From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Tue, 30 Jun 2020 14:48:47 -0400 Subject: [PATCH 2/4] omap3_beagle: Disable USB support In-Reply-To: References: <20200630165650.9540-1-trini@konsulko.com> <20200630165650.9540-2-trini@konsulko.com> <20200630171425.GX1306@bill-the-cat> Message-ID: <20200630184847.GY1306@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Jun 30, 2020 at 12:35:31PM -0500, Adam Ford wrote: > On Tue, Jun 30, 2020 at 12:14 PM Tom Rini wrote: > > > > On Tue, Jun 30, 2020 at 12:07:51PM -0500, Adam Ford wrote: > > > On Tue, Jun 30, 2020 at 11:56 AM Tom Rini wrote: > > > > > > > > Disable USB support for now. There is non-trivial work required to > > > > fully move the OMAP3 platforms to DM. While this work is in-progress, > > > > disable USB support for now as we've gone well past the migration > > > > deadline. > > > > > > > > Cc: Adam Ford > > > > Signed-off-by: Tom Rini > > > > --- > > > > > > I don't have a beagle, but I have DM_USB working on two different > > > OMAP3 boards. I am curious to know what's left or what's not working. > > > > Oh? I thought when we talked last there was still more to do to fully > > migrate things over. Where should I check again to see what I need to > > do on beagle to convert it over? Thanks! > > With [1], the DM support for the EHCI controller was added. There is > still some work to be done to make it better, because there are still > some #defines that need to assign the reset GPIO's. Ideally we'd get > rid of the GPIO defines and use the device tree to address the reset. > It isn't perfect, but it's better than having no USB at all. The > am3517_evm and omap3_logic_somlv have them working. Make sure the > board files have the legacy USB stuff removed [2] > > [1] - https://gitlab.denx.de/u-boot/u-boot/-/commit/94ed66194f150c308d1713965a28abce3ac6e200 > [2] - https://gitlab.denx.de/u-boot/u-boot/-/commit/76f6d52e61a1968702af69d6cea463b9d9332a96 > > Let me know if there is anything I can do to help. Hunh, thanks. I thought I had tried this much before but had things blow up. With [2] it's a quick conversion and passing basic sanity checks. Thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: