++++++--
>  2 files changed, 12 insertions(+), 2 deletions(-)

Applied to u-boot-video/next, thanks!

--
Anatolij

[PATCH 5/8] imx: convert mx6cuboxi board to DM_VIDEO

[Anatolij Gustschin]

On Tue, 26 May 2020 01:41:34 +0200
Anatolij Gustschin agust at denx.de wrote:

> Migration to DM_VIDEO driver is long overdue. Update defconfig
> to enable usage of converted ipuv3 driver DM configuration.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Baruch Siach <baruch@tkos.co.il>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> ---
>  configs/mx6cuboxi_defconfig | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)

Applied to u-boot-video/next, thanks!

--
Anatolij

[PATCH 6/8] imx: convert gwventana board to DM_VIDEO

[Anatolij Gustschin]

On Tue, 26 May 2020 01:41:35 +0200
Anatolij Gustschin agust at denx.de wrote:

> Migration to DM_VIDEO driver is long overdue. Update defconfigs
> to enable usage of converted ipuv3 driver DM configuration.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Tim Harvey <tharvey@gateworks.com>
> ---
>  configs/gwventana_emmc_defconfig   | 9 +++++++--
>  configs/gwventana_gw5904_defconfig | 9 +++++++--
>  configs/gwventana_nand_defconfig   | 9 +++++++--
>  3 files changed, 21 insertions(+), 6 deletions(-)

Applied to u-boot-video/next, thanks!

--
Anatolij

[PATCH 7/8] imx: convert mx51evk board to DM_VIDEO

[Anatolij Gustschin]

On Tue, 26 May 2020 01:41:36 +0200
Anatolij Gustschin agust at denx.de wrote:

> Migration to DM_VIDEO driver is long overdue. Update defconfig
> to enable usage of converted ipuv3 driver DM configuration.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
>  configs/mx51evk_defconfig | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)

Applied to u-boot-video/next, thanks!

--
Anatolij

[PATCH 8/8] imx: convert mx53loco board to DM_VIDEO

[Anatolij Gustschin]

On Tue, 26 May 2020 01:41:37 +0200
Anatolij Gustschin agust at denx.de wrote:

> Migration to DM_VIDEO driver is long overdue. Update defconfig
> to enable usage of converted ipuv3 driver DM configuration.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Jason Liu <jason.hui.liu@nxp.com>
> ---
>  configs/mx53loco_defconfig | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)

Applied to u-boot-video/next, thanks!

--
Anatolij